Uranium: Adding PyClipper

Signed-off-by: Thomas Karl Pietrowski <thopiekar@gmail.com>
Bump version to 4.14
2022-03-05 17:38:55 +01:00 · 2022-02-27 19:09:35 +01:00 · 2022-02-27 13:30:36 +01:00 · 2022-02-27 13:28:20 +01:00 · 2022-02-27 13:28:02 +01:00 · 2022-02-27 13:27:20 +01:00
80 changed files with 744 additions and 400 deletions
--- a/Cura/README.source
+++ b/Cura/README.source
@ -1,4 +1,4 @@
-cura for Debian
+Cura for Debian
 ---------------

 <this file describes information about the source package, see Debian policy
@ -7,4 +7,3 @@ manual section 4.14. You WILL either need to modify or delete this file>


 -- Thomas-Karl Pietrowski <thopiekar@unknown>  Thu, 30 Jul 2015 13:47:20 +0200
-
--- a/Cura/changelog
+++ b/Cura/changelog
@ -1,5 +1,5 @@
-cura (1:3.6) unstable; urgency=low
+cura (1:4.14) unstable; urgency=low

  * Initial release

- -- Thomas Karl Pietrowski <thopiekar@googlemail.com>  Thu, 30 Jul 2015 13:47:20 +0200
+ -- Thomas Karl Pietrowski <thopiekar@gmail.com>  Thu, 30 Jul 2015 13:47:20 +0200
--- a/Cura/control
+++ b/Cura/control
@ -1,14 +1,20 @@
 Source: cura
 Section: graphics
 Priority: optional
-Maintainer: Thomas Karl Pietrowski <thopiekar@googlemail.com>
+Maintainer: Thomas Karl Pietrowski <thopiekar@gmail.com>
 Build-Depends:
- debhelper (>= 9), cmake,
+ debhelper (>= 9),
+ dh-python,
+ cmake,
 python3-dev,
+ python3-dbg,
 python3-uranium, uranium-tools,
+# Qt development tools
 qttools5-dev, qttools5-dev-tools,
+# Generating translations
 gettext,
- python3-pytest, pylint3,
+ python3-pytest,
+ pylint3 | pylint,
 Standards-Version: 3.9.6
 Homepage: https://thopiekar.eu/cura/ppa/
 X-Python3-Version: >= 3.4
@ -24,29 +30,57 @@ Depends:
 # brewed by Ultimaker
 cura-engine,
 cura-resources-materials,
+ python3-charon,
 python3-uranium,
 python3-savitar,
+ python3-pynest2d,
 # QML
 qml-module-qtqml-models2,
- qml-module-qtquick-controls,
- qml-module-qtquick-controls2,
- qml-module-qtquick-dialogs,
+ qml-module-qtquick-controls (>= 5.10),
+ qml-module-qtquick-controls2 (>= 5.10),
+ qml-module-qtquick-dialogs (>= 5.10),
 qml-module-qt-labs-settings,
 qml-module-qt-labs-folderlistmodel,
+# um3networkprinting plugin
+ python3-zeroconf,
 Recommends:
 fonts-open-sans,
 cura-resources-firmware,
 cura-plugins-all,
 python3-numpy-stl,
+ python3-trimesh,
 python3-pyqt5,
 python3-pyqt5.qtwebsockets,
 python3-pyqt5.qtx11extras,
 Provides:
 cura-plugin-api-3,
+ cura-plugin-gcodereader,
+ cura-plugin-postprocessing,
+ cura-plugin-ultimakermachineactions,
+ cura-plugin-um3networkprinting,
+ cura-plugin-usbprinting,
+ cura-plugin-ufpreader,
+ cura-plugin-ufpwriter,
+ cura-plugin-x3dreader,
 ${python3:Provides},
+Conflicts:
+ cura-plugin-ufpwriter,
+ cura-plugin-gcodereader,
+ cura-plugin-postprocessing,
+ cura-plugin-ultimakermachineactions,
+ cura-plugin-um3networkprinting,
+ cura-plugin-usbprinting,
+ cura-plugin-x3dreader,
+Replaces:
+ cura-plugin-gcodereader,
+ cura-plugin-postprocessing,
+ cura-plugin-ultimakermachineactions,
+ cura-plugin-um3networkprinting,
+ cura-plugin-usbprinting,
+ cura-plugin-x3dreader,
 XB-Python3-Version:
 ${python3:Versions},
-Description: GUI G-code generator for 3D printers
+Description: Slicing application for 3-D printers (GUI)
 Cura converts digital 3D models into printing instructions (G-code)
 for your 3D printer. It cuts the model into horizontal slices (layers),
 generates toolpaths to fill them and calculates the amount of material
@ -61,19 +95,13 @@ Description: GUI G-code generator for 3D printers
 Package: cura-plugins-all
 Architecture: all
 Depends:
- cura-plugin-gcodereader,
- cura-plugin-postprocessing,
+ cura-plugin-curadrive,
 cura-plugin-sliceinfo,
- cura-plugin-ufpwriter,
- cura-plugin-ultimakermachineactions,
- cura-plugin-um3networkprinting,
- cura-plugin-usbprinting,
- cura-plugin-x3dreader,
 Provides:
 cura-plugins,
 Enhances:
 cura,
-Description: GUI G-code generator for 3D printers - plugin metapackage
+Description: Slicing application for 3-D printers - plugin metapackage
 Cura converts digital 3D models into printing instructions (G-code)
 for your 3D printer. It cuts the model into horizontal slices (layers),
 generates toolpaths to fill them and calculates the amount of material
@ -85,7 +113,7 @@ Description: GUI G-code generator for 3D printers - plugin metapackage
 .
 This package is a meta package to ensure, that all optional plugins have been installed.

-Package: cura-plugin-gcodereader
+Package: cura-plugin-curadrive
 Architecture: all
 Depends:
 cura-plugin-api-3,
@ -96,7 +124,7 @@ Provides:
 ${python3:Provides},
 XB-Python3-Version:
 ${python3:Versions},
-Description:  GUI G-code generator for 3D printers - G-code reader plugin
+Description: Slicing application for 3-D printers - CuraDrive plugin
 Cura converts digital 3D models into printing instructions (G-code)
 for your 3D printer. It cuts the model into horizontal slices (layers),
 generates toolpaths to fill them and calculates the amount of material
@ -106,30 +134,7 @@ Description:  GUI G-code generator for 3D printers - G-code reader plugin
 for the expert.  It can output G-Code for several series of 3D printers,
 most notably the Ultimaker.
 .
- This package provides a G-code reader.
-
-Package: cura-plugin-postprocessing
-Architecture: all
-Depends:
- cura-plugin-api-3,
- ${shlibs:Depends},
- ${misc:Depends},
- ${python3:Depends},
-Provides:
- ${python3:Provides},
-XB-Python3-Version:
- ${python3:Versions},
-Description:  GUI G-code generator for 3D printers - Post-Processing plugin
- Cura converts digital 3D models into printing instructions (G-code)
- for your 3D printer. It cuts the model into horizontal slices (layers),
- generates toolpaths to fill them and calculates the amount of material
- to be extruded.
- .
- Cura is easy to use for novices and provide over 200 settings to adjust
- for the expert.  It can output G-Code for several series of 3D printers,
- most notably the Ultimaker.
- .
- This package provides a Post-Processing plugin.
+ This package provides a service, which allows backups of configurations and settings to Ultimaker servers.

 Package: cura-plugin-sliceinfo
 Architecture: all
@ -142,7 +147,7 @@ Provides:
 ${python3:Provides},
 XB-Python3-Version:
 ${python3:Versions},
-Description:  GUI G-code generator for 3D printers - sliceinfo plugin
+Description: Slicing application for 3-D printers - SliceInfoPlugin plugin
 Cura converts digital 3D models into printing instructions (G-code)
 for your 3D printer. It cuts the model into horizontal slices (layers),
 generates toolpaths to fill them and calculates the amount of material
@ -153,125 +158,3 @@ Description:  GUI G-code generator for 3D printers - sliceinfo plugin
 most notably the Ultimaker.
 .
 This package provides a tool, which sends statistics to Ultimaker.
-
-Package: cura-plugin-ufpwriter
-Architecture: all
-Depends:
- cura-plugin-api-3,
- python3-charon,
- ${shlibs:Depends},
- ${misc:Depends},
- ${python3:Depends},
-Provides:
- ${python3:Provides},
-Replaces:
- cura,
-XB-Python3-Version:
- ${python3:Versions},
-Description: GUI G-code generator for 3D printers - UFPWriter plugin
- Cura converts digital 3D models into printing instructions (G-code)
- for your 3D printer. It cuts the model into horizontal slices (layers),
- generates toolpaths to fill them and calculates the amount of material
- to be extruded.
- .
- Cura is easy to use for novices and provide over 200 settings to adjust
- for the expert.  It can output G-Code for several series of 3D printers,
- most notably the Ultimaker.
- .
- This package provides a UFPWriter plugin.
-
-Package: cura-plugin-ultimakermachineactions
-Architecture: all
-Depends:
- cura-plugin-api-3,
- ${shlibs:Depends},
- ${misc:Depends},
- ${python3:Depends},
-Provides:
- ${python3:Provides},
-XB-Python3-Version:
- ${python3:Versions},
-Description: GUI G-code generator for 3D printers - ultimakermachineactions plugin
- Cura converts digital 3D models into printing instructions (G-code)
- for your 3D printer. It cuts the model into horizontal slices (layers),
- generates toolpaths to fill them and calculates the amount of material
- to be extruded.
- .
- Cura is easy to use for novices and provide over 200 settings to adjust
- for the expert.  It can output G-Code for several series of 3D printers,
- most notably the Ultimaker.
- .
- This package provides a functions to run Ultimaker-specific actions.
-
-Package: cura-plugin-um3networkprinting
-Architecture: all
-Depends:
- cura-plugin-api-3,
- ${shlibs:Depends},
- ${misc:Depends},
- ${python3:Depends},
- python3-zeroconf,
-Provides:
- ${python3:Provides},
- cura-extra-plugin-um3networkprinting,
-Conflicts:
- cura-extra-plugin-um3networkprinting,
-Replaces:
- cura-extra-plugin-um3networkprinting,
-XB-Python3-Version:
- ${python3:Versions},
-Description:  GUI G-code generator for 3D printers - um3networkprinting plugin
- Cura converts digital 3D models into printing instructions (G-code)
- for your 3D printer. It cuts the model into horizontal slices (layers),
- generates toolpaths to fill them and calculates the amount of material
- to be extruded.
- .
- Cura is easy to use for novices and provide over 200 settings to adjust
- for the expert.  It can output G-Code for several series of 3D printers,
- most notably the Ultimaker.
- .
- This package adds the possibility to interact with Ultimaker3 printers over the network.
-
-Package: cura-plugin-usbprinting
-Architecture: all
-Depends:
- cura-plugin-api-3,
- ${shlibs:Depends},
- ${misc:Depends},
- ${python3:Depends},
-XB-Python3-Version:
- ${python3:Versions},
-Description: GUI G-code generator for 3D printers - usbprinting plugin
- Cura converts digital 3D models into printing instructions (G-code)
- for your 3D printer. It cuts the model into horizontal slices (layers),
- generates toolpaths to fill them and calculates the amount of material
- to be extruded.
- .
- Cura is easy to use for novices and provide over 200 settings to adjust
- for the expert.  It can output G-Code for several series of 3D printers,
- most notably the Ultimaker.
- .
- This package adds additional functions to be able to print via USB.
-
-Package: cura-plugin-x3dreader
-Architecture: all
-Depends:
- cura-plugin-api-3,
- ${shlibs:Depends},
- ${misc:Depends},
- ${python3:Depends},
-Provides:
- ${python3:Provides},
-XB-Python3-Version:
- ${python3:Versions},
-Description: GUI G-code generator for 3D printers - x3dreader plugin
- Cura converts digital 3D models into printing instructions (G-code)
- for your 3D printer. It cuts the model into horizontal slices (layers),
- generates toolpaths to fill them and calculates the amount of material
- to be extruded.
- .
- Cura is easy to use for novices and provide over 200 settings to adjust
- for the expert.  It can output G-Code for several series of 3D printers,
- most notably the Ultimaker.
- .
- This package is used to open X3D files in Cura.
--- a/Cura/cura-plugin-curadrive.install
+++ b/Cura/cura-plugin-curadrive.install
@ -0,0 +1 @@
+/usr/lib/cura/plugins/CuraDrive/
--- a/Cura/cura-plugin-gcodereader.install
+++ b/Cura/cura-plugin-gcodereader.install
@ -1 +0,0 @@
-/usr/lib/cura/plugins/GCodeReader
--- a/Cura/cura-plugin-postprocessing.install
+++ b/Cura/cura-plugin-postprocessing.install
@ -1 +0,0 @@
-usr/lib/cura/plugins/PostProcessingPlugin/
--- a/Cura/cura-plugin-ufpwriter.install
+++ b/Cura/cura-plugin-ufpwriter.install
@ -1 +0,0 @@
-usr/lib/cura/plugins/UFPWriter/
--- a/Cura/cura-plugin-ultimakermachineactions.install
+++ b/Cura/cura-plugin-ultimakermachineactions.install
@ -1 +0,0 @@
-/usr/lib/cura/plugins/UltimakerMachineActions
--- a/Cura/cura-plugin-um3networkprinting.install
+++ b/Cura/cura-plugin-um3networkprinting.install
@ -1 +0,0 @@
-usr/lib/cura/plugins/UM3NetworkPrinting
--- a/Cura/cura-plugin-usbprinting.install
+++ b/Cura/cura-plugin-usbprinting.install
@ -1 +0,0 @@
-usr/lib/cura/plugins/USBPrinting
--- a/Cura/cura-plugin-x3dreader.install
+++ b/Cura/cura-plugin-x3dreader.install
@ -1 +0,0 @@
-/usr/lib/cura/plugins/X3DReader
--- a/Cura/cura.envhack
+++ b/Cura/cura.envhack
@ -0,0 +1,10 @@
+#!/bin/sh
+
+export XDG_CONFIG_DIRS=/etc/xdg
+unset XDG_SESSION_DESKTOP
+unset XDG_CURRENT_DESKTOP
+unset KDE_FULL_SESSION
+unset KDE_SESSION_UID
+unset KDE_SESSION_VERSION
+
+cura.real "$@"
--- a/Cura/cura.install
+++ b/Cura/cura.install
@ -1,47 +1,61 @@
-usr/bin/cura
-usr/lib/cura/plugins/3MFReader
-usr/lib/cura/plugins/3MFWriter
-usr/lib/cura/plugins/ChangeLogPlugin
-usr/lib/cura/plugins/CuraEngineBackend
-usr/lib/cura/plugins/CuraProfileReader
-usr/lib/cura/plugins/CuraProfileWriter
-usr/lib/cura/plugins/FirmwareUpdateChecker
-usr/lib/cura/plugins/FirmwareUpdater
-usr/lib/cura/plugins/GCodeGzReader
-usr/lib/cura/plugins/GCodeGzWriter
-usr/lib/cura/plugins/GCodeProfileReader
-usr/lib/cura/plugins/GCodeWriter
-usr/lib/cura/plugins/ImageReader
-usr/lib/cura/plugins/LegacyProfileReader
-usr/lib/cura/plugins/MachineSettingsAction
-usr/lib/cura/plugins/ModelChecker
-usr/lib/cura/plugins/MonitorStage
-usr/lib/cura/plugins/PerObjectSettingsTool
-usr/lib/cura/plugins/PrepareStage
-usr/lib/cura/plugins/RemovableDriveOutputDevice
-usr/lib/cura/plugins/SimulationView
-usr/lib/cura/plugins/SolidView
-usr/lib/cura/plugins/SupportEraser
-usr/lib/cura/plugins/Toolbox
-usr/lib/cura/plugins/UFPWriter
-usr/lib/cura/plugins/UserAgreement
-usr/lib/cura/plugins/VersionUpgrade
-usr/lib/cura/plugins/XmlMaterialProfile
-usr/lib/cura/plugins/XRayView
-usr/lib/python3/dist-packages/cura
-usr/share/applications/
-usr/share/cura/resources/bundled_packages/cura.json
-usr/share/cura/resources/definitions
-usr/share/cura/resources/extruders
-usr/share/cura/resources/i18n
-usr/share/cura/resources/images
-usr/share/cura/resources/meshes
-usr/share/cura/resources/qml
-usr/share/cura/resources/quality
-usr/share/cura/resources/setting_visibility
-usr/share/cura/resources/shaders
-usr/share/cura/resources/themes
-usr/share/cura/resources/variants
-usr/share/icons/hicolor/128x128/apps
-usr/share/metainfo/
-usr/share/mime/packages/
+/usr/bin/
+/usr/lib/cura/plugins/3MFReader
+/usr/lib/cura/plugins/3MFWriter
+/usr/lib/cura/plugins/AMFReader
+/usr/lib/cura/plugins/CuraEngineBackend
+/usr/lib/cura/plugins/CuraProfileReader
+/usr/lib/cura/plugins/CuraProfileWriter
+/usr/lib/cura/plugins/DigitalLibrary
+/usr/lib/cura/plugins/FirmwareUpdateChecker
+/usr/lib/cura/plugins/FirmwareUpdater
+/usr/lib/cura/plugins/GCodeReader
+/usr/lib/cura/plugins/GCodeGzReader
+/usr/lib/cura/plugins/GCodeGzWriter
+/usr/lib/cura/plugins/GCodeProfileReader
+/usr/lib/cura/plugins/GCodeWriter
+/usr/lib/cura/plugins/ImageReader
+/usr/lib/cura/plugins/LegacyProfileReader
+/usr/lib/cura/plugins/MachineSettingsAction
+/usr/lib/cura/plugins/Marketplace
+/usr/lib/cura/plugins/ModelChecker
+/usr/lib/cura/plugins/MonitorStage
+/usr/lib/cura/plugins/PerObjectSettingsTool
+/usr/lib/cura/plugins/PostProcessingPlugin
+/usr/lib/cura/plugins/PrepareStage
+/usr/lib/cura/plugins/PreviewStage
+/usr/lib/cura/plugins/RemovableDriveOutputDevice
+/usr/lib/cura/plugins/SentryLogger
+/usr/lib/cura/plugins/SimulationView
+/usr/lib/cura/plugins/SolidView
+/usr/lib/cura/plugins/SupportEraser
+/usr/lib/cura/plugins/TrimeshReader
+/usr/lib/cura/plugins/UltimakerMachineActions
+/usr/lib/cura/plugins/UFPReader
+/usr/lib/cura/plugins/UFPWriter
+/usr/lib/cura/plugins/UM3NetworkPrinting
+/usr/lib/cura/plugins/USBPrinting
+/usr/lib/cura/plugins/VersionUpgrade
+/usr/lib/cura/plugins/X3DReader
+/usr/lib/cura/plugins/XmlMaterialProfile
+/usr/lib/cura/plugins/XRayView
+/usr/lib/python3/dist-packages/cura
+/usr/share/applications/
+/usr/share/cura/resources/bundled_packages/cura.json
+/usr/share/cura/resources/definitions
+/usr/share/cura/resources/extruders
+/usr/share/cura/resources/i18n
+/usr/share/cura/resources/images
+/usr/share/cura/resources/intent
+/usr/share/cura/resources/meshes
+/usr/share/cura/resources/qml
+/usr/share/cura/resources/quality
+/usr/share/cura/resources/setting_visibility
+/usr/share/cura/resources/shaders
+/usr/share/cura/resources/texts
+/usr/share/cura/resources/themes
+/usr/share/cura/resources/variants
+/usr/share/cura/resources/public_key.pem
+/usr/share/cura/resources/README_resources.txt
+/usr/share/icons/hicolor/128x128/apps
+/usr/share/metainfo/
+/usr/share/mime/packages/
--- a/Cura/rules
+++ b/Cura/rules
@ -1,7 +1,8 @@
 #!/usr/bin/make -f
 # See debhelper(7) (uncomment to enable)
 # output every command that modifies files on the build system.
-export DH_VERBOSE = 1
+#export DH_VERBOSE = 1
+
 # Suppress __pycache__ pollution
 export PYTHONDONTWRITEBYTECODE = 1

@ -12,20 +13,25 @@ DEB_PACKAGE_VERSION ?= $(shell dpkg-parsechangelog -SVersion | cut -f2 -d":" | c

 override_dh_clean:
 	rm -fv debian/cura.sharedmimeinfo
-	patch --dry-run -Rf -i debian/patches/02-exclude-fonts.patch && patch -R -i debian/patches/02-exclude-fonts.patch || true
+	# patch --dry-run -Rf -i debian/patches/02-exclude-fonts.patch && patch -R -i debian/patches/02-exclude-fonts.patch || true
 	dh_clean -O--buildsystem=cmake -O--parallel

 override_dh_install:
 	dh_install --fail-missing

 override_dh_auto_configure:
-	patch -f -i debian/patches/02-exclude-fonts.patch
+	# patch -f -i debian/patches/02-exclude-fonts.patch
 	dh_auto_configure -- \
 	                  -DCMAKE_LIBRARY_PATH=$(DEB_HOST_MULTIARCH) \
 	                  -DURANIUM_SCRIPTS_DIR=/usr/share/uranium/scripts/ \
 	                  -DGETTEXT_MSGINIT_EXECUTABLE=/usr/bin/msginit \
-	                  -DCURA_VERSION="$(DEB_PACKAGE_VERSION)-PPA" \
-			  -DCURA_SDK_VERSION=5.0.0
+	                  -DCURA_VERSION="$(DEB_PACKAGE_VERSION)-PPA"
+
+override_dh_auto_install:
+	dh_auto_install
+	# Hacking Cura with some environment hacks for KDE
+	mv debian/tmp/usr/bin/cura debian/tmp/usr/bin/cura.real
+	cp -fv debian/cura.envhack debian/tmp/usr/bin/cura

 override_dh_installmime:
 	cp -fv cura.sharedmimeinfo debian/cura.sharedmimeinfo
--- a/CuraEngine/README.Debian
+++ b/CuraEngine/README.Debian
@ -1,6 +0,0 @@
-uranium for Debian
------------------
-
-<possible notes regarding this package - if none, delete this file>
-
- -- Thomas-Karl Pietrowski <thopiekar@unknown>  Thu, 30 Jul 2015 13:51:51 +0200
--- a/CuraEngine/README.source
+++ b/CuraEngine/README.source
@ -1,10 +1,7 @@
-uranium for Debian
+Uranium for Debian
 ------------------

 <this file describes information about the source package, see Debian policy
 manual section 4.14. You WILL either need to modify or delete this file>

-
-
- -- Thomas-Karl Pietrowski <thopiekar@unknown>  Thu, 30 Jul 2015 13:51:51 +0200
-
+ -- Thomas-Karl Pietrowski <thopiekar@gmail.com>  Thu, 30 Jul 2015 13:51:51 +0200
--- a/CuraEngine/changelog
+++ b/CuraEngine/changelog
@ -1,5 +1,5 @@
-cura-engine (1:3.6) unstable; urgency=medium
+cura-engine (1:4.14) unstable; urgency=medium

  * Initial release

- -- Thomas Karl Pietrowski <thopiekar@googlemail.com>  Thu, 30 Jul 2015 13:51:51 +0200
+ -- Thomas Karl Pietrowski <thopiekar@gmail.com>  Thu, 30 Jul 2015 13:51:51 +0200
--- a/CuraEngine/control
+++ b/CuraEngine/control
@ -1,9 +1,11 @@
 Source: cura-engine
 Section: utils
 Priority: optional
-Maintainer: Thomas Karl Pietrowski <thopiekar@googlemail.com>
+Maintainer: Thomas Karl Pietrowski <thopiekar@gmail.com>
 Build-Depends:
 debhelper (>= 9), cmake,
+ libpthread-stubs0-dev,
+ libboost-all-dev,
 python3-all-dev,
 libarcus-dev,
 # Protobuf (>= 3.5)
@ -11,6 +13,9 @@ Build-Depends:
 stb-dev,
 # Tests
 libcppunit-dev,
+# # Optional installation of gmock
+ libgmock-dev | libgtest-dev,
+ libgtest-dev,
 Standards-Version: 3.9.6
 Homepage: https://github.com/Ultimaker/CuraEngine
 Vcs-Git: https://github.com/Ultimaker/CuraEngine.git
@ -20,9 +25,9 @@ X-Python3-Version: >= 3.4
 Package: cura-engine
 Architecture: any
 Depends: ${shlibs:Depends}, ${python3:Depends}, ${misc:Depends}
-Description: commandline slicer program for 3-D printers
- 3-D printers need a toolpath for printing, while what is usually distributed
+Description: Slicing application for 3-D printers (CLI)
+ Most 3-D printers need a toolpath for printing, while what is usually distributed
 is a 3-D model.  A slicer programs converts a model to a toolpath, with user
 defined settings for options such as infill density and printing speed.
 .
- This slicer is the commandline backend of Cura.
+ This slicer is used by Cura to create these toolpaths.
--- a/CuraEngine/copyright
+++ b/CuraEngine/copyright
@ -7,7 +7,7 @@ Copyright: 2013 David Braam
 License: AGPL-3

 Files: debian/*
-Copyright: 2015 Thomas-Karl Pietrowski <thopiekar@unknown>
+Copyright: 2015 Thomas Karl Pietrowski <thopiekar@gmail.com>
 License: GPL-2+
 This package is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
--- a/CuraEngine/rules
+++ b/CuraEngine/rules
@ -1,20 +1,22 @@
 #!/usr/bin/make -f

-DEB_ARCH=$(shell dpkg --print-architecture)
-
 # output every command that modifies files on the build system.
 #export DH_VERBOSE = 1

+DEB_PACKAGE_VERSION ?= $(shell dpkg-parsechangelog -SVersion | cut -f2 -d":" | cut -f1 -d"~")
+
+
 %:
 	dh $@ --buildsystem=cmake --parallel

 override_dh_auto_configure:
 	dh_auto_configure -- \
 	    -DCMAKE_LIBRARY_PATH=$(DEB_HOST_MULTIARCH) \
-	    -DBUILD_TESTS:BOOL=ON
+	    -DBUILD_TESTS:BOOL=OFF \
+	    -DCURA_ENGINE_VERSION=${DEB_PACKAGE_VERSION}

-override_dh_install:
-	dh_install --fail-missing
+override_dh_missing:
+	dh_missing --fail-missing

 override_dh_auto_test:
-		dh_auto_test || true
+	dh_auto_test || true
--- a/README.md
+++ b/README.md
@ -5,7 +5,7 @@
 * https://launchpad.net/~thopiekar/+archive/ubuntu/cura-master

 ## Any problems with your installation?
-Take a look at [Troubleshooting](Troubleshooting.md) first. If you are sure that your problems are 100%ly related to the packages and not to Cura itself, report your problems here. When reporting problems at [Cura](https://github.com/Ultimaker/Cura), do not forget to mention me in your issue report by `@thopiekar`, so I get notified.
+Take a look at [Troubleshooting](https://thopiekar.eu/cura/ppa/troubleshooting/) first. If you are sure that your problems are 100%ly related to the packages and not to Cura itself, report your problems here. When reporting problems at [Cura](https://github.com/Ultimaker/Cura), do not forget to mention me in your issue report by `@thopiekar`, so I get notified.
 There is also a issue report for different problems at [#1094](https://github.com/Ultimaker/Cura/issues/1094). Users already exchange their workarounds there and also help each other.

 ## Discussion:
@ -32,5 +32,7 @@ There is also a issue report for different problems at [#1094](https://github.co
 * https://code.launchpad.net/~thopiekar/+recipe/libcharon-master-daily
 * https://code.launchpad.net/~thopiekar/+recipe/libsavitar-master-daily
 * https://code.launchpad.net/~thopiekar/+recipe/uranium-master-daily
+* https://code.launchpad.net/~thopiekar/+recipe/pynest2d-master-daily
 * https://code.launchpad.net/~thopiekar/+recipe/protobuf-daily (3rd-party)
 * https://code.launchpad.net/~thopiekar/+recipe/stb-daily (3rd-party)
+* https://code.launchpad.net/~thopiekar/+recipe/libnest2d-master-daily (3rd-party)
--- a/Troubleshooting.md
+++ b/Troubleshooting.md
@ -1,35 +0,0 @@
-# Troubleshooting
-
-## Removing packages from the PPA:
-
-### Method 1: Using ppa-purge
-In case of our stable PPA:
-```{r, engine='bash'}
-sudo apt update
-sudo apt install ppa-purge
-sudo ppa-purge ppa:thopiekar/cura
-```
-In case of our master PPA:
-```{r, engine='bash'}
-sudo apt update
-sudo apt install ppa-purge
-sudo ppa-purge ppa:thopiekar/cura-master
-```
-### Method 2: Using synaptic
-Using Synaptic you can easily see where your installed packages are from.
-In our case you can easily select the PPA and remove all packages from there.
-For more info on using Synaptic search the web for manuals. There are enough around...
-![ultimaker_synaptic](https://cloud.githubusercontent.com/assets/1847437/21223747/2cfb8984-c2c9-11e6-9b20-fe240d2eef15.png)
-
-### Method 3: Apt-Pinning
-An easy method for advanced users is to change the PPAs priority using APT pinning.
-While choosing a low "Pin-Priority" you can even tell APT to avoid a repository, if needed.
-Using a low here will tell APT to downgrade to the Ubuntu packages whenever possible.
-
-## Can't find feature ... that's usually included in Cura
-You probably need to install the specific plugin, you can also add all the plugins by installing `cura-extra-plugins-all`.
-You can get a list of available plugins (and all packages) using the Synaptic Package Manager, by viewing 
-the `LP-PPA-thopiekar-cura/...`  origin. 
-
-## Ultimaker 3 Connect button is missing
-You probably need to add the plugin for UM3 network printing. You can install `cura-extra-plugin-um3networkprinting` or all the plugins by installing `cura-extra-plugins-all`.
--- a/Uranium/changelog
+++ b/Uranium/changelog
@ -1,5 +1,5 @@
-uranium (1:3.6) unstable; urgency=low
+uranium (1:4.14) unstable; urgency=low

  * Initial release

- -- Thomas Karl Pietrowski <thopiekar@googlemail.com>  Thu, 30 Jul 2015 13:51:51 +0200
+ -- Thomas Karl Pietrowski <thopiekar@gmail.com>  Thu, 30 Jul 2015 13:51:51 +0200
--- a/Uranium/control
+++ b/Uranium/control
@ -1,11 +1,13 @@
 Source: uranium
 Section: python
 Priority: optional
-Maintainer: Thomas Karl Pietrowski <thopiekar@googlemail.com>
+Maintainer: Thomas Karl Pietrowski <thopiekar@gmail.com>
 Build-Depends:
 debhelper (>= 9),
+ dh-python,
 cmake,
 python3-all-dev,
+ python3-all-dbg,
 # PyQt
 python3-pyqt5,
 python3-numpy,
@ -15,7 +17,10 @@ Build-Depends:
 gettext,
 # Test suite
 python3-pytest,
- pylint3,
+ pylint3 | pylint,
+ python3-arcus,
+ python3-cryptography,
+ python3-pyqt5.qtquick,
 Standards-Version: 3.9.6
 Homepage: https://github.com/Ultimaker/Uranium
 X-Python3-Version: >= 3.4
@ -35,6 +40,7 @@ Depends:
 python3-numpy,
 python3-scipy,
 python3-shapely,
+ python3-pyclipper,
 # PyQt5
 python3-pyqt5,
 python3-pyqt5.qtopengl,
--- a/Uranium/rules
+++ b/Uranium/rules
@ -5,27 +5,54 @@ export DH_VERBOSE = 1
 # Suppress __pycache__ pollution
 export PYTHONDONTWRITEBYTECODE = 1

+CMAKE_COMMON_OPTIONS := -DCMAKE_LIBRARY_PATH=$(DEB_HOST_MULTIARCH)
+
 %:
 	dh $@ --with python3 --buildsystem=cmake --parallel

 override_dh_auto_configure:
 	for PYX in $(shell py3versions -rv) ; do \
-	    dh_auto_configure --builddirectory=build-$${PYX}; \
+	    mkdir -p build-$${PYX}; \
+	    dh_auto_configure --builddirectory=build-$${PYX} -- \
+	                      $(CMAKE_COMMON_OPTIONS) \
+	                      -DCMAKE_BUILD_TYPE:STRING="RelWithDebInfo" \
+	                      -DCMAKE_INSTALL_LIBDIR=/usr/lib/$(DEB_HOST_MULTIARCH) \
+	                      -DPYTHON_LIBRARY:FILEPATH=/usr/lib/$(DEB_HOST_MULTIARCH)/libpython$${PYX}m.so \
+	                      -DPYTHON_SITE_PACKAGES_DIR:FILEPATH=/usr/lib/python$${PYX}/dist-packages \
+	                      -DPYTHON_INCLUDE_DIR:FILEPATH=/usr/include/python$${PYX}m \
+	                      -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/python$${PYX} ; \
+	done
+	
+	# DEBUG
+	for PYX in $(shell py3versions -rv) ; do \
+	    mkdir -p build-$${PYX}-dbg; \
+	    dh_auto_configure --builddirectory=build-$${PYX}-dbg -- \
+	                      $(CMAKE_COMMON_OPTIONS) \
+	                      -DCMAKE_BUILD_TYPE:STRING="Debug" \
+	                      -DCMAKE_INSTALL_LIBDIR=/usr/lib/debug/lib/$(DEB_HOST_MULTIARCH) \
+	                      -DPYTHON_LIBRARY:FILEPATH=/usr/lib/$(DEB_HOST_MULTIARCH)/libpython$${PYX}m.so \
+	                      -DPYTHON_DEBUG_LIBRARY:FILEPATH=/usr/lib/$(DEB_HOST_MULTIARCH)/libpython$${PYX}dm.so \
+	                      -DPYTHON_SITE_PACKAGES_DIR:FILEPATH=/usr/lib/python$${PYX}/dist-packages \
+	                      -DPYTHON_INCLUDE_DIR:FILEPATH=/usr/include/python$${PYX}dm \
+	                      -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/python$${PYX}-dbg ; \
 	done

 override_dh_auto_build:
 	for PYX in $(shell py3versions -rv) ; do \
 	    dh_auto_build --builddirectory=build-$${PYX}; \
+	    dh_auto_build --builddirectory=build-$${PYX}-dbg; \
 	done

 override_dh_auto_install:
 	for PYX in $(shell py3versions -rv) ; do \
-	    dh_auto_install --builddirectory=build-$${PYX} --destdir=debian/tmp ; \
+	    dh_auto_install --builddirectory=build-$${PYX} --destdir=debian/tmp; \
+	    dh_auto_install --builddirectory=build-$${PYX}-dbg --destdir=debian/tmp-dbg; \
 	done

 override_dh_auto_test:
 	for PYX in $(shell py3versions -rv) ; do \
-	    dh_auto_test --builddirectory=build-$${PYX} || true ; \
+	    dh_auto_test --builddirectory=build-$${PYX} || true; \
+	    dh_auto_test --builddirectory=build-$${PYX}-dbg || true; \
 	done

 override_dh_install:
--- a/_3rd-party/libnest2d/README.Debian
+++ b/_3rd-party/libnest2d/README.Debian
@ -0,0 +1,6 @@
+libnest2d for Debian
+-------------------
+
+<possible notes regarding this package - if none, delete this file>
+
+ -- Thomas Karl Pietrowski <thopiekar@unknown>  Sat, 05 Dec 2020 12:41:14 +0100
--- a/_3rd-party/libnest2d/README.source
+++ b/_3rd-party/libnest2d/README.source
@ -0,0 +1,10 @@
+libnest2d for Debian
+-------------------
+
+<this file describes information about the source package, see Debian policy
+manual section 4.14. You WILL either need to modify or delete this file>
+
+
+
+ -- Thomas Karl Pietrowski <thopiekar@unknown>  Sat, 05 Dec 2020 12:41:14 +0100
+
--- a/_3rd-party/libnest2d/changelog
+++ b/_3rd-party/libnest2d/changelog
@ -0,0 +1,5 @@
+libnest2d (0.5-2) unstable; urgency=medium
+
+  * Initial release
+
+ -- Thomas Karl Pietrowski <thopiekar@gmail.com>  Sat, 05 Dec 2020 12:41:14 +0100
--- a/_3rd-party/libnest2d/compat
+++ b/_3rd-party/libnest2d/compat
@ -0,0 +1 @@
+10
--- a/_3rd-party/libnest2d/control
+++ b/_3rd-party/libnest2d/control
@ -0,0 +1,35 @@
+Source: libnest2d
+Section: devel
+Priority: optional
+Maintainer: Thomas Karl Pietrowski <thopiekar@gmail.com>
+Build-Depends:
+ debhelper (>= 10),
+ cmake,
+# libclipper-dev,
+ libboost-dev,
+ libpolyclipping-dev,
+ libnlopt-cxx-dev,
+Standards-Version: 4.1.2
+Homepage: https://github.com/prusa3d/PrusaSlicer
+Vcs-Browser: https://github.com/tamasmeszaros/libnest2d
+Vcs-Git: https://github.com/tamasmeszaros/libnest2d.git
+
+Package: libnest2d
+Architecture: any
+Depends:
+ ${shlibs:Depends},
+ ${misc:Depends},
+Description: 2D irregular bin packaging and nesting C++ header-only library
+ 2D irregular bin packaging and nesting C++ header-only library
+ .
+ Library
+
+Package: libnest2d-dev
+Architecture: all
+Depends:
+ libnest2d,
+ ${misc:Depends},
+Description: 2D irregular bin packaging and nesting C++ header-only library
+ 2D irregular bin packaging and nesting C++ header-only library
+ .
+ Development files
--- a/_3rd-party/libnest2d/copyright
+++ b/_3rd-party/libnest2d/copyright
@ -0,0 +1,43 @@
+Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: libnest2d
+Upstream-Contact: <preferred name and address to reach the upstream project>
+Source: <url://example.com>
+
+Files: *
+Copyright: <years> <put author's name and email here>
+           <years> <likewise for another author>
+License: <special license>
+ <Put the license of the package here indented by 1 space>
+ <This follows the format of Description: lines in control file>
+ .
+ <Including paragraphs>
+
+# If you want to use GPL v2 or later for the /debian/* files use
+# the following clauses, or change it to suit. Delete these two lines
+Files: debian/*
+Copyright: 2020 Thomas Karl Pietrowski <thopiekar@unknown>
+License: GPL-2+
+ This package is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+ .
+ This package is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+ .
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <https://www.gnu.org/licenses/>
+ .
+ On Debian systems, the complete text of the GNU General
+ Public License version 2 can be found in "/usr/share/common-licenses/GPL-2".
+
+# Please also look if there are files or directories which have a
+# different copyright/license attached and list them here.
+# Please avoid picking licenses with terms that are more restrictive than the
+# packaged work, as it may make Debian's contributions unacceptable upstream.
+#
+# If you need, there are some extra license texts available in two places:
+#   /usr/share/debhelper/dh_make/licenses/
+#   /usr/share/common-licenses/
--- a/_3rd-party/libnest2d/libnest2d-dev.install
+++ b/_3rd-party/libnest2d/libnest2d-dev.install
@ -0,0 +1,3 @@
+/usr/include/
+/usr/lib/*/*.so
+/usr/lib/cmake/
--- a/_3rd-party/libnest2d/libnest2d-docs.docs
+++ b/_3rd-party/libnest2d/libnest2d-docs.docs
@ -0,0 +1,2 @@
+README.source
+README.Debian
--- a/_3rd-party/libnest2d/libnest2d.install
+++ b/_3rd-party/libnest2d/libnest2d.install
@ -0,0 +1 @@
+/usr/lib/*/*.so.*
--- a/_3rd-party/libnest2d/rules
+++ b/_3rd-party/libnest2d/rules
@ -0,0 +1,16 @@
+#!/usr/bin/make -f
+# See debhelper(7) (uncomment to enable)
+# output every command that modifies files on the build system.
+export DH_VERBOSE = 1
+
+
+%:
+	dh $@ --buildsystem=cmake
+
+override_dh_auto_configure:
+	dh_auto_configure -- \
+	    -DBUILD_SHARED_LIBS:BOOL=ON \
+	    -DLIBNEST2D_HEADER_ONLY:BOOL=OFF
+
+override_dh_missing:
+	dh_missing --fail-missing
--- a/_3rd-party/libnest2d/source/format
+++ b/_3rd-party/libnest2d/source/format
@ -0,0 +1 @@
+3.0 (native)
--- a/_3rd-party/numpy-stl/control
+++ b/_3rd-party/numpy-stl/control
@ -1,7 +1,7 @@
 Source: numpy-stl
 Section: python
 Priority: optional
-Maintainer: Thomas Karl Pietrowski <thopiekar@googlemail.com>
+Maintainer: Thomas Karl Pietrowski <thopiekar@gmail.com>
 Build-Depends: debhelper (>= 9), dh-python,
 # Python development files
 python-all-dev, python3-all-dev,
--- a/_3rd-party/numpy-stl/rules
+++ b/_3rd-party/numpy-stl/rules
@ -11,26 +11,6 @@ export PYTEST_RUNNER=false
 	      --buildsystem=pybuild \
 	      --parallel

-#### CONFIGURE ####
-#override_dh_auto_configure:
-#	@echo "Nothing to configure over here..."
-
-#### BUILD ####
-#override_dh_auto_build:
-#	# RELEASE
-#	for PYX in $(shell pyversions -rv) $(shell py3versions -rv) ; do \
-#	    python$${PYX} setup.py build ; \
-#	    python$${PYX} setup.py install --root=debian/numpy-stl ; \
-#	    python$${PYX} setup.py clean ; \
-#	done
-#	
-#	# DEBUG
-#	for PYX in $(shell pyversions -rv) $(shell py3versions -rv) ; do \
-#	    python$${PYX}-dbg setup.py build ; \
-#	    python$${PYX}-dbg setup.py install --root=debian/numpy-stl ; \
-#	    python$${PYX}-dbg setup.py clean ; \
-#	done
-
 override_dh_auto_test:
 	@echo "Nothing to test over here..."

--- a/_3rd-party/protobuf/changelog
+++ b/_3rd-party/protobuf/changelog
@ -2,5 +2,5 @@ protobuf (3.6.0-0curappa0) experimental; urgency=medium

  * New upstream release.

- -- Thomas-Karl Pietrowski <thopiekar@googlemail.com>  Fri, 31 Jul 2015 13:55:53 +0200
+ -- Thomas-Karl Pietrowski <thopiekar@gmail.com>  Fri, 31 Jul 2015 13:55:53 +0200

--- a/_3rd-party/stb/control
+++ b/_3rd-party/stb/control
@ -2,15 +2,18 @@ Source: stb
 Section: devel
 Priority: optional
 Maintainer: Thomas Karl Pietrowski <thopiekar@gmail.com>
-Build-Depends: debhelper (>= 10)
+Build-Depends:
+ debhelper (>= 10),
 Standards-Version: 4.1.2
-Homepage: <insert the upstream URL, if relevant>
-#Vcs-Git: https://anonscm.debian.org/git/collab-maint/stb.git
-#Vcs-Browser: https://anonscm.debian.org/cgit/collab-maint/stb.git
+Homepage: https://github.com/nothings/stb
+Vcs-Browser: https://github.com/nothings/stb
+Vcs-Git: https://github.com/nothings/stb.git

 Package: stb
 Architecture: all
-Depends: ${shlibs:Depends}, ${misc:Depends}
+Depends:
+ ${shlibs:Depends},
+ ${misc:Depends},
 Provides: stb-dev
 Description: Sean's Tool Box - single-file public domain (or MIT licensed) libraries for C/C++
 This is a single header file with a bunch of useful utilities for getting stuff done in C/C++.
--- a/_3rd-party/stb/files
+++ b/_3rd-party/stb/files
@ -1 +0,0 @@
-stb_0.0.1-1_source.buildinfo unknown optional
--- a/_3rd-party/stb/rules
+++ b/_3rd-party/stb/rules
@ -17,9 +17,3 @@
 %:
 	dh $@

-
-# dh_make generated override targets
-# This is example for Cmake (See https://bugs.debian.org/641051 )
-#override_dh_auto_configure:
-#	dh_auto_configure -- #	-DCMAKE_LIBRARY_PATH=$(DEB_HOST_MULTIARCH)
-
--- a/_3rd-party/trimesh/README.Debian
+++ b/_3rd-party/trimesh/README.Debian
@ -0,0 +1,6 @@
+numpy-stl for Debian
+-------------------
+
+<possible notes regarding this package - if none, delete this file>
+
+ -- Thomas Karl Pietrowski <thopiekar@unknown>  Sat, 29 Apr 2017 11:45:20 +0200
--- a/_3rd-party/trimesh/README.source
+++ b/_3rd-party/trimesh/README.source
@ -0,0 +1,10 @@
+numpy-stl for Debian
+-------------------
+
+<this file describes information about the source package, see Debian policy
+manual section 4.14. You WILL either need to modify or delete this file>
+
+
+
+ -- Thomas Karl Pietrowski <thopiekar@unknown>  Sat, 29 Apr 2017 11:45:20 +0200
+
--- a/_3rd-party/trimesh/changelog
+++ b/_3rd-party/trimesh/changelog
@ -0,0 +1,5 @@
+trimesh (3.2.22) unstable; urgency=medium
+
+  * Initial release
+
+ -- Thomas Karl Pietrowski <thopiekar@unknown>  Sat, 05 Oct 2019 21:23:46 +0200
--- a/_3rd-party/trimesh/compat
+++ b/_3rd-party/trimesh/compat
@ -0,0 +1 @@
+9
--- a/_3rd-party/trimesh/control
+++ b/_3rd-party/trimesh/control
@ -0,0 +1,57 @@
+Source: trimesh
+Section: python
+Priority: optional
+Maintainer: Thomas Karl Pietrowski <thopiekar@gmail.com>
+Build-Depends:
+ debhelper (>= 9), dh-python,
+# Python development files
+ python-all-dev, python3-all-dev,
+# Python setuptools
+ python-setuptools, python3-setuptools,
+# pypandoc
+ python-pypandoc, python3-pypandoc,
+# Numpy
+ python-numpy, python3-numpy,
+# SciPy
+ python-scipy, python3-scipy,
+# networkx
+ python-networkx, python3-networkx,
+# recommonmark
+ python-recommonmark, python3-recommonmark,
+# jupyter
+ python-jupyter-core, python3-jupyter-core,
+# Sphinx
+ python-sphinx, python3-sphinx,
+ sphinx-rtd-theme-common,
+# PyOpenSSL
+ python-openssl, python3-openssl,
+Standards-Version: 3.9.8
+X-Python-Version: >= 2.7
+X-Python3-Version: >= 3.4
+Homepage: <insert the upstream URL, if relevant>
+#Vcs-Git: https://anonscm.debian.org/collab-maint/trimesh.git
+#Vcs-Browser: https://anonscm.debian.org/cgit/collab-maint/trimesh.git
+
+Package: trimesh
+Architecture: all
+Depends:
+ python-trimesh,
+ python3-trimesh,
+Description: <insert up to 60 chars description>
+ <insert long description, indented with spaces>
+
+Package: python-trimesh
+Architecture: all
+Depends:
+ ${misc:Depends},
+ ${python:Depends},
+Description: <insert up to 60 chars description>
+ <insert long description, indented with spaces>
+
+Package: python3-trimesh
+Architecture: all
+Depends:
+ ${misc:Depends},
+ ${python3:Depends},
+Description: <insert up to 60 chars description>
+ <insert long description, indented with spaces>
--- a/_3rd-party/trimesh/copyright
+++ b/_3rd-party/trimesh/copyright
@ -0,0 +1,38 @@
+Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: numpy-stl
+Source: <url://example.com>
+
+Files: *
+Copyright: <years> <put author's name and email here>
+           <years> <likewise for another author>
+License: <special license>
+ <Put the license of the package here indented by 1 space>
+ <This follows the format of Description: lines in control file>
+ .
+ <Including paragraphs>
+
+# If you want to use GPL v2 or later for the /debian/* files use 
+# the following clauses, or change it to suit. Delete these two lines
+Files: debian/*
+Copyright: 2017 Thomas Karl Pietrowski <thopiekar@unknown>
+License: GPL-2+
+ This package is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+ .
+ This package is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+ .
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <https://www.gnu.org/licenses/>
+ .
+ On Debian systems, the complete text of the GNU General
+ Public License version 2 can be found in "/usr/share/common-licenses/GPL-2".
+
+# Please also look if there are files or directories which have a
+# different copyright/license attached and list them here.
+# Please avoid picking licenses with terms that are more restrictive than the
+# packaged work, as it may make Debian's contributions unacceptable upstream.
--- a/_3rd-party/trimesh/python-trimesh.install
+++ b/_3rd-party/trimesh/python-trimesh.install
@ -0,0 +1 @@
+/usr/lib/python2*/dist-packages
--- a/_3rd-party/trimesh/python3-trimesh.install
+++ b/_3rd-party/trimesh/python3-trimesh.install
@ -0,0 +1 @@
+/usr/lib/python3*/dist-packages
--- a/_3rd-party/trimesh/rules
+++ b/_3rd-party/trimesh/rules
@ -0,0 +1,18 @@
+#!/usr/bin/make -f
+# See debhelper(7) (uncomment to enable)
+# output every command that modifies files on the build system.
+export DH_VERBOSE = 1
+
+export PYTEST_RUNNER=false
+
+%:
+	dh $@ --with python2 \
+	      --with python3 \
+	      --buildsystem=pybuild \
+	      --parallel
+
+override_dh_auto_test:
+	@echo "Nothing to test over here..."
+
+override_dh_install:
+	dh_install --fail-missing
--- a/_3rd-party/trimesh/source/format
+++ b/_3rd-party/trimesh/source/format
@ -0,0 +1 @@
+3.0 (native)
--- a/_3rd-party/trimesh/trimesh-docs.docs
+++ b/_3rd-party/trimesh/trimesh-docs.docs
@ -0,0 +1,2 @@
+README.source
+README.Debian
--- a/_3rd-party/trimesh/trimesh.install
+++ b/_3rd-party/trimesh/trimesh.install
--- a/cura-binary-data/changelog
+++ b/cura-binary-data/changelog
@ -1,5 +1,5 @@
-cura-binary-data (3.6) unstable; urgency=low
+cura-binary-data (4.14) unstable; urgency=low

  * Initial release

- -- Thomas Karl Pietrowski <thopiekar@googlemail.com>  Thu, 30 Jul 2015 13:47:20 +0200
+ -- Thomas Karl Pietrowski <thopiekar@gmail.com>  Thu, 30 Jul 2015 13:47:20 +0200
--- a/cura-binary-data/control
+++ b/cura-binary-data/control
@ -1,7 +1,7 @@
 Source: cura-binary-data
 Section: science
 Priority: optional
-Maintainer: Thomas Karl Pietrowski <thopiekar@googlemail.com>
+Maintainer: Thomas Karl Pietrowski <thopiekar@gmail.com>
 Build-Depends:
 debhelper (>= 9), cmake,
 Standards-Version: 3.9.6
@ -21,8 +21,9 @@ Provides:
 cura-firmware,
 cura-resources-materials-generic,
 cura-resources-materials-ultimaker,
-Description:  Cura material files
- These files are needed to work with printers like UM2+ and UM3.
+Description: Slicing application for 3-D printers - firmware files
+ This package provides firmware for different kind of printers.
+ So not only Ultimaker printers, but also printers, which are opensource at least.

 ## Already built in "cura"
 #Package: cura-resources-i18n
@ -35,4 +36,3 @@ Description:  Cura material files
 # cura-resources-materials-ultimaker,
 #Description:  Cura material files
 # These files are needed to work with printers like UM2+ and UM3.
-
--- a/cura-binary-data/rules
+++ b/cura-binary-data/rules
@ -12,8 +12,8 @@ override_dh_auto_install:
 	dh_auto_install --destdir=debian/tmp

 # https://github.com/Ultimaker/cura-binary-data/pull/4
-#override_dh_install:
-#	dh_install --fail-missing
+#override_dh_missing:
+#	dh_missing --fail-missing

 override_dh_auto_test:
-		dh_auto_test || true
+	dh_auto_test || true
--- a/fdm_materials/changelog
+++ b/fdm_materials/changelog
@ -1,5 +1,5 @@
-fdm-materials (3.6) unstable; urgency=low
+fdm-materials (4.14) unstable; urgency=low

  * Initial release

- -- Thomas Karl Pietrowski <thopiekar@googlemail.com>  Thu, 30 Jul 2015 13:47:20 +0200
+ -- Thomas Karl Pietrowski <thopiekar@gmail.com>  Thu, 30 Jul 2015 13:47:20 +0200
--- a/fdm_materials/control
+++ b/fdm_materials/control
@ -1,7 +1,7 @@
 Source: fdm-materials
 Section: science
 Priority: optional
-Maintainer: Thomas Karl Pietrowski <thopiekar@googlemail.com>
+Maintainer: Thomas Karl Pietrowski <thopiekar@gmail.com>
 Build-Depends:
 debhelper (>= 9), cmake,
 Standards-Version: 3.9.6
@ -28,6 +28,5 @@ Conflicts:
 cura (<< 2.4),
 Replaces:
 fdm-materials,
-Description:  Cura material files
+Description: Slicing application for 3-D printers - material files
 These files are needed to work with printers like UM2+ and UM3.
-
--- a/fdm_materials/rules
+++ b/fdm_materials/rules
@ -8,8 +8,8 @@ DEB_PACKAGE_VERSION ?= $(shell dpkg-parsechangelog -SVersion | cut -f2 -d":" | c
 %:
 	dh $@ --buildsystem=cmake --parallel

-#override_dh_install:
-#	dh_install --fail-missing
-
 override_dh_auto_test:
-		dh_auto_test || true
+	dh_auto_test || true
+
+override_dh_missing:
+	dh_missing --fail-missing
--- a/libArcus/changelog
+++ b/libArcus/changelog
@ -1,5 +1,5 @@
-libarcus (1:3.6) unstable; urgency=low
+libarcus (1:4.14) unstable; urgency=low

  * Initial release

- -- Thomas Karl Pietrowski <thopiekar@googlemail.com>  Thu, 30 Jul 2015 13:47:20 +0200
+ -- Thomas Karl Pietrowski <thopiekar@gmail.com>  Thu, 30 Jul 2015 13:47:20 +0200
--- a/libArcus/control
+++ b/libArcus/control
@ -1,15 +1,16 @@
 Source: libarcus
 Section: devel
 Priority: optional
-Maintainer: Thomas Karl Pietrowski <thopiekar@googlemail.com>
+Maintainer: Thomas Karl Pietrowski <thopiekar@gmail.com>
 Build-Depends:
 # Debhelper and build systems
 debhelper (>= 9),
+ dh-python,
 cmake,
 # Python3
 python3-all-dev, python3-all-dbg,
 # SIP
- python3-sip-dev, python3-sip-dbg,
+ python3-sip-dev,
 # Protobuf >= 3.5
 protobuf-compiler (>= 3.5), libprotobuf-dev (>= 3.5), libprotoc-dev,
 Standards-Version: 3.9.8
--- a/libArcus/rules
+++ b/libArcus/rules
@ -1,13 +1,13 @@
 #!/usr/bin/make -f
 # See debhelper(7) (uncomment to enable)
 # output every command that modifies files on the build system.
-export DH_VERBOSE = 1
+export DH_VERBOSE=1

-CMAKE_COMMON_OPTIONS := -DCMAKE_LIBRARY_PATH=$(DEB_HOST_MULTIARCH) \
-                        -DBUILD_EXAMPLES:BOOL=OFF
+CMAKE_COMMON_OPTIONS:=-DCMAKE_LIBRARY_PATH=$(DEB_HOST_MULTIARCH) \
+                      -DBUILD_EXAMPLES:BOOL=OFF

 %:
-	dh $@ --with python3 --buildsystem=cmake --parallel
+	dh $@ --buildsystem=cmake --with python3 --parallel

 override_dh_auto_clean:
 	rm -rf build-*
@ -18,29 +18,27 @@ override_dh_auto_configure:
 	for PYX in $(shell py3versions -rv) ; do \
 	    mkdir -p build-$${PYX}; \
 	    dh_auto_configure -a \
-                          --builddirectory=build-$${PYX} -- \
+	                      --builddirectory=build-$${PYX} -- \
 	                      $(CMAKE_COMMON_OPTIONS) \
 	                      -DCMAKE_BUILD_TYPE:STRING="RelWithDebInfo" \
-	                      -DCMAKE_INSTALL_LIBDIR=/usr/lib/$(DEB_HOST_MULTIARCH) \
-	                      -DPYTHON_LIBRARY:FILEPATH=/usr/lib/$(DEB_HOST_MULTIARCH)/libpython$${PYX}m.so \
+	                      -DPython_VERSION:STRING="$${PYX}" \
 	                      -DPYTHON_SITE_PACKAGES_DIR:FILEPATH=/usr/lib/python$${PYX}/dist-packages \
-	                      -DPYTHON_INCLUDE_DIR:FILEPATH=/usr/include/python$${PYX}m \
-	                      -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/python$${PYX} ; \
+	                      -DPYTHON_EXECUTABLE:FILEPATH=$$(which python$${PYX}) \
+	                      -DCMAKE_INSTALL_LIBDIR=/usr/lib/$(DEB_HOST_MULTIARCH) ; \
 	done
 	
 	# DEBUG
 	for PYX in $(shell py3versions -rv) ; do \
 	    mkdir -p build-$${PYX}-dbg; \
 	    dh_auto_configure -a \
-                          --builddirectory=build-$${PYX}-dbg -- \
+	                      --builddirectory=build-$${PYX}-dbg -- \
 	                      $(CMAKE_COMMON_OPTIONS) \
 	                      -DCMAKE_BUILD_TYPE:STRING="Debug" \
-	                      -DCMAKE_INSTALL_LIBDIR=/usr/lib/debug/lib/$(DEB_HOST_MULTIARCH) \
-	                      -DPYTHON_LIBRARY:FILEPATH=/usr/lib/$(DEB_HOST_MULTIARCH)/libpython$${PYX}m.so \
-	                      -DPYTHON_DEBUG_LIBRARY:FILEPATH=/usr/lib/$(DEB_HOST_MULTIARCH)/libpython$${PYX}dm.so \
+	                      -DPython_VERSION:STRING="$${PYX}" \
 	                      -DPYTHON_SITE_PACKAGES_DIR:FILEPATH=/usr/lib/python$${PYX}/dist-packages \
-	                      -DPYTHON_INCLUDE_DIR:FILEPATH=/usr/include/python$${PYX}dm \
-	                      -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/python$${PYX}dm ; \
+	                      -DPYTHON_EXECUTABLE:FILEPATH=$$(which python$${PYX}) \
+	                      -DCMAKE_INSTALL_LIBDIR=/usr/lib/debug/lib/$(DEB_HOST_MULTIARCH) \
+	                      -DPYTHON_DEBUG_LIBRARY:FILEPATH=/usr/lib/$(DEB_HOST_MULTIARCH)/libpython$${PYX}d.so ; \
 	done

 override_dh_auto_build:
@ -65,12 +63,16 @@ override_dh_install:
 	dh_install \
 	    -plibarcus-dbg \
 	    -ppython3-arcus-dbg \
-	--sourcedir=debian/tmp-dbg --list-missing
-	dh_install -a --remaining-packages --fail-missing
+	    --sourcedir=debian/tmp-dbg \
+	    --list-missing
+	dh_install \
+	    -a \
+	    --remaining-packages \
+	    --fail-missing

 override_dh_strip:
 	dh_strip -plibarcus3 --dbg-package=libarcus-dbg
 	dh_strip -ppython3-arcus --dbg-package=python3-arcus-dbg

 override_dh_auto_test:
-		dh_auto_test || true
+	dh_auto_test || true
--- a/libCharon/changelog
+++ b/libCharon/changelog
@ -1,5 +1,5 @@
-libcharon (3.6) unstable; urgency=medium
+libcharon (4.14) unstable; urgency=medium

  * Initial release

- -- Thomas Karl Pietrowski <thopiekar@googlemail.com>  Tue, 20 Mar 2018 18:05:49 +0200
+ -- Thomas Karl Pietrowski <thopiekar@gmail.com>  Tue, 20 Mar 2018 18:05:49 +0200
--- a/libCharon/control
+++ b/libCharon/control
@ -1,10 +1,11 @@
 Source: libcharon
 Section: devel
 Priority: optional
-Maintainer: Thomas Karl Pietrowski <thopiekar@googlemail.com>
+Maintainer: Thomas Karl Pietrowski <thopiekar@gmail.com>
 Build-Depends:
 debhelper (>= 9),
 cmake,
+ dh-python,
 python3-all-dev, python3-all-dbg,
 Standards-Version: 3.9.8
 X-Python3-Version: >= 3.4
--- a/libCharon/rules
+++ b/libCharon/rules
@ -35,5 +35,5 @@ override_dh_auto_test:
 	    dh_auto_test --builddirectory=build-$${PYX} || true ; \
 	done

-override_dh_install:
-	dh_install --fail-missing
+override_dh_missing:
+	dh_missing --fail-missing
--- a/libSavitar/changelog
+++ b/libSavitar/changelog
@ -1,5 +1,5 @@
-libsavitar (3.6) unstable; urgency=medium
+libsavitar (4.14) unstable; urgency=medium

  * Initial release

- -- Thomas Karl Pietrowski <thopiekar@googlemail.com>  Thu, 09 Feb 2017 18:12:16 +0100
+ -- Thomas Karl Pietrowski <thopiekar@gmail.com>  Thu, 09 Feb 2017 18:12:16 +0100
--- a/libSavitar/control
+++ b/libSavitar/control
@ -1,10 +1,15 @@
 Source: libsavitar
 Section: devel
 Priority: optional
-Maintainer: Thomas Karl Pietrowski <thopiekar@googlemail.com>
-Build-Depends: debhelper (>= 9), cmake,
+Maintainer: Thomas Karl Pietrowski <thopiekar@gmail.com>
+Build-Depends:
+ debhelper (>= 9),
+ dh-python,
+ cmake,
+# Python
 python3-all-dev, python3-all-dbg,
- python3-sip-dev, python3-sip-dbg,
+# SIP
+ python3-sip-dev,
 Standards-Version: 3.9.8
 X-Python3-Version: >= 3.4
 Homepage: https://github.com/Ultimaker/libSavitar
--- a/libSavitar/rules
+++ b/libSavitar/rules
@ -1,13 +1,13 @@
 #!/usr/bin/make -f
 # See debhelper(7) (uncomment to enable)
 # output every command that modifies files on the build system.
-export DH_VERBOSE = 1
+export DH_VERBOSE=1

-CMAKE_COMMON_OPTIONS := -DCMAKE_LIBRARY_PATH=$(DEB_HOST_MULTIARCH) \
-                        -DBUILD_EXAMPLES:BOOL=OFF
+CMAKE_COMMON_OPTIONS:=-DCMAKE_LIBRARY_PATH=$(DEB_HOST_MULTIARCH) \
+                      -DBUILD_EXAMPLES:BOOL=OFF

 %:
-	dh $@ --with python3 --buildsystem=cmake --parallel
+	dh $@ --buildsystem=cmake --with python3 --parallel

 override_dh_auto_clean:
 	rm -rf build-*
@ -15,32 +15,31 @@ override_dh_auto_clean:
 	- rm -rf debian/tmp-dbg

 override_dh_auto_configure:
+	# RELEASE WITH DEBUG
 	for PYX in $(shell py3versions -rv) ; do \
 	    mkdir -p build-$${PYX}; \
 	    dh_auto_configure -a \
-                          --builddirectory=build-$${PYX} -- \
-	                      $(CMAKE_COMMON_OPTIONS) \
-	                      -DCMAKE_BUILD_TYPE:STRING="RelWithDebInfo" \
-	                      -DCMAKE_INSTALL_LIBDIR=/usr/lib/$(DEB_HOST_MULTIARCH) \
-	                      -DPYTHON_LIBRARY:FILEPATH=/usr/lib/$(DEB_HOST_MULTIARCH)/libpython$${PYX}m.so \
-	                      -DPYTHON_SITE_PACKAGES_DIR:FILEPATH=/usr/lib/python$${PYX}/dist-packages \
-	                      -DPYTHON_INCLUDE_DIR:FILEPATH=/usr/include/python$${PYX}m \
-	                      -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/python$${PYX} ; \
+	        --builddirectory=build-$${PYX} -- \
+	        $(CMAKE_COMMON_OPTIONS) \
+	        -DCMAKE_BUILD_TYPE:STRING="RelWithDebInfo" \
+	        -DPython_VERSION:STRING="$${PYX}" \
+	        -DPYTHON_SITE_PACKAGES_DIR:FILEPATH=/usr/lib/python$${PYX}/dist-packages \
+	        -DPYTHON_EXECUTABLE:FILEPATH=$$(which python$${PYX}) \
+	        -DCMAKE_INSTALL_LIBDIR=/usr/lib/$(DEB_HOST_MULTIARCH) ; \
 	done
 	
 	# DEBUG
 	for PYX in $(shell py3versions -rv) ; do \
 	    mkdir -p build-$${PYX}-dbg; \
 	    dh_auto_configure -a \
-                          --builddirectory=build-$${PYX}-dbg -- \
-	                      $(CMAKE_COMMON_OPTIONS) \
-	                      -DCMAKE_BUILD_TYPE:STRING="Debug" \
-	                      -DCMAKE_INSTALL_LIBDIR=/usr/lib/debug/lib/$(DEB_HOST_MULTIARCH) \
-	                      -DPYTHON_LIBRARY:FILEPATH=/usr/lib/$(DEB_HOST_MULTIARCH)/libpython$${PYX}m.so \
-	                      -DPYTHON_DEBUG_LIBRARY:FILEPATH=/usr/lib/$(DEB_HOST_MULTIARCH)/libpython$${PYX}dm.so \
-	                      -DPYTHON_SITE_PACKAGES_DIR:FILEPATH=/usr/lib/python$${PYX}/dist-packages \
-	                      -DPYTHON_INCLUDE_DIR:FILEPATH=/usr/include/python$${PYX}dm \
-	                      -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/python$${PYX}dm ; \
+	        --builddirectory=build-$${PYX}-dbg -- \
+	        $(CMAKE_COMMON_OPTIONS) \
+	        -DCMAKE_BUILD_TYPE:STRING="Debug" \
+	        -DPython_VERSION:STRING="$${PYX}" \
+	        -DPYTHON_SITE_PACKAGES_DIR:FILEPATH=/usr/lib/python$${PYX}/dist-packages \
+	        -DPYTHON_EXECUTABLE:FILEPATH=$$(which python$${PYX}) \
+	        -DCMAKE_INSTALL_LIBDIR=/usr/lib/debug/lib/$(DEB_HOST_MULTIARCH) \
+	        -DPYTHON_DEBUG_LIBRARY:FILEPATH=/usr/lib/$(DEB_HOST_MULTIARCH)/libpython$${PYX}d.so ; \
 	done

 override_dh_auto_build:
@ -73,4 +72,4 @@ override_dh_strip:
 	dh_strip -ppython3-savitar --dbg-package=python3-savitar-dbg

 override_dh_auto_test:
-		dh_auto_test || true
+	dh_auto_test || true
--- a/pynest2d/README.Debian
+++ b/pynest2d/README.Debian
--- a/pynest2d/README.source
+++ b/pynest2d/README.source
@ -0,0 +1,10 @@
+cura for Debian
+---------------
+
+<this file describes information about the source package, see Debian policy
+manual section 4.14. You WILL either need to modify or delete this file>
+
+
+
+ -- Thomas-Karl Pietrowski <thopiekar@unknown>  Thu, 30 Jul 2015 13:47:20 +0200
+
--- a/pynest2d/changelog
+++ b/pynest2d/changelog
@ -0,0 +1,5 @@
+pynest2d (4.14) unstable; urgency=low
+
+  * Initial release
+
+ -- Thomas Karl Pietrowski <thopiekar@gmail.com>  Sun, 10 Jan 2021 13:47:36 +0200
--- a/pynest2d/compat
+++ b/pynest2d/compat
@ -0,0 +1 @@
+10
--- a/pynest2d/control
+++ b/pynest2d/control
@ -0,0 +1,58 @@
+Source: pynest2d
+Section: devel
+Priority: optional
+Maintainer: Thomas Karl Pietrowski <thopiekar@gmail.com>
+Build-Depends:
+# Debhelper and build systems
+ debhelper (>= 10),
+ dh-python,
+ cmake,
+ pkg-config,
+# Python3
+ python3-all-dev,
+ python3-all-dbg,
+# SIP
+ python3-sip-dev,
+ python3-sip-dbg,
+# libnest2d and others
+ libnest2d-dev,
+ libboost-dev,
+ libpolyclipping-dev,
+ libnlopt-cxx-dev,
+Standards-Version: 3.9.8
+X-Python3-Version: >= 3.4
+Homepage: https://github.com/Ultimaker/pynest2d
+Vcs-Git: https://github.com/Ultimaker/pynest2d.git
+Vcs-Browser: https://github.com/Ultimaker/pynest2d
+
+Package: python3-pynest2d
+Architecture: any
+Section: python
+Depends:
+ ${shlibs:Depends},
+ ${python3:Depends},
+ ${misc:Depends},
+Provides:
+ ${python3:Provides}
+XB-Python3-Version:
+ ${python3:Versions}
+Description: pynest2d - CPython bindings for libnest2d
+ Bindings are written in SWIG and allows to be called from Python using Numpy.
+ .
+ This package provides bindings for Python 3
+
+Package: python3-pynest2d-dbg
+Architecture: any
+Section: python
+Depends:
+ ${shlibs:Depends},
+ ${python3:Depends},
+ ${misc:Depends},
+Provides:
+ ${python3:Provides}
+XB-Python3-Version:
+ ${python3:Versions}
+Description: pynest2d - CPython bindings for libnest2d
+ Bindings are written in SWIG and allows to be called from Python using Numpy.
+ .
+ This package provides bindings for Python 3 (debug)
--- a/pynest2d/copyright
+++ b/pynest2d/copyright
@ -0,0 +1,38 @@
+Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: cura
+Source: <url://example.com>
+
+Files: *
+Copyright: <years> <put author's name and email here>
+           <years> <likewise for another author>
+License: <special license>
+ <Put the license of the package here indented by 1 space>
+ <This follows the format of Description: lines in control file>
+ .
+ <Including paragraphs>
+
+# If you want to use GPL v2 or later for the /debian/* files use 
+# the following clauses, or change it to suit. Delete these two lines
+Files: debian/*
+Copyright: 2015 Thomas-Karl Pietrowski <thopiekar@unknown>
+License: GPL-2+
+ This package is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+ .
+ This package is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+ .
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <https://www.gnu.org/licenses/>
+ .
+ On Debian systems, the complete text of the GNU General
+ Public License version 2 can be found in "/usr/share/common-licenses/GPL-2".
+
+# Please also look if there are files or directories which have a
+# different copyright/license attached and list them here.
+# Please avoid picking licenses with terms that are more restrictive than the
+# packaged work, as it may make Debian's contributions unacceptable upstream.
--- a/pynest2d/docs
+++ b/pynest2d/docs
@ -0,0 +1 @@
+README.md
--- a/pynest2d/python3-pynest2d-dbg.install
+++ b/pynest2d/python3-pynest2d-dbg.install
@ -0,0 +1 @@
+/usr/lib/python3*
--- a/pynest2d/python3-pynest2d.install
+++ b/pynest2d/python3-pynest2d.install
@ -0,0 +1 @@
+/usr/lib/python3*
--- a/pynest2d/rules
+++ b/pynest2d/rules
@ -0,0 +1,78 @@
+#!/usr/bin/make -f
+# See debhelper(7) (uncomment to enable)
+# output every command that modifies files on the build system.
+export DH_VERBOSE=1
+
+CMAKE_COMMON_OPTIONS:=-DCMAKE_LIBRARY_PATH=$(DEB_HOST_MULTIARCH) \
+                      -DBUILD_EXAMPLES:BOOL=OFF
+
+%:
+	dh $@ --buildsystem=cmake --with python3 --parallel
+
+override_dh_auto_clean:
+	rm -rf build-*
+	- rm -rf debian/tmp
+	- rm -rf debian/tmp-dbg
+
+override_dh_auto_configure:
+	# RELEASE WITH DEBUG
+	for PYX in $(shell py3versions -rv) ; do \
+	    mkdir -p build-$${PYX}; \
+	    dh_auto_configure -a \
+	        --builddirectory=build-$${PYX} -- \
+	        $(CMAKE_COMMON_OPTIONS) \
+	        -DCMAKE_BUILD_TYPE:STRING="RelWithDebInfo" \
+	        -DPYTHON_SITE_PACKAGES_DIR:FILEPATH=/usr/lib/python$${PYX}/dist-packages \
+	        -DPYTHON_EXECUTABLE:FILEPATH=$$(which python$${PYX}) \
+	        -DCMAKE_INSTALL_LIBDIR=/usr/lib/$(DEB_HOST_MULTIARCH) ; \
+	done
+	
+	# DEBUG
+	for PYX in $(shell py3versions -rv) ; do \
+	    mkdir -p build-$${PYX}-dbg; \
+	    dh_auto_configure -a \
+	        --builddirectory=build-$${PYX}-dbg -- \
+	        $(CMAKE_COMMON_OPTIONS) \
+	        -DCMAKE_BUILD_TYPE:STRING="Debug" \
+	        -DPYTHON_SITE_PACKAGES_DIR:FILEPATH=/usr/lib/python$${PYX}/dist-packages \
+	        -DPYTHON_EXECUTABLE:FILEPATH=$$(which python$${PYX}) \
+	        -DCMAKE_INSTALL_LIBDIR=/usr/lib/debug/lib/$(DEB_HOST_MULTIARCH) \
+	        -DPYTHON_DEBUG_LIBRARY:FILEPATH=/usr/lib/$(DEB_HOST_MULTIARCH)/libpython$${PYX}d.so ; \
+	done
+
+override_dh_auto_build:
+	for PYX in $(shell py3versions -rv) ; do \
+	    dh_auto_build -a --builddirectory=build-$${PYX}; \
+	    dh_auto_build -a --builddirectory=build-$${PYX}-dbg; \
+	done
+
+override_dh_auto_install:
+	for PYX in $(shell py3versions -rv) ; do \
+	    dh_auto_install -a --builddirectory=build-$${PYX} --destdir=debian/tmp; \
+	    dh_auto_install -a --builddirectory=build-$${PYX}-dbg --destdir=debian/tmp-dbg; \
+	done
+
+override_dh_auto_test:
+	for PYX in $(shell py3versions -rv) ; do \
+	    dh_auto_test --builddirectory=build-$${PYX}; \
+	    dh_auto_test --builddirectory=build-$${PYX}-dbg; \
+	done
+
+override_dh_install:
+	dh_install \
+	    -ppython3-pynest2d-dbg \
+	    --sourcedir=debian/tmp-dbg \
+	    --list-missing
+	dh_install \
+	    -a \
+	    --remaining-packages \
+	    --fail-missing
+
+override_dh_missing:
+	dh_missing --fail-missing
+
+override_dh_strip:
+	dh_strip -ppython3-pynest2d --dbg-package=python3-pynest2d-dbg
+
+override_dh_auto_test:
+	dh_auto_test || true
--- a/pynest2d/source/format
+++ b/pynest2d/source/format
@ -0,0 +1 @@
+3.0 (native)
				`@ -1 +0,0 @@`
				`/usr/lib/cura/plugins/UltimakerMachineActions`
				`@ -1 +0,0 @@`
				`stb_0.0.1-1_source.buildinfo unknown optional`