This commit supports for the 'remote' attribute in
<extend-project>. This avoids the need to perform a <remove-project>
followed by a <project> in local manifests.
Change-Id: I9f9347913337ec9d159bc264d15ce97881ae5398
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/253092
Tested-by: Kyunam Jo <kyunam.jo@gmail.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Reject paths in <copyfile> & <linkfile> that try to use symlinks or
non-file or non-dirs.
We don't fully validate <linkfile> when src is a glob as it's a bit
complicated -- any component in the src could be the glob. We make
sure the destination is a directory, and that any paths in that dir
are created as symlinks. So while this can be used to read any path,
it can't be abused to write to any paths.
Bug: https://crbug.com/gerrit/11218
Change-Id: I68b6d789b5ca4e43f569e75e8b293b3e13d3224b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/233074
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Reject paths in <copyfile> & <linkfile> that point outside of their
respective scopes. This validates paths while parsing the manifest
as this should be quick & cheap: we don't access the filesystem as
this code runs before we've synced.
Bug: https://crbug.com/gerrit/11218
Change-Id: I8e17bb91f3f5b905a9d76391b29fbab4cb77aa58
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/232932
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Michael Mortensen <mmortensen@google.com>
This hasn't been used in many years to sign a release, so drop it
from the keyring to avoid confusing people.
Bug: https://crbug.com/gerrit/12229
Change-Id: Ifca7eee713d167c11f32252975724e5858e4c007
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/253133
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
This reflects the transition to the new 2.x series which will be
migrating to Python 3-only.
Bug: https://crbug.com/gerrit/10418
Change-Id: I6355ac955d26b930f8a3721d3526eec5bed92400
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/253132
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
This reverts commit 1e01a74445.
Not all platforms support select.poll() currently it seems.
At least macOS's Python 2 doesn't (while macOS Python 3 does).
Lets back this out for the existing release series and once we
start repo-2 which is Python 3-only, we can put this back in.
Change-Id: I205206b0fa4fe2d755f4fbc6ec683ad125f27cc2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/253072
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
In order to be able to use "--no-repo-verify" to work around an issue with
gpg-agent and long socket paths (see e.g. [1]), this change avoids GPG
being set up at all if that option is passed.
[1] https://github.com/elastic/elasticsearch/issues/17053
Change-Id: I1e5cbd8be2dc0084f12afe0ca33c789fdbc6fef9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/251108
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
This makes it consistent with the short option for current-branch in
repo sync.
Change-Id: I2848e87f45a66ef8d829576d0c0c4c0f7a8636a0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/241700
Tested-by: Diogo Ferreira <deovferreira@gmail.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Reviewed-by: Mike Frysinger <vapier@google.com>
After Ib546f5ebbc8a23875fbd14bf166fbe95b7dd244e, repo info now displays
the current project revision in the 'Current revision' field.
While the output is more consistent, there are use cases for the
revision expression as shown in the manifest. This patch re-adds the
manifest revision as a new 'Manifest revision' field.
Change-Id: I50c1559dcb7ceb69af07352b956d78f85b8f592e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/240799
Tested-by: Diogo Ferreira <deovferreira@gmail.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
select() has a limit of FD_SETSIZE file descriptors. If you run repo
sync -j500 you'll pretty quickly hit this limit and get "file descriptor
out of range for select" errors. poll() has no such limit.
Change-Id: I21f350e472bda1db03dcbcc437645c23dbc7a901
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/248852
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Theodore Dubois <tbodt@google.com>
No functional changes, just unifying duplicate code paths.
Change-Id: I6afa797ca1e1eb90abdc0236325003ae070cbfb3
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/247293
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
This makes it easy to run all the tests against multiple versions
of Python. We want to make sure Python 2.7 & 3.6+ work.
Change-Id: Ia7b16eb46a2aa7c240f03bb291987fa8cb215267
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/247174
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
This is needed to use tox, and tox lets us test multiple Python
versions easily.
Change-Id: I813c418a8f7109294a4adb9f6b21be459cbeca70
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/247173
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Rather than throw an exception when pytest itself exits non-zero,
pass that back up. The traceback is never useful, only confusing.
Change-Id: I0cd7bea730e13c9969154326057196295e550843
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/247175
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Before a2cd6aeae8, "repo mirror with --current-branch" fetches git data
using command
git fetch --progress --update-head-ok cros --tags
No refspec is specified, thus it fetches default refspec, which is +refs/heads/*:refs/heads/*
After a2cd6aeae8, the fetch command became
git fetch --progress --update-head-ok cros --tags +refs/tags/*:refs/tags/*
It did not only add tags refspec, but also suppressed the fetching of default refspec.
In other words, repo mirrors doesn't work if current_branch_only=True.
This CL explicitly adds the default refspec to command line if none is
specified.
Bug: https://crbug.com/gerrit/11990
Change-Id: Iadcf7b9aa50f53c47132cfe6c53b3fb2076ebca2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/246632
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Kuang-che Wu <kcwu@chromium.org>
The upload module tries to turn the strings into bytes before passing
to EditString, but it combines bytes & strings causing an error. The
return value might be bytes or string, but the caller only expects a
string. Lets simplify this by sticking to strings everywhere and have
EditString take care of converting to/from bytes when reading/writing
the underlying files. This also avoids possible locale confusion when
reading the file by forcing UTF-8 everywhere.
Bug: https://crbug.com/gerrit/11929
Change-Id: I07b146170c5e8b5b0500a2c79e4213cd12140a96
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/245621
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Series of steps:
* Create a local "b1" branch with `repo start b1` that tracks a remote
branch (totally fine)
* Manually create a local "b2" branch with `git branch --track b1 b2`
that tracks the local "b1" (uh-oh...)
* Delete the local "b1" branch manually or via `repo prune` (....)
* Try to process the "b2" branch with `repo prune`
Since b2 tracks a branch that no longer exists, everything blows up
at this point as we try to probe the non-existent ref. Instead, we
should flag this as unknown and leave it up to the user to resolve.
This probably could come up if a local branch was tracking a remote
branch that was deleted from the server, and users ran something like
`repo sync --prune` which cleaned up the remote refs.
Bug: https://crbug.com/gerrit/11485
Change-Id: I6b6b6041943944b8efa6e2ad0b8b10f13a75a5c2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/236793
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Reviewed-by: Kirtika Ruchandani <kirtika@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
If the local branch changed state since its last upload, the data
cached in .git/config related to the last uploaded CL might not be
that relevant. If we're able to fast forward merge to the latest
tree state, then let's do that. This would be akin to checking
out a detached head before syncing where we already switch state.
If we aren't able to fast forward merge, then it's not a big deal
as we'll continue on to the existing branch checking logic.
This would be easy to reproduce by doing something like:
$ repo start foo .
$ git revert HEAD
$ repo upload --cbr .
$ git reset --hard HEAD^
<CL is merged>
$ repo sync .
<we can fast forward>
Change-Id: I7d62f3d1ba5314a349d85b4dbb0ec8352eca18bb
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/238552
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
The current sync output displays "Fetching project" and "Checking out
project" messages and progress bar updates independently leading to a
lot of spam. Lets merge these periodic outputs with the status bar to
get a little bit tighter output in the normal case. This doesn't solve
all our problems, but gets us closer.
Bug: https://crbug.com/gerrit/11293
Change-Id: Icd627830af4dd934a9355b7ace754b56dc96cfef
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/244934
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
If you run `repo sync -l foo` without first `repo sync -n foo`,
repo sets up an invalid gitdir tree that gets wedged and requires
manual recovery. Add a sanity check to abort cleanly first.
Change-Id: Iad865ea860a3f1fd2f39ce683fe66bd4380745a5
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/244732
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
When repo sync fails because some git trees are not in clean state and
as such can not be rebased automatically, it is a pain to figure out
which trees are the culprits.
With this patch the list of offending trees is printed when repo sync
reports checkout errors.
TEST=ran 'repo sync' and observed the proper list of directories show
up after the final error message
Bug: https://crbug.com/gerrit/11293
Change-Id: Icdf1a03e9014ecb184f331f513cc9a2efc7d11ed
Signed-off-by: Vadim Bendebury <vbendeb@google.com>
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/244053
Reviewed-by: Mike Frysinger <vapier@google.com>
Use open() as a context manager to simplify the close logic and make
the code easier to read & understand. This is also more Pythonic.
Change-Id: I579d03cca86f99b2c6c6a1f557f6e5704e2515a7
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/244734
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Hitting Ctrl-C in the middle of this func will leave the .git in a
bad state that requires manual recovery. The code tries to catch
all exceptions and recover by deleting the incomplete .git dir, but
it omits KeyboardInterrupt which Exception misses.
We could add that to the recovery path, but we can make this more
robust with a different approach: set up everything in .git.tmp/
and only move it to .git/ once we've fully initialized it.
Change-Id: I0f5b97f2e19fc39cffc3e5e23993a2da7220f4e3
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/244733
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
In CrOS, our infra has to deal with partial checkouts constantly
(for a variety of reasons). To help reset back to a good state,
we run git commands via `repo forall`, but don't care about the
missing checkouts. Add a flag so we can disambiguate between
missing repos and failing git subcommands.
Bug: https://crbug.com/1013377
Bug: https://crbug.com/1013623
Change-Id: Ie3498c6d111276c60d2ecedbba21bfa778588d50
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/241935
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
The plan previously documented was <=1.13.x is Python 2 and >=1.14.x
is Python 3. Other projects that migrated Python versions and drop
support for older have tended to take a more drastic version jump to
make it clearer to users. So lets adjust the plan to say <=1.x will
support Python 2, and >=2.x will be Python 3-only.
This also allows us to harmonize the repo launcher version. It is
currently sitting at v1.26 and has been incremented independently of
the repo version for the life of the project. While we might know
these lower nuances, pretty much no one else does and it just leads
to confusion: do I know version 1.26 or version 1.13.7? Or do I
have both? What does that even mean?
Once we update the major version to 2.0.0, we can also adjust the
launcher script to 2.0.0, and then the launcher release process will
be tied to a new repo release in general.
Bug: https://crbug.com/gerrit/10418
Change-Id: Idb2257371a06e56d2923cf717345c028f49176a2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/240372
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
`repo forall <proj>` will look up all <proj> in the manifest for all
manifest groups regardless of which are active. If <proj> is checked
out to different locations depending on the group, this ultimately
fails as we're unable to locate all of them.
Simple fix is to only include projects that match the manifest groups
that we already passed down & initialized to the active set, and that
we already use when getting the default project list.
Bug: https://crbug.com/gerrit/11677
Bug: https://crbug.com/1011226
Change-Id: I975f10f9a9e5a1cad7d87344123f8003732dab27
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/239652
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
The "Current revision" field shows the revision as listed in the
manifest. I think most users expect this to show the revision
that the git tree is checked out to instead. Switch the output
to show that revision instead, and add a "Current branch" if it
matches a local branch.
Change-Id: Ib546f5ebbc8a23875fbd14bf166fbe95b7dd244e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/239240
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
imp is deprecatedon py3. It's also not used with py3, so just move it
to the py2 import block
Test: run `repo` command and verify warning is no longer present
Test: verify `repo sync` and `repo upload` function as expected
Change-Id: I9d59403d7819c4a478c9f54cbef114f8a96486a5
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/239713
Tested-by: Rashed Abdel-Tawab <rashedabdeltawab@gmail.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
If the repo client checkout is in an incomplete sync state, the work
git repo might be in a bad way. Turn errors parsing HEAD into None
since callers of CurrentBranch already need to account for it.
Change-Id: Ia7682e29ef4182006b1fb5f5e57800f8ab67a9f4
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/239239
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
If the user passes in bad projects like `repo info asdf`, we currently
silently swallow those and do nothing. Allow NoSuchProjectError to
bubble up to main which will handle & triage this correctly for us.
Change-Id: Ie04528e7b7a164293063a636813a73eaabdd5bc3
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/239238
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Depending on where/how repo is invoked, the active version might be
from a git tree, and it might be different from the .repo/repo.git/
version in the current repo client checkout. Report both if they're
different so it's clearer.
Lets also include the two different User-Agent's that we set up when
talking to networked services.
Bug: https://crbug.com/gerrit/11144
Change-Id: I2ebb6e3ac30e374a8406cab3e4438087246a8c57
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/239234
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
We've been setting the User-Agent header when making connections
from repo itself, but not when running git (as the latter will set
up User-Agent itself). Our Gerrit/Git admins say it'll be helpful
if we pass through the repo version settings even when running git.
We currently set GIT_HTTP_USER_AGENT and not GIT_USER_AGENT as it's
unclear if the extended form works over all protocols. We can wait
for a user request.
Bug: https://crbug.com/gerrit/11144
Change-Id: I21d293f49534058dbc23225152451df26c5b7bef
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/239233
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
If `git grep` fails in any project checkout (e.g. an incomplete
sync), make sure we print that error clearly rather than blowing
up, and exit non-zero in the process.
Bug: https://crbug.com/gerrit/11613
Change-Id: I31de1134fdcc7aaa9814cf2eb6a67d398eebf9cf
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/239237
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
If `git diff` fails in any project checkout (e.g. an incomplete
sync), make sure we print that error clearly rather than blowing
up, and exit non-zero in the process.
Bug: https://crbug.com/gerrit/11613
Change-Id: I12f278427cced20f23f8047e7e3dba8f442ee25e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/239236
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
If a repo doesn't exist (e.g. an incomplete sync), make sure we exit
non-zero when they get skipped.
Change-Id: Ifff711e374416b1e6b9b8da4fdc6f14b27ced450
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/239235
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Convert the RepoUserAgent function into a UserAgent class. This
makes it cleaner to hold internal state, and will make it easier
to add a separate git User-Agent, although we don't do it here.
We make the RepoSourceVersion independent of GitCommand so that
it can be called by the class (later).
Bug: https://crbug.com/gerrit/11144
Change-Id: Iab4e1f974b8733a36b243b2d03f5085a96effa19
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/239232
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
We can't import the main module, so move the UserAgent helper out of
it and into the git_command module so it can be used in more places.
Bug: https://crbug.com/gerrit/11144
Change-Id: I8093c8a20bd1dc7d612d0e2a85180341817c0d86
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/231057
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
This uses coloring style like we use in grep/forall already.
Change-Id: I317e2e47567a30c513083c48e7c7c40b091bb29a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/238555
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Lets switch the default rebase behavior to align with our new sync
behavior: we try to rebase all projects by default and exit/summarize
things at the very end if there were any errors. Or if people want
to exit immediately, they can use the new --fail-fast option.
Change-Id: I436ac563f972b45de6ce9ad74da1e4870e584902
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/238553
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Cut out some more standalone code from Execute to make this func a
bit more manageable. The manifest project update is pretty simple
and standalone, but still takes up a good chunk of what's left.
Change-Id: Idc2442d9def495eccd0a49cda203c44aef16f129
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/236614
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
We've rolled quite a number of fixes since the last update, including
a lot of Python 3 improvements. Lets bump the wrapper version for it.
Change-Id: I6c6c04c3c8241bf8e8bcf26603549ae4595fede8
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/237812
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
