We gracefully handle cherry-pick errors, but none of the others
which means people get confusing Python tracebacks. Move the
main logic in a single GitError try block so we can show pretty
error messages for all of them.
Change-Id: I52cdf6468d21a98de7f65b86d5267b3caabd5af8
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/259854
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
The git cherry-pick already supports this, so plumb the existing repo
option down. Otherwise it's confusing when people use -c --ff and it
doesn't use that behavior.
Change-Id: Id68932ffa09204bb30b92a21aff185c00394a520
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/259852
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
When the launcher handles the init subcommand, it takes care of
setting the repo url & branch itself when cloning. So we don't
need to pass them down to the checked out init subcommand.
Further, the init subcommand has never actually done anything
with those options, so there's no point in passing them.
We'll be changing the latter behavior so that init will reset
the url/branch when specified with an existing repo checkout
which means passing them through adds overhead: the launcher
will checkout to the right value, then chain to the sub-init
which will then reset the checkout to the same value.
Bug: https://crbug.com/gerrit/11045
Change-Id: Ia2a4ab9d86febc470aea4abd73d75bb10e848b56
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/259312
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
The current subcmds design has singletons in all_commands. This isn't
exactly unusual, but the fact that our main & help subcommand will then
attach members to the classes before invoking them is. This makes it
hard to keep track of what members a command has access to, and the two
code paths (main & help) attach different members depending on what APIs
they then invoke.
Lets pull this back a step by storing classes in all_commands and leave
the instantiation step to when they're used. This doesn't fully clean
up the confusion, but gets us closer.
Change-Id: I6a768ff97fe541e6f3228358dba04ed66c4b070a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/259154
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
The branch->branches alias is setup in the main module when that
really belongs in the existing all_commands setup.
For help, rather than monkey patching all_commands to the class,
switch it to use the state directly from the module. This makes
it a bit more obvious where it's coming from rather than this one
subcommand having a |commands| member added externally to it.
Change-Id: I0200def09bf4774cad8012af0f4ae60ea3089dc0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/259153
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
When we download git sources, we get a progress bar (good) and we get
a dump of all the refs we downloaded (bad) as it can easily be 100+ if
not 1000+ depending on the project (for each git repo!). Lets rework
the output behavior so that:
* quiet: Only errors.
* default: Progress bars (if on a tty).
* verbose: Full output (progress bars & downloaded refs).
Bug: https://crbug.com/gerrit/11293
Change-Id: I87a380075e79de6805f91095876dd1b37d32873a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256456
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Michael Mortensen <mmortensen@google.com>
We've been overly lenient with boolean parsing by ignoring invalid
values as "false" even if the user didn't intend that. Turn all
unknown values into warnings to avoid breaking existing manifests,
and unify the parsing logic in a helper to simplify.
We've been stricter about numbers, but still copying & pasting
inconsistent code. Add a helper for this too. For out of range
sync-j numbers (i.e. less than 1), throw a warning for now, but
mark it for future hard failures.
Change-Id: I924162b8036e6a5f1e31b6ebb24b6a26ed63712d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256457
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Since most ref namespaces are shared among all worktrees, trying to
set the pseudo m/<branch> in the common git repo ends up clobbering
each other when using shared checkouts. For example, in CrOS:
<project path="src/third_party/kernel/v3.8"
name="chromiumos/third_party/kernel"
revision="refs/heads/chromeos-3.8" />
<project path="src/third_party/kernel/v3.10"
name="chromiumos/third_party/kernel"
revision="refs/heads/chromeos-3.10" />
Trying to set m/master in chromiumos/third_party/kernel.git/ will
keep clobbering the other.
Instead, when using git worktrees, lets set the m/ pseudo ref to
point into the refs/worktree/ namespace which is unique to each
git worktree. So we have in the common dir:
chromiumos/third_party/kernel.git/:
refs/remotes/m/master:
ref: refs/worktree/m/master
And then in each worktree we point refs/worktree/m/master to the
respective manifest revision expression. Now people can use the
m/master in each git worktree and have it resolve to the right
commit for that worktree.
Bug: https://crbug.com/gerrit/12404
Change-Id: I78814bdd5dd67bb13218c4c6ccd64f8a15dd0a52
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256952
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Trying to use the config state when the git tree hasn't yet been
created hits bad side effects. Add a check to avoid probing the
config logic during the first run. It's not clear what's going
wrong at the lower layers, but this gets us back to the behavior
before we added worktree support, so lets settle the status quo.
Bug: https://crbug.com/gerrit/12387
Change-Id: I85b56797455f3c2e249d02c18496e060be05501d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256592
Reviewed-by: Xin Li <delphij@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
We produce some simple "Get" messages that aren't super clear as to
what they're doing, especially for people not familiar with repo.
Rephrase these to explicitly state the thing we're doing so it's
clear why we're downloading a particular source.
Bug: https://crbug.com/gerrit/11293
Change-Id: I0749504f17c5385c6c65274a274e0ae25b117413
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256455
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Git likes to create .git files with read-only permissions which makes
it difficult to open+truncate+write in situ under Windows. Delete it
before we write the file content to workaround.
Change-Id: I3effd96525f0dfe0b90e298b6bf0b856ea26aa03
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256412
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Changing this to a file instead of using a symlink serves two purposes:
* We can insert some comments & doc links to help users learn what this
is for, discover relevant documentation, and to discourage them from
modifying things.
* Windows requires Administrator access to use symlinks. With this
last change, Windows users can get repo client checkouts with the new
--worktree option and not need symlinks anywhere at all. Which means
they no longer need to be an Administrator in order to `repo sync`.
Change-Id: I9bc46824fd8d4b0f446ba84bd764994ca1e597e2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256313
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Windows requires Administrator access to create symlinks. We can
mitigate this a bit by falling back to hardlinks as those may be
created by any user on the system. Do this with the git hooks as
these are supposed to be internal only and people shouldn't be
modifying them. If they do, they'll have to delink first. This
seems worth it to allow repo usage without extra privileges.
Change-Id: I996ea9c9238f7bd7d27d1d9b1f2786593bf75ef7
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256312
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
We also need to check more things in the manifest/project handlers,
and use platform_utils in a few places to address Windows behavior.
Drop Python 2.7 from Windows testing as it definitely doesn't work
and we won't be fixing it.
Change-Id: I83d00ee9f1612312bb3f7147cb9535fc61268245
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256113
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
We're using this for git worktrees because it handles the .git file
format, but it should work for all flows. Unify to simplify. This
also fixes the worktree logic which duplicated .git/config settings.
Change-Id: Ie3af2e206710859dccfc376b3593f415d6830738
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256034
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
Switch the copyright holder to "The Android Open Source Project" to
match all the other source files in the tree, and move it to the top
of the file to match everything else we do.
Change-Id: Ie15d8e2bc004a626e45f715271deeaf3919dc44a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256235
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
- E129 visually indented line with same indent as next logical line
- E125 continuation line with same indent as next logical line
Fixed automatically by:
autopep8 --in-place --select E125,E129 subcmds/sync.py
Change-Id: Ia2f82f443e1e6a23ba22c6f9849c8485405aed0e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256092
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: David Pursehouse <dpursehouse@collab.net>
This allows people to write ~/.repoconfig/config akin to ~/.gitconfig
and .repo/config akin to .git/config. This allows us to add settings
specific to repo without mixing up git, and to persist in general.
Change-Id: I1c6fbe31e63fb8ce26aa85335349c6ae5b1712c6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255832
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Since deleting a source checkout involves a good bit of internal
knowledge of .repo/, move the DeleteProject helper out of the sync
code and into the Project class itself. This allows us to add git
worktree support to it so we can unlock/unlink project checkouts.
Change-Id: If9af8bd4a9c7e29743827d8166bc3db81547ca50
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256072
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When using extensions, make sure we set the git repo format version
so git knows to check the extension compatibility. We can add a
helper to the Project API to simplify this and make it foolproof.
Change-Id: I9ab6c32d92fe2b8e5df6e2b080ca71556332e909
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256035
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
