This is a pretty common option for people to want too use, so include
it as a pass-thru option when cherry-picking.
Bug: https://crbug.com/gerrit/9418
Change-Id: I2a24c1ed7544541719caa4d3c0574347a151a1b0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/259853
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
The git cherry-pick already supports this, so plumb the existing repo
option down. Otherwise it's confusing when people use -c --ff and it
doesn't use that behavior.
Change-Id: Id68932ffa09204bb30b92a21aff185c00394a520
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/259852
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
We refer to this as "revision" in help text, and in REPO_REV envvar,
so rename to --repo-rev to be consistent. We keep --repo-branch for
backwards compatibility, but as a hidden option.
Bug: https://crbug.com/gerrit/11045
Change-Id: I1ecc282fba32917ed78a63850360c08469db849a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/259352
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
When the launcher handles the init subcommand, it takes care of
setting the repo url & branch itself when cloning. So we don't
need to pass them down to the checked out init subcommand.
Further, the init subcommand has never actually done anything
with those options, so there's no point in passing them.
We'll be changing the latter behavior so that init will reset
the url/branch when specified with an existing repo checkout
which means passing them through adds overhead: the launcher
will checkout to the right value, then chain to the sub-init
which will then reset the checkout to the same value.
Bug: https://crbug.com/gerrit/11045
Change-Id: Ia2a4ab9d86febc470aea4abd73d75bb10e848b56
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/259312
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
We respect this option when running the first `repo init`, but then
silently ignore it once the initial sync is done. Make sure users
are able to change things on the fly.
Bug: https://crbug.com/gerrit/11045
Change-Id: I129ec5fec43a85067d555bb60c0d1ae02465f139
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/258893
Tested-by: David Pursehouse <dpursehouse@collab.net>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Since tracking a branch prevents repo from updating, make sure we
warn people about the situation when using `repo sync`.
Bug: https://crbug.com/gerrit/11045
Change-Id: I966513f510827cc93194f8df176c6745946bd739
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/258892
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
The current subcmds design has singletons in all_commands. This isn't
exactly unusual, but the fact that our main & help subcommand will then
attach members to the classes before invoking them is. This makes it
hard to keep track of what members a command has access to, and the two
code paths (main & help) attach different members depending on what APIs
they then invoke.
Lets pull this back a step by storing classes in all_commands and leave
the instantiation step to when they're used. This doesn't fully clean
up the confusion, but gets us closer.
Change-Id: I6a768ff97fe541e6f3228358dba04ed66c4b070a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/259154
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
The branch->branches alias is setup in the main module when that
really belongs in the existing all_commands setup.
For help, rather than monkey patching all_commands to the class,
switch it to use the state directly from the module. This makes
it a bit more obvious where it's coming from rather than this one
subcommand having a |commands| member added externally to it.
Change-Id: I0200def09bf4774cad8012af0f4ae60ea3089dc0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/259153
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
When we download git sources, we get a progress bar (good) and we get
a dump of all the refs we downloaded (bad) as it can easily be 100+ if
not 1000+ depending on the project (for each git repo!). Lets rework
the output behavior so that:
* quiet: Only errors.
* default: Progress bars (if on a tty).
* verbose: Full output (progress bars & downloaded refs).
Bug: https://crbug.com/gerrit/11293
Change-Id: I87a380075e79de6805f91095876dd1b37d32873a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256456
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Michael Mortensen <mmortensen@google.com>
We've been overly lenient with boolean parsing by ignoring invalid
values as "false" even if the user didn't intend that. Turn all
unknown values into warnings to avoid breaking existing manifests,
and unify the parsing logic in a helper to simplify.
We've been stricter about numbers, but still copying & pasting
inconsistent code. Add a helper for this too. For out of range
sync-j numbers (i.e. less than 1), throw a warning for now, but
mark it for future hard failures.
Change-Id: I924162b8036e6a5f1e31b6ebb24b6a26ed63712d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256457
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Now that repo 2 requires Python 3, we can reland this.
This reverts commit 91d9587e45.
Change-Id: Id5b178ebb53bdba04bfa79cbb5c698ae5080c957
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/258672
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Theodore Dubois <tbodt@google.com>
Enable using --pretty-format to build a custom subject line
even when using the --raw option.
Change-Id: I0c1e682d984e56698fe65939aa6de12a653cd0f1
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/258565
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Connor Newton <connor@ifthenelse.io>
This is a dict to index, not a function to call.
Change-Id: I0117eeaaa8b2ef4762ab6f0d22f9ffdaee961f52
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/258132
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Since most ref namespaces are shared among all worktrees, trying to
set the pseudo m/<branch> in the common git repo ends up clobbering
each other when using shared checkouts. For example, in CrOS:
<project path="src/third_party/kernel/v3.8"
name="chromiumos/third_party/kernel"
revision="refs/heads/chromeos-3.8" />
<project path="src/third_party/kernel/v3.10"
name="chromiumos/third_party/kernel"
revision="refs/heads/chromeos-3.10" />
Trying to set m/master in chromiumos/third_party/kernel.git/ will
keep clobbering the other.
Instead, when using git worktrees, lets set the m/ pseudo ref to
point into the refs/worktree/ namespace which is unique to each
git worktree. So we have in the common dir:
chromiumos/third_party/kernel.git/:
refs/remotes/m/master:
ref: refs/worktree/m/master
And then in each worktree we point refs/worktree/m/master to the
respective manifest revision expression. Now people can use the
m/master in each git worktree and have it resolve to the right
commit for that worktree.
Bug: https://crbug.com/gerrit/12404
Change-Id: I78814bdd5dd67bb13218c4c6ccd64f8a15dd0a52
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256952
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
This will prefill all the settings so users can report things better.
Change-Id: I1ccfd3a2c6835489db1fd2ba71aee39058ffe597
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256872
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Some users get repo from their distro (e.g. /usr/bin/repo), so the
suggestion to copy over top of it makes people uneasy, if it's even
possible in the first place.
Bug: https://crbug.com/gerrit/12335
Change-Id: I9a0c83d6ba0f466fa8e6d61f674ee13396f9a968
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256893
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
We often ask users what OS/version they're running when debugging.
Include that in the version output to simplify the process.
Change-Id: Ie480b6d1c874e6f4c6f4996a03795077b844f858
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256732
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Draft CLs were replaced by private/wip CLs in Gerrit instead years ago.
Change-Id: If4f3d6606aad40a6f1617a49681dfd45c64d3d37
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256673
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Trying to use the config state when the git tree hasn't yet been
created hits bad side effects. Add a check to avoid probing the
config logic during the first run. It's not clear what's going
wrong at the lower layers, but this gets us back to the behavior
before we added worktree support, so lets settle the status quo.
Bug: https://crbug.com/gerrit/12387
Change-Id: I85b56797455f3c2e249d02c18496e060be05501d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256592
Reviewed-by: Xin Li <delphij@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Add a helper to our git wrapper to find the .git subdir,
and then use that to detect internal rebase state.
Change-Id: I3b3b6ed4c1f45cc8c3c98dc19c7ca3aabdc46905
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256532
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Still use the repo manifest by default as before, but gives us
the option of overriding it to support e.g.: using a subset of
the full manifest.
Change-Id: Ia42cd1cb3a0a58929d31bb01c9724e9d31f68730
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256372
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Sean McAllister <smcallis@google.com>
We produce some simple "Get" messages that aren't super clear as to
what they're doing, especially for people not familiar with repo.
Rephrase these to explicitly state the thing we're doing so it's
clear why we're downloading a particular source.
Bug: https://crbug.com/gerrit/11293
Change-Id: I0749504f17c5385c6c65274a274e0ae25b117413
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256455
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
We don't use these for much yet, but init passes it down to the
project sync layers which already has support for verbose mode.
Change-Id: I651794f1b300be1688eeccf3941ba92c776812b5
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256454
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
This copies the output style we use in git_command for showing output
and input redirections.
Change-Id: I449b27e7b262e1b30b24333109a1d91d9c7b1ce7
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256453
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Add a section on worktrees to avoid symlink problems, and
note that Python 3 is now a hard requirement.
Change-Id: I83811db88692127c40cec8270f6f9486c639dc3f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256314
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Git likes to create .git files with read-only permissions which makes
it difficult to open+truncate+write in situ under Windows. Delete it
before we write the file content to workaround.
Change-Id: I3effd96525f0dfe0b90e298b6bf0b856ea26aa03
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256412
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Changing this to a file instead of using a symlink serves two purposes:
* We can insert some comments & doc links to help users learn what this
is for, discover relevant documentation, and to discourage them from
modifying things.
* Windows requires Administrator access to use symlinks. With this
last change, Windows users can get repo client checkouts with the new
--worktree option and not need symlinks anywhere at all. Which means
they no longer need to be an Administrator in order to `repo sync`.
Change-Id: I9bc46824fd8d4b0f446ba84bd764994ca1e597e2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256313
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Windows requires Administrator access to create symlinks. We can
mitigate this a bit by falling back to hardlinks as those may be
created by any user on the system. Do this with the git hooks as
these are supposed to be internal only and people shouldn't be
modifying them. If they do, they'll have to delink first. This
seems worth it to allow repo usage without extra privileges.
Change-Id: I996ea9c9238f7bd7d27d1d9b1f2786593bf75ef7
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256312
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
We also need to check more things in the manifest/project handlers,
and use platform_utils in a few places to address Windows behavior.
Drop Python 2.7 from Windows testing as it definitely doesn't work
and we won't be fixing it.
Change-Id: I83d00ee9f1612312bb3f7147cb9535fc61268245
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256113
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
We're using this for git worktrees because it handles the .git file
format, but it should work for all flows. Unify to simplify. This
also fixes the worktree logic which duplicated .git/config settings.
Change-Id: Ie3af2e206710859dccfc376b3593f415d6830738
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256034
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
Switch the copyright holder to "The Android Open Source Project" to
match all the other source files in the tree, and move it to the top
of the file to match everything else we do.
Change-Id: Ie15d8e2bc004a626e45f715271deeaf3919dc44a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256235
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Also fix the normal output to write to stdout.
Change-Id: I6c117eea9cec08f5be9a44b90dbe9bf1f824ec95
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256114
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
- E129 visually indented line with same indent as next logical line
- E125 continuation line with same indent as next logical line
Fixed automatically by:
autopep8 --in-place --select E125,E129 subcmds/sync.py
Change-Id: Ia2f82f443e1e6a23ba22c6f9849c8485405aed0e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256092
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: David Pursehouse <dpursehouse@collab.net>
This supports [alias] sections with repo subcommands just like git.
Change-Id: Ie9235b5d4449414e6a745814f0110bd6af74ea93
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255833
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
This allows people to write ~/.repoconfig/config akin to ~/.gitconfig
and .repo/config akin to .git/config. This allows us to add settings
specific to repo without mixing up git, and to persist in general.
Change-Id: I1c6fbe31e63fb8ce26aa85335349c6ae5b1712c6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255832
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Since deleting a source checkout involves a good bit of internal
knowledge of .repo/, move the DeleteProject helper out of the sync
code and into the Project class itself. This allows us to add git
worktree support to it so we can unlock/unlink project checkouts.
Change-Id: If9af8bd4a9c7e29743827d8166bc3db81547ca50
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256072
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When using extensions, make sure we set the git repo format version
so git knows to check the extension compatibility. We can add a
helper to the Project API to simplify this and make it foolproof.
Change-Id: I9ab6c32d92fe2b8e5df6e2b080ca71556332e909
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256035
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
Make it clear that the paths have a .git suffix, and clarify the
reason for not using remote servers in the layout.
Change-Id: I62c6977ee6f4e1e9882d45727eb239cf5489d2b6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256033
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Hopefully enough issues should be resolved now that we can start
forcing Windows users into Python 3 too.
Change-Id: Ic4aad6a0b35ffec7d1372e3da6fca11a2b6fde0b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255353
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
