repo status just prints "# on branch oprofile" if you have branched
in clean status. This doesn't really tell which branch is meant.
Instead we can use the same syntax with modified gits which will
give us detailed information.
Change-Id: I55fe5154d278e10a814281dd2ba501ec6e956730
This parameter changes the manifest used by 'repo sync' for only
this execution. It should be useful for developers wishing to get
the repo temporarily into a known state, without clobbering their
existing manifest.
Tested by shifting Chrome OS between minilayout and full, and
between several release-builder-generated manifests.
Change-Id: I14194b665195b0e78f368d9ec8b8a83227af2627
This reverts commit ee1c2f5717.
This breaks a lot of buildbot systems. Rolling it back for now
until we can understand what the breakage was and how to fix it.
If the user has already configured a workspace, use these values
when re-running 'repo init'.
Otherwise, if the user has global name and e-mail set, use these.
It's always possible to override this and be prompted by specifying
--config-name when running 'repo init'.
Change-Id: If45f0e4b14884071439fb02709dc5cb53f070f60
A default manifest URL can be specified using:
git config --global repo-manifest.<id>.url <url>
A default manifest server can be specified using:
git config --global repo-manifest.<id>.server <url>
A default git mirror reference can be specified using:
git config --global repo-manifest.<id>.reference <path>
This will allow the user to use 'repo init -u <id>' as
a shorter alternative to specifying the full URL.
Also, manifest server will not have to be specified in the
manifest XML and the reference will not have to be specified
on the command line. If they are, they will override these
default values however.
Change-Id: Ifdbc160bd5909ec7df9efb0c5d7136f1d9351754
Signed-off-by: Victor Boivie <victor.boivie@sonyericsson.com>
Several times one have done an upload only to later notice in gerrit
that the upload was done to the wrong branch as the git has not yet
been branched for the current git. This change will make repo print
what the destination branch is when asking the user if she wants to
go through with the upload.
Change-Id: Ia9c3a92a6a04c022edfebf4f8d651ac062bb1f3b
It is common in command line tools to indicate what the default answer
will be if the user simply hits enter. In repo, the display is just
"y/n" with no indication as to which is the default. So change the n
to N in the messages since that is how repo operates.
Change-Id: I81819ae630355072eb0365e59168b0921289498f
When commit with comment that has non-ASCII characters,
UnicodeDecodeError will be raised
while uploading multiple project/branch changes.
Because some strings in script are not str type, but unicode.
So all the strings are decoded to unicode,
and python use ascii to do this,
it can not decode non-ASCII characters,
so UnicodeDecodeError raised.
Signed-off-by: chenguodong <chenguodong@huawei.com>
Change-Id: I46447f489a4b9760a5899c7ba9d764b688594e46
There is also shortcuts in case if the "current branch" is
a persistent revision such as tag or sha1. We check if the
persistent revision is present locally and if it does - do
no fetch anything from the server.
This greately reduces sync time and size of the on-disk repo
Change-Id: I23c6d95185474ed6e1a03c836a47f489953b99be
help sync crashed as sync required the manifest to be configured to
create the option parser, as the default number of jobs is required.
Change-Id: Ie75e8d75ac0e38313e4aab451cbb24430e84def5
Signed-off-by: Shawn O. Pearce <sop@google.com>
An HTTP (or HTTPS) based remote server may now offer a 'clone.bundle'
file in each repository's Git directory. Over an http:// or https://
remote repo will first ask for '$URL/clone.bundle', and if present
download this to bootstrap the local client, rather than relying
on the native Git transport to initialize the new repository.
Bundles may be hosted elsewhere. The client automatically follows a
HTTP 302 redirect to acquire the bundle file. This allows servers
to direct clients to cached copies residing on content delivery
networks, where the bundle may be closer to the end-user.
Bundle downloads are resumeable from where they last left off,
allowing clients to initialize large repositories even when the
connection gets interrupted.
If a bundle does not exist for a repository (a HTTP 404 response
code is returned for '$URL/clone.bundle'), the native Git transport
is used instead. If the client is performing a shallow sync, the
bundle transport is not used, as there is no way to embed shallow
data into the bundle.
Change-Id: I05dad17792fd6fd20635a0f71589566e557cc743
Signed-off-by: Shawn O. Pearce <sop@google.com>
If the manifest is updated and the default sync-j attribute
was modified, honor it during this sync session if the user
has not supplied a -j flag on the command line.
Change-Id: I127ee5c779e2bbbb40b30bddc10ec1fa704b3bf3
Signed-off-by: Shawn O. Pearce <sop@google.com>
This permits manifest authors to suggest a number of parallel
fetch operations against a remote server. For example, Gerrit
Code Review servers support queuing of requests and processes
them in first-in, first-out order. Running concurrent fetches
can utilize multiple CPUs on the Gerrit server, but will also
decrease overall operation latency by having the request put
into the queue ready to execute as soon as a CPU is free.
Change-Id: I3d3904acb6f63516bae4b071c510ad57a2afab18
Signed-off-by: Shawn O. Pearce <sop@google.com>
Each worker thread requires at least 3 file descriptors to run the
forked 'git fetch' child to operate against the local repository.
Mac OS X has the RLIMIT_NOFILE set to 256 by default, which means
a sync -j128 often fails when the workers run out of pipes within
the Python parent process.
Change-Id: I2cdb14621b899424b079daf7969bc8c16b85b903
Signed-off-by: Shawn O. Pearce <sop@google.com>
This is an evolution of 'smart-sync' that adds a new option, -t,
that allows you to specify a tag/label to use instead of the
"latest good build" on the current manifest branch which -s does.
Signed-off-by: Victor Boivie <victor.boivie@sonyericsson.com>
Change-Id: I8c20fd91104a6aafa0271d4d33f6c4850aade17e
This commit adds a --br=<branch> option to repo upload.
repo currently examines every non-published branch. This is problematic
for my workflow. I have many branches in my kernel tree. Many of these
branches are based off of upstream remotes (I have many remotes) and
will never be uploaded (they'll get sent upstream as a patch).
Having repo scan these branches adds to my upload processing time
and clutters the branch selection buffer. I've also seen repo get
confused when one of my branches is 1000s of commits different from
m/master.
Change-Id: I68fa18951ea59ba373277b57ffcaf8cddd7e7a40
It is undesired to have the same Change-Id:-line for two separate
commits, and when cherry-picking, the user must manually change it.
If this is not done, bad things may happen (such as when the user
is uploading the cherry-picked commit to Gerrit, it will instead
see it as a new patch-set for the original change, or worse).
repo cherry-pick works the same was as git cherry-pick, except that
it replaces the Change-Id with a new one and adds a reference
back to the commit from where it was picked.
On failures (when git can not successfully apply the cherry-picked
commit), instructions will be written to the user.
Change-Id: I5a38b89839f91848fad43386d43cae2f6cdabf83
In the current version of repo checkout, we often get the error:
error: no project has branch xyzzy
...even when the actual error was something else. This fixes it
to only report the 'no project has branch' when that is actually true.
This fix is very similar to one made for 'repo abandon':
https://review.source.android.com/#change,22207
The repo checkout error is filed as: <http://crosbug.com/6514>
TEST=manual
A sample creating a case where 'git checkout' will fail:
$ repo start branch1 .
$ repo start branch2 .
$ touch bogusfile
$ git add bogusfile
$ git commit -m "create bogus file"
[branch2 f8b6b08] create bogus file
0 files changed, 0 insertions(+), 0 deletions(-)
create mode 100644 bogusfile
$ echo "More" >> bogusfile
$ repo checkout branch1 .
error: chromite/: cannot checkout branch1
A sample case showing that we still fail if no project has a branch:
$ repo checkout xyzzy .
error: no project has branch xyzzy
Change-Id: I48a8e258fa7a9c1f2800dafc683787204bbfcc63
This is the simplest fix: if we had problems syncing the
manifest.git directory and we were the ones that created it,
we should delete it. This doesn't try to do anything complex
like try to recover from a .repo directory that got broken in
some other way.
This is filed as: <http://crosbug.com/13403>
TEST=manual
Init once with a bad URL:
$ repo init -u http://foobar.example.com
Getting manifest ...
from http://foobar.example.com
Connection closed by 172.22.121.77
error: Couldn't resolve host 'foobar.example.com' while accessing http://foobar.example.com/info/refs
fatal: HTTP request failed
fatal: cannot obtain manifest http://foobar.example.com
Init again: identical to the first. Good:
$ repo init -u http://foobar.example.com
Getting manifest ...
from http://foobar.example.com
Connection closed by 172.22.121.77
error: Couldn't resolve host 'foobar.example.com' while accessing http://foobar.example.com/info/refs
fatal: HTTP request failed
fatal: cannot obtain manifest http://foobar.example.com
Init with correct URL:
$ repo init -u http://git.chromium.org/git/manifest -m minilayout.xml
Getting manifest ...
from http://git.chromium.org/git/manifest
[ ... cut ... ]
repo initialized in /.../repoiniterr
Try a bad URL after a good one; it doesn't get saved (good):
$ repo init -u http://foobar.example.com
Connection closed by 172.22.121.77
error: Couldn't resolve host 'foobar.example.com' while accessing http://foobar.example.com/info/refs
fatal: HTTP request failed
fatal: cannot obtain manifest http://foobar.example.com
Just to confirm, I can still do a good one after a bad...
$ repo init -u http://git.chromium.org/git/manifest -m minilayout.xml
Your Name [George Washington]:
Your Email [george@washington.example.com]:
Your identity is: George Washington <george@washington.example.com>
is this correct [y/n]? y
repo initialized in /.../repoiniterr
Change-Id: I1692821a330d97b1d218b2e191a93245b33f2362
The main fix is to give an error message if nothing was actually
abandoned. See <http://crosbug.com/6041>.
The secondary fix is to list projects where the abandon happened.
This could be done in a separate CL or dropped altogether if requested.
TEST=manual
$ repo abandon dougabc; echo $?
Abandon dougabc: 100% (127/127), done.
Abandoned in 2 project(s):
chromite
src/platform/init
0
$ repo abandon dougabc; echo $?
Abandon dougabc: 100% (127/127), done.
error: no project has branch dougabc
1
$ repo abandon dougabc; echo $?
Abandon dougabc: 100% (127/127), done.
error: chromite/: cannot abandon dougabc
1
Change-Id: I79520cc3279291acadc1a24ca34a761e9de04ed4
Event.isSet was renamed to is_set in 2.6, but we should
use the earlier syntax to avoid breaking compatibility
with older Python installations.
Change-Id: I41888ed38df278191d7496c1a6eed15e881733f4
The bug that this is fixing is described here:
http://code.google.com/p/chromium-os/issues/detail?id=6813
This fix allows the helper threads to signal the main thread that they
saw an error. When the main thread sees the error, it will let all
existing threads finish, then exit with an error.
Change-Id: If3019bc6b0b3ab9304d49ed2eea53e9d57f3095a
All repo-level hooks are expected to live in a single project at the
top level of that project. The name of the hooks project is provided
in the manifest.xml. The manifest also lists which hooks are enabled
to make it obvious if a file somehow failed to sync down (or got
deleted).
Before running any hook, we will prompt the user to make sure that it
is OK. A user can deny running the hook, allow once, or allow
"forever" (until hooks change). This tries to keep with the git
spirit of not automatically running anything on the user's computer
that got synced down. Note that individual repo commands can add
always options to avoid these prompts as they see fit (see below for
the 'upload' options).
When hooks are run, they are loaded into the current interpreter (the
one running repo) and their main() function is run. This mechanism is
used (instead of using subprocess) to make it easier to expand to a
richer hook interface in the future. During loading, the
interpreter's sys.path is updated to contain the directory containing
the hooks so that hooks can be split into multiple files.
The upload command has two options that control hook behavior:
- no-verify=False, verify=False (DEFAULT):
If stdout is a tty, can prompt about running upload hooks if needed.
If user denies running hooks, the upload is cancelled. If stdout is
not a tty and we would need to prompt about upload hooks, upload is
cancelled.
- no-verify=False, verify=True:
Always run upload hooks with no prompt.
- no-verify=True, verify=False:
Never run upload hooks, but upload anyway (AKA bypass hooks).
- no-verify=True, verify=True:
Invalid
Sample bit of manifest.xml code for enabling hooks (assumes you have a
project named 'hooks' where hooks are stored):
<repo-hooks in-project="hooks" enabled-list="pre-upload" />
Sample main() function in pre-upload.py in hooks directory:
def main(project_list, **kwargs):
print ('These projects will be uploaded: %s' %
', '.join(project_list))
print ('I am being a good boy and ignoring anything in kwargs\n'
'that I don\'t understand.')
print 'I fail 50% of the time. How flaky.'
if random.random() <= .5:
raise Exception('Pre-upload hook failed. Have a nice day.')
Change-Id: I5cefa2cd5865c72589263cf8e2f152a43c122f70
Users may wind up with a lot of loose object content in projects they
don't frequently make changes in, but that are modified by others.
Since we bypass many git code paths that would have otherwise called
out to `git gc --auto`, its possible for these projects to have
their loose object database grow out of control. To help prevent
that, we now invoke it ourselves during the network half of sync.
Signed-off-by: Shawn O. Pearce <sop@google.com>
(cherry picked from commit 1875ddd47c)
Instead of giving a Python backtrace when there is a connectivity
problem during repo upload, report that we cannot access the host,
and why, with a halfway decent error message.
Bug: REPO-45
Change-Id: I9a45b387e86e48073a2d99bd6d594c1a7d6d99d4
Signed-off-by: Shawn O. Pearce <sop@google.com>
(cherry picked from commit d2dfac81ad)
If a project is missing locally, it might be OK to skip over it
and continue running the same command in other projects.
Bug: REPO-43
Change-Id: I64f97eb315f379ab2c51fc53d24ed340b3d09250
Signed-off-by: Shawn O. Pearce <sop@google.com>
(cherry picked from commit d4cd69bdef)
Windows allows the environment to have unicode values.
This will cause Python to fail to execute the command.
Change-Id: I37d922c3d7ced0d5b4883f0220346ac42defc5e9
Signed-off-by: Shawn O. Pearce <sop@google.com>
This feature is used to convey information on a when a branch has
ceased development or if it is an experimental branch with a few
gotchas, etc.
You add it to your manifest XML by doing something like this:
<manifest>
<notice>
NOTE TO DEVELOPERS:
If you checkin code, you have to pinky-swear that it contains no bugs.
Anyone who breaks their promise will have tomatoes thrown at them in the
team meeting. Be sure to bring an extra set of clothes.
</notice>
<remote ... />
...
</manifest>
Carriage returns and indentation are relevant for the text in this tag.
This feature was requested by Anush Elangovan on the ChromiumOS team.
This adds a new flag -f/--force-broken that will allow the rest of
the sync process to continue instead of bailing when a particular
project fails to sync.
Change-Id: I23680f2ee7927410f7ed930b1d469424c9aa246e
Signed-off-by: Andrei Warkentin <andreiw@motorola.com>
Signed-off-by: Shawn O. Pearce <sop@google.com>
It hasn't been necessary for a long time, and its
functionality can be accomplished with 'git push'.
Change-Id: Ic00d3adbe4cee7be3955117489c69d6e90106559
Use git clone to initialize a new repository, and when possible
allow callers to use --reference to reuse an existing checkout as
the initial object storage area for the new checkout.
Change-Id: Ie27f760247f311ce484c6d3e85a90d94da2febfc
Signed-off-by: Shawn O. Pearce <sop@google.com>
--replace started to fail due to a Python error, I forgot to pass
through the opt structure to the replace function.
Change-Id: Ifcd7a0c715c3fd9070a4c58208612a626382de35
Signed-off-by: Shawn O. Pearce <sop@google.com>
Passing through --whitespace=fix to rebase can be useful
to clean up a branch prior to uploading it for review.
Change-Id: Id85f1912e5e11ff9602e3b342c2fd7441abe67d7
Signed-off-by: Shawn O. Pearce <sop@google.com>
Some users might need to use a different login name than the local
part of their email address for their Gerrit Code Review user
account. Allow it to be overridden with the review.HOST.username
configuration variable.
Change-Id: I714469142ac7feadf09fee9c26680c0e09076b75
Signed-off-by: Shawn O. Pearce <sop@google.com>
If the -t flag is given to upload, the local branch name is
automatically sent to Gerrit Code Review as the topic branch name
for the change(s). This requires the server to be Gerrit Code
Review v2.1.3-53-gd50c94e or later, which isn't widely deployed
right now, so the default is opt-out.
Change-Id: I034fcacb405b7cb909147152db427fe69dd7bcbf
Signed-off-by: Shawn O. Pearce <sop@google.com>
Usage: repo rebase [[-i] <project>...]
Rebases the current topic branch of the specified (or all)
projects against the appropriate upstream.
Note: Interactive rebase is currently only supported when
exactly one project is specified on the command line.
Change-Id: I7376e35f27a6585149def82938c1ca99f36db2c4
Signed-off-by: Shawn O. Pearce <sop@google.com>
The upload command will read review.URL.autocopy from the project's
configuration and append the list of e-mails specified to the
--cc argument of the upload command if a non-empty --re argument
was provided.
Change-Id: I2424517d17dd3444b20f0e6a003be6e70b8904f6
Signed-off-by: Shawn O. Pearce <sop@google.com>
This fixes some format string bugs in grep which cause repo to with
"TypeError: not enough arguments for format string" when grepping and
the output contains a valid Python format string.
Change-Id: Ice8968ea106148d409490e4f71a2833b0cc80816
This patch does two things for being compatibile with
those Python which are built without threading support:
1. As the Python document and Shawn suggested, import dummy_threading
when the threading is not available.
2. Reserve the single threaded code and make it default.
In cases the --jobs does not work properly with dummy_threading,
we still have a safe fallback.
Change-Id: I40909ef8e9b5c22f315c0a1da9be38eed8b0a2dc
