This will prefill all the settings so users can report things better.
Change-Id: I1ccfd3a2c6835489db1fd2ba71aee39058ffe597
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256872
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Some users get repo from their distro (e.g. /usr/bin/repo), so the
suggestion to copy over top of it makes people uneasy, if it's even
possible in the first place.
Bug: https://crbug.com/gerrit/12335
Change-Id: I9a0c83d6ba0f466fa8e6d61f674ee13396f9a968
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256893
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
We often ask users what OS/version they're running when debugging.
Include that in the version output to simplify the process.
Change-Id: Ie480b6d1c874e6f4c6f4996a03795077b844f858
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256732
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Draft CLs were replaced by private/wip CLs in Gerrit instead years ago.
Change-Id: If4f3d6606aad40a6f1617a49681dfd45c64d3d37
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256673
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Trying to use the config state when the git tree hasn't yet been
created hits bad side effects. Add a check to avoid probing the
config logic during the first run. It's not clear what's going
wrong at the lower layers, but this gets us back to the behavior
before we added worktree support, so lets settle the status quo.
Bug: https://crbug.com/gerrit/12387
Change-Id: I85b56797455f3c2e249d02c18496e060be05501d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256592
Reviewed-by: Xin Li <delphij@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Add a helper to our git wrapper to find the .git subdir,
and then use that to detect internal rebase state.
Change-Id: I3b3b6ed4c1f45cc8c3c98dc19c7ca3aabdc46905
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256532
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Still use the repo manifest by default as before, but gives us
the option of overriding it to support e.g.: using a subset of
the full manifest.
Change-Id: Ia42cd1cb3a0a58929d31bb01c9724e9d31f68730
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256372
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Sean McAllister <smcallis@google.com>
We produce some simple "Get" messages that aren't super clear as to
what they're doing, especially for people not familiar with repo.
Rephrase these to explicitly state the thing we're doing so it's
clear why we're downloading a particular source.
Bug: https://crbug.com/gerrit/11293
Change-Id: I0749504f17c5385c6c65274a274e0ae25b117413
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256455
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
We don't use these for much yet, but init passes it down to the
project sync layers which already has support for verbose mode.
Change-Id: I651794f1b300be1688eeccf3941ba92c776812b5
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256454
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
This copies the output style we use in git_command for showing output
and input redirections.
Change-Id: I449b27e7b262e1b30b24333109a1d91d9c7b1ce7
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256453
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Add a section on worktrees to avoid symlink problems, and
note that Python 3 is now a hard requirement.
Change-Id: I83811db88692127c40cec8270f6f9486c639dc3f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256314
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Git likes to create .git files with read-only permissions which makes
it difficult to open+truncate+write in situ under Windows. Delete it
before we write the file content to workaround.
Change-Id: I3effd96525f0dfe0b90e298b6bf0b856ea26aa03
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256412
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Changing this to a file instead of using a symlink serves two purposes:
* We can insert some comments & doc links to help users learn what this
is for, discover relevant documentation, and to discourage them from
modifying things.
* Windows requires Administrator access to use symlinks. With this
last change, Windows users can get repo client checkouts with the new
--worktree option and not need symlinks anywhere at all. Which means
they no longer need to be an Administrator in order to `repo sync`.
Change-Id: I9bc46824fd8d4b0f446ba84bd764994ca1e597e2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256313
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Windows requires Administrator access to create symlinks. We can
mitigate this a bit by falling back to hardlinks as those may be
created by any user on the system. Do this with the git hooks as
these are supposed to be internal only and people shouldn't be
modifying them. If they do, they'll have to delink first. This
seems worth it to allow repo usage without extra privileges.
Change-Id: I996ea9c9238f7bd7d27d1d9b1f2786593bf75ef7
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256312
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
We also need to check more things in the manifest/project handlers,
and use platform_utils in a few places to address Windows behavior.
Drop Python 2.7 from Windows testing as it definitely doesn't work
and we won't be fixing it.
Change-Id: I83d00ee9f1612312bb3f7147cb9535fc61268245
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256113
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
We're using this for git worktrees because it handles the .git file
format, but it should work for all flows. Unify to simplify. This
also fixes the worktree logic which duplicated .git/config settings.
Change-Id: Ie3af2e206710859dccfc376b3593f415d6830738
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256034
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
Switch the copyright holder to "The Android Open Source Project" to
match all the other source files in the tree, and move it to the top
of the file to match everything else we do.
Change-Id: Ie15d8e2bc004a626e45f715271deeaf3919dc44a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256235
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Also fix the normal output to write to stdout.
Change-Id: I6c117eea9cec08f5be9a44b90dbe9bf1f824ec95
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256114
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
- E129 visually indented line with same indent as next logical line
- E125 continuation line with same indent as next logical line
Fixed automatically by:
autopep8 --in-place --select E125,E129 subcmds/sync.py
Change-Id: Ia2f82f443e1e6a23ba22c6f9849c8485405aed0e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256092
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: David Pursehouse <dpursehouse@collab.net>
This supports [alias] sections with repo subcommands just like git.
Change-Id: Ie9235b5d4449414e6a745814f0110bd6af74ea93
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255833
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
This allows people to write ~/.repoconfig/config akin to ~/.gitconfig
and .repo/config akin to .git/config. This allows us to add settings
specific to repo without mixing up git, and to persist in general.
Change-Id: I1c6fbe31e63fb8ce26aa85335349c6ae5b1712c6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255832
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Since deleting a source checkout involves a good bit of internal
knowledge of .repo/, move the DeleteProject helper out of the sync
code and into the Project class itself. This allows us to add git
worktree support to it so we can unlock/unlink project checkouts.
Change-Id: If9af8bd4a9c7e29743827d8166bc3db81547ca50
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256072
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When using extensions, make sure we set the git repo format version
so git knows to check the extension compatibility. We can add a
helper to the Project API to simplify this and make it foolproof.
Change-Id: I9ab6c32d92fe2b8e5df6e2b080ca71556332e909
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256035
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
Make it clear that the paths have a .git suffix, and clarify the
reason for not using remote servers in the layout.
Change-Id: I62c6977ee6f4e1e9882d45727eb239cf5489d2b6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256033
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Hopefully enough issues should be resolved now that we can start
forcing Windows users into Python 3 too.
Change-Id: Ic4aad6a0b35ffec7d1372e3da6fca11a2b6fde0b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255353
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
This provides initial support for using git worktrees internally
instead of our own ad-hoc symlink tree. It's been lightly tested
which is why it's not currently exposed via --help.
When people opt-in to worktrees in an existing repo client checkout,
no projects are migrated. Instead, only new projects will use the
worktree method. This allows for limited testing/opting in without
having to completely blow things away or get a second checkout.
Bug: https://crbug.com/gerrit/11486
Change-Id: Ic3ff891b30940a6ba497b406b2a387e0a8517ed8
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254075
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Different Python & OS versions have different environ behavior wrt
accepted types & encoding. Since we're migrating to be Python 3 only,
lets change our code to assume strings always work as that's what the
newer Python 3 does. This will fail under Python 2 for some env vars,
mostly on Windows, but the effort of maintaining shim layers that can
handle these edge cases isn't worth it when we're dropping that code.
We leave the logic in the `repo` launcher for now as it is simple, and
we want it to be able to switch versions a bit longer than the rest of
the tree.
Here's the support table:
| *NIX | Windows |
Python 2 | ASCII string | str or bytes, not unicode |
Python 3 | str or bytes | str only |
Windows uses strings natively in its environment all the time. But it
doesn't allow unicode strings under Python 2, so we have to encode.
Python 2 on *NIX is funky in that it always lowers to ASCII, so we had
to manually encode to avoid errors regardless of unicode or str.
Python 3 on Windows & *NIX will accept strings. *NIX will also accept
bytes but Windows will not.
Bug: https://crbug.com/gerrit/12145
Change-Id: I3cf8f95a06902754ea1f08ad4b28503f7063531b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/248972
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
This adds a CLI option to the existing autoupload gitconfig knob that
allows people to automatically answer "yes" to the various prompts.
Bug: https://crbug.com/gerrit/12368
Change-Id: I819ebca01b9a40240b33866ae05907c7469703e3
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255892
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
This allows users to specify custom hashtags when uploading, both via
the CLI and via the same gitconfig settings as other upload options.
Bug: https://crbug.com/gerrit/11174
Change-Id: Ia0959e25b463e5f29d704e4d06e0de793d4fc77c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255855
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
For people used to running `repo xxx --help`, they might not realize
that there are detailed man pages behind `repo help xxx`. Add a note
to all --help commands to improve discoverability.
Change-Id: I84af58aa0514cc7ead185f6c2534a8f88e09a236
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255853
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
If we're not in --verbose mode with repo sync, then omit the
per-project clone bundle progress bar.
Bug: https://crbug.com/gerrit/11293
Change-Id: Ibdf3be86d35fcbccbf6788c192189f38c577e6e9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255854
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
The pager setting is tristate (where None means "auto"),
so make sure we still handle that setting.
Change-Id: I89fe352572dd15922c61e3bb65ac33f847d01ee0
Test: `repo help upload` triggers the pager
Test: `repo -p help upload` triggers the pager
Test: `repo --no-pager help upload` doesn't trigger the pager
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255852
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Show clearer messages and exit non-zero if there's nothing to upload.
Change-Id: Icd9c13b9b1126610a409fc13d1d11bfc66f5e802
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255834
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Trying to use booleans with names like "no_xxx" are hard to follow due
to the double negatives. Invert all of them so we only have positive
meanings to follow.
Change-Id: Ifd37d0368f97034d94aa2cf38db52c723ac0c6ed
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255493
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Named Temporary file defaults to mode 'w+b' which causes repo sync to
fail. By opening the tmpcookiefile in PersistentTransport.request as
writable, we are able to run sync successfully.
Bug: https://crbug.com/gerrit/12370
Test: Ran smartsync successfully
Change-Id: I01ddf915fc30eb3ff0e4d440a6f1aa261c63e88d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255692
Tested-by: Jonathan Nieder <jrn@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
If an older launcher script is used with newer repo source tree, we
might be issuing python version warnings. Plus, we want to be able
to roll Python version requirements independently of the launcher.
Add some version checking here too.
Change-Id: Ia35fc821f93c429296bdf5fd578276fef796b649
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255592
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
All the stdlib imports are supposed to come before any local imports.
Change-Id: I10c0335ba2ff715fd34c9eb91bfe6560e904df08
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255593
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Syncing projects works fine the majority of the time. So rather than
dump all of that noisy output to stdout, lets capture it and only show
when things fail or in verbose mode. This tidies up the default `repo
sync` output.
Bug: https://crbug.com/gerrit/11293
Change-Id: I8314dd92e1e6aadeb26e36a8c92610da419684e6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255413
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
