* Previously, it would run `git fetch <remote.name> <change refspec>
<remote.fetch>, which would fetch all the branches, even if 'sync-c'
was set to true in the manifest.
* Fix that, since all it needs to fetch is the change that was asked
for, and nothing else.
* For some more info, refer to the discussion on:
I42a9d419b51f5da03f20a640ea68993cda4b6500
Change-Id: Ibc801695d56fc16e56f999e0f61393f54461785f
git-remote-persistent-https proxy implementations may pass cookie file
configuration to git-remote-https. When fetching bundles for
persistent-http(s) URLs, use the -print_config flag (if supported) to
extract this information from the proxy binary and pass it to curl,
overriding http.cookiefile from .gitconfig.
This adds a few ms overhead per clone.bundle fetch, which should be
acceptable since it happens only on the initial clone, which takes
much longer anyway.
Change-Id: I03be8ebaf8d3005855d33998cd8ecd412e8ec287
Server auth middleware may return a 200 from a clone.bundle request
that is not a bundle file, but instead a login or access denied page.
Instead of just checking the file size, actually check the first few
bytes of the file to ensure it is a bundle file before proceeding.
Change-Id: Icea07567c568a24fd838e5cf974c58f9e4abd7c0
This adds the ability to have reviews pushed to a different branch
from the one on which changes are based. This is useful for "gateway"
systems without smartsync.
Change-Id: I3a8a0fabcaf6055e62d3fb55f89c944e2f81569f
Add a new module with methods for checking the Python version.
Instead of handling Python3 imports with try...except blocks, first
check the python version and then import the relevant modules. This
makes the code a bit cleaner and will result in less diff when/if we
remove support for Python < 3 later.
Use the same mechanism to handle `input` vs. `raw_input` and add
suppression of pylint warnings caused by redefinition of the built-in
method `input`.
Change-Id: Ia403e525b88d77640a741ac50382146e7d635924
Also-by: Chirayu Desai <cdesai@cyanogenmod.org>
Signed-off-by: Chirayu Desai <cdesai@cyanogenmod.org>
When running 'repo init --reference=<mirror>', the mirror will be
used for all projects except the manifest project. This is because
the _InitGitDir function uses the 'repo.reference' git config
value specified in the manifest git, which has no effect when
creating the manifest git as that value will be set after the git
has been successfully cloned.
Information about where the manifest git is located on the server
is only known when performing the 'repo init', so that information
has to be provided when cloning the git in order for it to set up
a proper mapping.
Change-Id: I47a2c8b3267a4065965058718ce1def4ecb34d5a
Signed-off-by: Chirayu Desai <cdesai@cyanogenmod.org>
Fetching all tags for a shallow git results in an
inconstent git and forces git to fetch more than
the depth specified.
This change teaches repo not to fetch any tags in a
repository initialised with the depth option.
Change-Id: I557ead9f88fa0d6a19b1cb55b23bba1100fcb8f2
Signed-off-by: Patrik Ryd <patrik.ryd@stericsson.com>
* Fix imports.
* Use python3 syntax.
* Wrap map() calls with list().
* Use list() only wherever needed.
(Thanks Conley!)
* Fix dictionary iteration methods
(s/iteritems/items/).
* Make use of sorted() in appropriate places
* Use iterators directly in the loop.
* Don't use .keys() wherever it isn't needed.
* Use sys.maxsize instead of sys.maxint
TODO:
* Make repo work fully with python3. :)
Some of this was done by the '2to3' tool [1], by
applying the needed fixes in a way that doesn't
break compatibility with python2.
Links:
[1]: http://docs.python.org/2/library/2to3.html
Change-Id: Ibdf3bf9a530d716db905733cb9bfef83a48820f7
Signed-off-by: Chirayu Desai <cdesai@cyanogenmod.org>
If the clone-depth attribute is set on a project, its value will
be used to set the depth when fetching the git. The value, if
given, must be a positive integer.
The value in the clone-depth attribute overrides any value given to
repo init via the --depth command line option.
Change-Id: I273015b3724213600b63e40cca4cafaa9f782ddf
Change Details:
* Make "default" a special manifest group that matches any project that
does not have the special project group "notdefault"
* Use "default" instead of "all,-notdefault" when user does not specify
manifest group
* Expand -g option help to include example usage of manifest groups
Change Benefits:
* Allow a more intuitive and expressive manifest groups specification:
* "default" instead of "all,-notdefault"
* "default,foo" instead of "all,-notdefault,foo"
* "default,-foo" instead of "all,-notdefault,-foo"
* "foo,-default" which has no equivalent
* Default manifest groups behavior can be restored by the command
'repo init -g default'. This is significantly more intuitive than the
current equivalent command 'repo init -g all,-notdefault'.
Change-Id: I6d0673791d64a650110a917c248bcebb23b279d3
Repo now re-initialises the git-hooks reference directory
when updating the forest. This allows for any new template
files to be made available throughout the project forest
when updating the forest. Previous functionality required
the user to recreate the forest.
Change-Id: I9051265028a9e77d6139791547fff095bc195077
Signed-off-by: Patrik Ryd <patrik.ryd@stericsson.com>
HTTP can't use the older style of passing options as part of
the git receive-pack command line. Use the new style as defined
by https://gerrit-review.googlesource.com/42652 when connecting
over HTTP.
If the Gerrit server is too old to understand the % option
syntax used here one of two outcomes is possible:
- If no topic name was sent the server will fail with an error
message. This happens because the user tried to do an upload to
"refs/for/master%r=alice", and the branch does not exist.
The user can delete the options and retry the upload.
- If a topic was set the options will be read as part of the
topic string and shown on the change page in the topic field.
Either outcome is slightly better than the current behavior of
just dropping the data on the floor and forgetting whatever the
user tried to supply.
Change-Id: Ib2df62679e5bf3ee93d6b18c12ab6474f96d9106
Add an option to pass `--no-tags' to `git fetch'.
Change-Id: I4158cc369773e08e55a167091c38ca304a197587
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
If the user's git config specifies a cookie file for HTTP, use it when
fetching clone.bundle, as it may contain the required login credentials
to get access (e.g. when used with Compute Engine service accounts).
Change-Id: I12ee9e38694822ef1de4ed62138c3876c43f431b
(Previous submission of this change broke Android buildbot due to
incorrect regular expression for parsing git-config output. During
investigation, we also found that Android, which pulls Chromium, has a
workaround for Chromium's submodules; its manifest includes Chromium's
submodules. This new change, in addition to fixing the regex, also
take this type of workarounds into consideration; it adds a new
attribute that makes repo not fetch submodules unless submodules have a
project element defined in the manifest, or this attribute is
overridden by a parent project element or by the default element.)
We need a representation of git-submodule in repo; otherwise repo will
not sync submodules, and leave workspace in a broken state. Of course
this will not be a problem if all projects are owned by the owner of the
manifest file, who may simply choose not to use git-submodule in all
projects. However, this is not possible in practice because manifest
file owner is unlikely to own all upstream projects.
As git submodules are simply git repositories, it is natural to treat
them as plain repo projects that live inside a repo project. That is,
we could use recursively declared projects to denote the is-submodule
relation of git repositories.
The behavior of repo remains the same to projects that do not have a
sub-project within. As for parent projects, repo fetches them and their
sub-projects as normal projects, and then checks out subprojects at the
commit specified in parent's commit object. The sub-project is fetched
at a path relative to parent project's working directory; so the path
specified in manifest file should match that of .gitmodules file.
If a submodule is not registered in repo manifest, repo will derive its
properties from itself and its parent project, which might not always be
correct. In such cases, the subproject is called a derived subproject.
To a user, a sub-project is merely a git-submodule; so all tips of
working with a git-submodule apply here, too. For example, you should
not run `repo sync` in a parent repository if its submodule is dirty.
Change-Id: I4b8344c1b9ccad2f58ad304573133e5d52e1faef
When a command (eg, `repo forall`) expects the manifest project to
exist, but there is no manifest, an IOException gets raised. This
change defines a new Exception type to be raised in these cases and
raises it when project.py fails to read the manifest.
Change-Id: Iac576c293a37f7d8f60cd4f6aa95b2c97f9e7957
Enable the following Pylint warnings:
C0322: Operator not preceded by a space
C0323: Operator not followed by a space
C0324: Comma not followed by a space
And make the necessary fixes.
Change-Id: I74d74283ad5138cbaf28d492b18614eb355ff9fe
The repo coding style is to indent at 2 characters, but there are
many places where this is not followed.
Enable pylint warning "W0311: Bad indentation" and make sure all
indentation is at multiples of 2 characters.
Change-Id: I68f0f64470789ce2429ab11104d15d380a63e6a8
This option causes the git call to fail, which probably indicates a
programming error; callers should check the git version and change the
call appropriately if -c is not available. Failing loudly is preferable
to failing silently in the general case.
For an example of correctly checking at the call site, see I8fd313dd.
If callers prefer to fail silently, they may set GIT_CONFIG_PARAMETERS
in the environment rather than using the config kwarg to pass
configuration.
Change-Id: I0de18153d44d3225cd3031e6ead54461430ed334
Fixing some more pylint warnings:
W1401: Anomalous backslash in string
W0623: Redefining name 'name' from outer scope
W0702: No exception type(s) specified
E0102: name: function already defined line n
Change-Id: I5afcdb4771ce210390a79981937806e30900a93c
"except Exception as e" instead of "except Exception, e"
This is part of a transition to supporting Python 3. Python >= 2.6
support "as" syntax.
Note: this removes Python 2.5 support.
Change-Id: I309599f3981bba2b46111c43102bee38ff132803
We need a representation of git-submodule in repo; otherwise repo will
not sync submodules, and leave workspace in a broken state. Of course
this will not be a problem if all projects are owned by the owner of the
manifest file, who may simply choose not to use git-submodule in all
projects. However, this is not possible in practice because manifest
file owner is unlikely to own all upstream projects.
As git submodules are simply git repositories, it is natural to treat
them as plain repo projects that live inside a repo project. That is,
we could use recursively declared projects to denote the is-submodule
relation of git repositories.
The behavior of repo remains the same to projects that do not have a
sub-project within. As for parent projects, repo fetches them and their
sub-projects as normal projects, and then checks out subprojects at the
commit specified in parent's commit object. The sub-project is fetched
at a path relative to parent project's working directory; so the path
specified in manifest file should match that of .gitmodules file.
If a submodule is not registered in repo manifest, repo will derive its
properties from itself and its parent project, which might not always be
correct. In such cases, the subproject is called a derived subproject.
To a user, a sub-project is merely a git-submodule; so all tips of
working with a git-submodule apply here, too. For example, you should
not run `repo sync` in a parent repository if its submodule is dirty.
Change-Id: I541e9e2ac1a70304272dbe09724572aa1004eb5c
Fixing more issues found with pylint. Some that were supposed to
have been fixed in the previous sweep (Ie0db839e) but were missed:
C0321: More than one statement on a single line
W0622: Redefining built-in 'name'
And some more:
W0631: Using possibly undefined loop variable 'name'
W0223: Method 'name' is abstract in class 'name' but is not overridden
W0231: __init__ method from base class 'name' is not called
Change-Id: Ie119183708609d6279e973057a385fde864230c3
Fix the following issues reported by pylint:
C0321: More than one statement on a single line
W0622: Redefining built-in 'name'
W0612: Unused variable 'name'
W0613: Unused argument 'name'
W0102: Dangerous default value 'value' as argument
W0105: String statement has no effect
Also fixed a few cases of inconsistent indentation.
Change-Id: Ie0db839e7c57d576cff12d8c055fe87030d00744
Currently when doing a sync against a revision locked manifest,
sync has no option but to fall back to sync'ing the entire refs space;
it doesn't know which ref to ask for that contains the sha1 it wants.
This sucks if we're in -c mode; thus when we generate a revision
locked manifest, record the originating branch- and try syncing that
branch first. If the sha1 is found within that branch, this saves
us having to pull down the rest of the repo- a potentially heavy
saving.
If that branch doesn't have the desired sha1, we fallback to sync'ing
everything.
Change-Id: I99a5e44fa1d792dfcada76956a2363187df94cf1
Catch curl failures to download clone.bundle; don't let git try to parse
the 404 page as a bundle file (was causing much user confusion).
This should eliminate false error messages from init and sync such as:
error: '.repo/manifests.git/clone.bundle' does not look like a v2 bundle file
fatal: Could not read bundle '.repo/manifests.git/clone.bundle'.
error: RPC failed; result=22, HTTP code = 400
Signed-off-by: Matt Gumbel <matthew.k.gumbel@intel.com>
Change-Id: I7994f7c0baecfb45bb5a5850c48bd2a0ffabe773
Instead of every group being in the group "default", every project
is now in the group "all". A group that should not be downloaded
by default may be added to the group "notdefault".
This allows all group names to be positive (instead of removing groups
directly in the manifest with -default) and offers a clear way of
selecting every project (--groups all).
Change-Id: I99cd70309adb1f8460db3bbc6eff46bdcd22256f
urllib2 is not thread safe and may be causing sync to lock up or
not work correctly on various platforms. Instead use the command
line curl program.
Change-Id: I36eaf18bb4df089d26ea99d533cb015e7c616eb0
The Content-Length when resuming is the number of bytes that
remain in the file. To compute the total size as expected by
the progress meter, we must add the bytes already stored.
While we are in this method fix uses of % operator to ensure
a tuple is always supplied.
Change-Id: Ic899231b5bc0ab43b3ddb1d29845f6390e820115
The fix for issue #46 in 5d016502eb appears to break syncing in some
situations: the branch is deleted after the point where it's been
configured, which deletes part of its configuration and causes the
config to change each time you call `repo init`, alternating between a
configuration that works and one that doesn't.
Instead of deleting the branch with git branch -D, use git update-ref -d
which just deletes the ref (to avoid the rebase) without touching the
configuration for the branch that was set up during the first repo init.
This appears to ensure the config is left in a valid state all the time
no matter what combination of repo init commands you run, without
reintroducing the rebasing issue.
Change-Id: Iaadaa6e56a46840bbc593fa5b35cb5b34cd3ce69
This patch fixes repo behaviour when running sync -d with unmodified
topic branches.
Prior to this patch sync -d would see the latest revision is already
checked out, thus staying on the branch. Since "-d" means detach we
should follow git's behaviour and actually detach from the branch in
that case.
Basic test case - after a fresh repo init + sync -
* repo start --all testdetach
* repo sync -d
* repo status
-> status shows active topic branch "testdetach",
should show :
nothing to commit (working directory clean)
Change-Id: Ic1351e6b5721b76557a51ab09f9dd42c38a4b415
See repo issue #46 :
https://code.google.com/p/git-repo/issues/detail?id=46
When using repo init -b on an already existing repository,
the next sync will try to rebase changes coming from the old manifest
branch onto the new, leading in the best case scenario to conflicts
and in the worst case scenario to an incorrect "mixed up" manifest.
This patch fixes this by deleting the "default" branch in the local
manifest repository when the -d init switch is used, thus forcing
repo to perform a fresh checkout of the new manifest branch
Change-Id: I379e4875ec5357d8614d1197b6afbe58f9606751
Mirror manifest and repo projects are outside the manifest and
have no groups. Allow project groups to be None for these
projects.
Change-Id: I3e1c4add894fe1c43aa4e77a1fc1558aa10dd191
Allows to ff-only a gerrit patch
This patch is necessary to automatically ensure that the patch will
be correctly submitted on ff-only gerrit projects
You can now use:
repo download (--ff-only|-f) project changeid/patchnumber
This is useful to automate verification of fast forward status of a patch
in the context of build automation, and commit gating (e.g. buildbot)
Change-Id: I403a667557a105411a633e62c8eec23d93724b43
Signed-off-by: Erwan Mahe <erwan.mahe@intel.com>
Signed-off-by: Pierre Tardy <pierre.tardy@intel.com>
BZ: 4779
Allows to revert a gerrit patch
This patch is necessary for the on-demand creation of
engineering builds using buildbot
You can now use:
repo download [--revert|-r project changeid/patchnumber
This is useful to automate reverting of a patch
in the context of build automation, and regression bisection
Change-Id: I3985e80e4b2a230f83526191ea1379765a54bdcf
Signed-off-by: Erwan Mahe <erwan.mahe@intel.com>
Signed-off-by: Pierre Tardy <pierre.tardy@intel.com>
