If a remote deletes a ref, and it points to an object that doesn't
exist locally, we can get into a bad state, and the only way for the
user to recover is to run `repo sync --prune` (and to know that is
the option they need). The error message is not helpful:
fatal: bad object refs/remotes/cros/firmware-zork-13421.B-master
error: https://chromium.googlesource.com/chromiumos/platform/ec did not send all necessary objects
This situation can also come up when the remote renames refs in a
UNIX FS incompatible way. For example, replacing refs/heads/foo
with refs/heads/foo/bar.
Also add a --no-prune option for users to disable the behavior.
Bug: https://issuetracker.google.com/203366450
Change-Id: Icf45d838a10938feb091d29800f7e49240830ec3
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/322956
Reviewed-by: Andrew Lamb <andrewlamb@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
This has been broken since it was added where --tags was actually
the same as --no-tags. Oddly, it was copied from init where the
logic is correct.
Bug: https://crbug.com/gerrit/12401
Change-Id: I15b89da1a655176a11bebc22573b25c728055328
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/322955
Reviewed-by: Andrew Lamb <andrewlamb@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
urllib.requests.urlopen also supports file, so call it unless the
scheme is 'gs'. This adds http, https, and ftp support.
Change-Id: I3f215c3ebd8e6dee29ba14c7e79ed99d37287109
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/322095
Reviewed-by: Michael Kelly <mkelly@arista.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Matt Story <mstory@arista.com>
Previously gsutil stderr was getting piped into stdout, which
yields bad results if there are non-fatal warnings in stderr.
Additionally, we should fail outright if gsutil fails (by adding
`check = True`) rather than fail later on when we try to sync to
a manifest that is in fact just a stderr dump.
BUG=none
TEST=manual runs with bad gs urls
Change-Id: Id71791d0c3f180bd0601ef2c783a8e8e4afa8f59
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/321935
Tested-by: Jack Neus <jackneus@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
sync should not attempt to sync the manifest project if it was
created from a standalone manifest. The current work around is to
run sync with --nmu.
BUG=none
TEST=manual runs
Change-Id: I2e121af0badf9642143e77c7af89d1c2d993b0f3
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/321195
Tested-by: Jack Neus <jackneus@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Previously `git gc` was being run on every gitdir even when they shared
the same objects. Instead only call it once and use pack-refs for the
gitdirs that were not gc'ed.
Bug: https://crbug.com/gerrit/15113
Test: repo sync -j # and check that git pack-refs is called
Change-Id: Icff37ab3ec78cfb44391d8cc7f2d875991532320
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/320275
Tested-by: Allen Webb <allenwebb@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
`repo init` doesn't do anything on re-init when the checkout has
been initialized using --standalone manifest. Rather than let the
tool run through its existing flows (which happen to noop), check
the args and explicitly quit if a bare `repo init` is run on a
standalone checkout.
BUG=none
TEST=manual tests
Change-Id: Ie4346ef6df1282ec3e3f8045a08138c93653fece
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/320735
Tested-by: Jack Neus <jackneus@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
We were accidentally always setting manifest.standlone in config,
which was messing up behavior for standard use cases.
BUG=gerrit:15160
TEST=manual runs
Change-Id: Ic80f084ae97de5721aced3bb52d3ea9115f8d833
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/320715
Tested-by: Jack Neus <jackneus@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Rather than display "3.0" all the time and confuse people, extract
the version from the launcher we're signing and display that.
Also reformat the text to follow our current practice: upload the
versioned launcher by itself first, and then later copy that over
the default.
And while we're here, add tips for rollbacks.
Change-Id: I1654425c88e5c67d78879f2f33ad685c59be14dc
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/319637
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
gc.autoDetach is enabled by default which makes 'git gc --auto' return
immediately and run in background. This can lead to a pile up of
operations all using large amounts of memory at the same time. To avoid
this set gc.autoDetach to false so that the garbage collect task waits
for instances to finish before spawning more.
Bug: https://crbug.com/gerrit/15113
Test: repo sync -j # and check the number of 'git gc' processes
Change-Id: Ic0815156ba3db03972968f33f6f9f51e4928f23b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/319835
Tested-by: Allen Webb <allenwebb@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
The v2.14.[345] releases were cut on a branch based on v2.14.2. We
had some regression fixes we wanted in v2.14, but too many risky
changes landed in main since to cut another v2.14.x directly, and
we didn't want to destabilize even more by pushing a v2.15 right
away. So we branched to keep things healthy.
But people with old checkouts trying to upgrade from those versions
run into an old repo bug where it only selfupdates with fast-forwards,
and repo can't fast-forward from those divergent histories. So let's
do a merge commit to stitch the history back together.
There's no actual changes in here.
Change-Id: I05a96048e3846321e57c5f5224fb8dcf3c191d35
For older versions of repo, this would make it easier for it to perform
a self update by making it a fast-forward from the following tags:
v1.13.9.2, v1.13.9.3, v1.13.9.4, v1.13.10, v1.13.11
Change-Id: Ia75776312eaf802a150db8bd7c0a6dce57914580
removeprefix is available i python 3.9. Mac and Linux are running in
a version below 3.9. Thus tests are failing with the following error:
"AttributeError: 'str' object has no attribute 'removeprefix' "
Replaced the removeprefix with custom function which we will delete
once Linux and macOS versions are updated.
Tested:
$ ./run_tests
Bug: [google internal] b/201453085
Change-Id: I9b4d564ff1176e1b4471805ef05472c1914cd9f9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/319375
Tested-by: Raman Tenneti <rtenneti@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Now that _do throws an exception when `git` fails, update the logic
that tries to read config files but the file doesn't exist.
Bug: b/192664812
Change-Id: I6417ecd70891b8f2d5f2bdb819f91df69ac4b70c
Test: `repo upload` no longer crashes when .repo/config doesn't exist
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/319295
Reviewed-by: Jack Neus <jackneus@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When a hard revision ID is provided in a regular project tag then the
revisionId is updated as well if it is a commit hash. The difference
is that if the revisionExpr is a commit, git-repo needs to update
refs/remotes/m/master with update-ref not symbolic-ref, as the latter
must refer to another ref, not to a specific commit.
Change-Id: I215a62dabb30225e480ad2c731416d775fc0c750
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/310963
Tested-by: Michael Kelly <mkelly@arista.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
This allows us to move the repository to a new location in the source
tree without having to remove-project + add a new project tag.
Change-Id: I4dba6151842e57f6f2b8fe60cda260ecea68b7b4
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/310962
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Michael Kelly <mkelly@arista.com>
The current code would check for enrollment status when the user did not
explicitly specify --[no-]use-superproject and do not have a remembered
value in their repo client. However, because superproject only makes
sense for manifests that have one specified, we should skip the
enrollment logic in that case.
Address this by checking manifest.superproject prior to proceeding. This
would avoid showing the greeting message of superproject enrollment
which can be confusing for developers.
Tested:
For manifest without superproject:
- repo sync --use-superproject will still show message for
superproject;
- repo sync will not show message regardless of enrollment state
For manifest with superproject:
- repo sync will show message and perform enrollment if not
previously enrolled
Bug: https://crbug.com/gerrit/15039
Change-Id: Ic2be9f9d037f0e7cf3446da474a5a0d0e4bd88da
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/319255
Tested-by: Xin Li <delphij@google.com>
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
All the values of syncstate are strings, check the first byte and last
byte to see if it is an array. For syncstate data, there were no false
positives.
Tested:
$ repo_dev sync
Verified event logged for argv is "data-json".
$./run_tests
Bug: [google internal] b/201102002
Change-Id: Id56adb532b80267f08d09147ac663cdd5987ce87
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/319075
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
Some of the file removal calls are subject to race conditions (if
something else deletes the file), so extend our remove API to have
an option to ignore ENOENT errors. Then update a bunch of random
call sites to use this new functionality.
Change-Id: I31a9090e135452033135337a202a4fc2dbf8b63c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/319195
Reviewed-by: Sean McAllister <smcallis@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Added --standalone_manifest to repo tool. If set, the
manifest is downloaded directly from the appropriate source
(currently, we only support GS) and used instead of creating
a manifest git checkout. The manifests.git repo is still created to
keep track of various config but is marked as being for a standalone
manifest so that the repo tool doesn't try to run networked git
commands in it.
BUG=b:192664812
TEST=existing tests (no coverage), manual runs
Change-Id: I84378cbc7f8e515eabeccdde9665efc8cd2a9d21
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/312942
Tested-by: Jack Neus <jackneus@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Fixed: "we need to make a special case for logging the argv; it
should probably be a "data-json" event so that we log this directly as
an array rather than an encoded string.
Tested:
$ repo_dev sync
Verified event logged for argv is "data-json".
$./run_tests
Bug: [google internal] b/201102002
Change-Id: I18ccec79c73c8dc931cb8afc472b2361db8aea4c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/319055
Reviewed-by: Josh Steadmon <steadmon@google.com>
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
Tested:
$ ./run_tests
Verified that a manifest that specified superproject revision would use
the specified revision, and superproject will use the default revision.
Note that this is a slight behavior change from earlier repo versions,
which would always use the branch name of the manifest itself. However,
the new behavior would be more consisitent with regular "project"
element and would allow superproject be used even if it is not enabled
for the particular manifest branch, so we have decided to make the
change as it would provide more flexibility and better matches what
other elements would do.
Bug: [google internal] b/187868160
Change-Id: I35255ee347aff6e65179f7879d52931f168b477e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/317643
Tested-by: Xin Li <delphij@google.com>
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Stop tracking Ubuntu Trusty & Xenial and Debian Jessie & Stretch
as they only had Python 3.5 available which we've dropped.
Backfill OpenSSH versions since we've started testing for it.
Change-Id: I03183ed97f6e43dce8a00e36cce2956544a26afc
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/318835
Reviewed-by: Jack Neus <jackneus@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Symptom: repo sync exception
Root Cause: os.rename only works when source and destination are on the same file system
Solution: using shutil.move
to save disk usage, I create links for projects and project-objects, link to folder on another disk
lrwxrwxrwx 1 owenwen owenwen 47 Jun 9 16:40 project-objects -> /disk3/AndroidLocalRepos/.repo/project-objects/
lrwxrwxrwx 1 owenwen owenwen 40 Jun 9 16:40 projects -> /disk3/AndroidLocalRepos/.repo/projects/
below are exception I met:
"""
Traceback (most recent call last):
File "/usr/lib/python3.6/multiprocessing/pool.py", line 119, in worker
result = (True, func(*args, **kwds))
File "/usr/lib/python3.6/multiprocessing/pool.py", line 44, in mapstar
return list(map(*args))
File "/disk2/Android11/.repo/repo/subcmds/sync.py", line 550, in _CheckoutOne
project.Sync_LocalHalf(syncbuf, force_sync=force_sync)
File "/disk2/Android11/.repo/repo/project.py", line 1251, in Sync_LocalHalf
self._InitWorkTree(force_sync=force_sync, submodules=submodules)
File "/disk2/Android11/.repo/repo/project.py", line 2801, in _InitWorkTree
self._CheckDirReference(self.gitdir, dotgit, share_refs=True)
File "/disk2/Android11/.repo/repo/project.py", line 2674, in _CheckDirReference
platform_utils.rename(dst_path, src_path)
File "/disk2/Android11/.repo/repo/platform_utils.py", line 127, in rename
os.rename(src, dst)
OSError: [Errno 18] Invalid cross-device link: '/disk2/Android11/system/libhidl/.git/packed-refs' -> '/disk2/Android11/.repo/projects/system/libhidl.git/packed-refs'
"""
Change-Id: Ifda2f16530cc5a8f280169f482ee858f9e5241d3
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/316002
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Currently, repo will fail to sync to a manifest if the definition
of the repo-hooks project comes after the repo-hooks element.
BUG=none
TEST=new test, run_tests
Change-Id: I0bf85625173492af6c6404d4b67543e96e670562
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/318520
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Jack Neus <jackneus@google.com>
To avoid noise due to the passage of time, don't regenerate man pages
if the only thing different is the datestamp in the header.
Change-Id: Ic8d7b08d12e59c66994c0cc2d4ec2d2ed3eb6e6d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/318575
Reviewed-by: Jack Neus <jackneus@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Our internal experiments was a success so far and we are enrolling 100%
users now. Instead of asking every two weeks, simply consider a lack of
unexpired choice as accepting the system default.
With this change the user would still be able to override the system
default with --no-use-superproject, or to permanently set the choice in
user's profile with git config --global repo.superprojectchoice.
Bug: [google internal] b/190688390
Change-Id: Idc77a9cbf88a169d90304169e91f0d722dc4ac8b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/317975
Tested-by: Xin Li <delphij@google.com>
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Saved superproject's remote URL in _remote_url data and used it
in the _Fecth function.
Tested:
$ ./run_tests
$ flake8 git_superproject.py
$ repo_dev init --use-superproject -u https://android.googlesource.com/platform/manifest
$ repo_dev sync
Verified the all log messages have the following format.
repo superproject branch: <branch> url: <url> warning: <message>
Bug: [google internal] b/200072098
Change-Id: Iac6af7c99225479fd50bc6909396b22e0ce5f76b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/318177
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
git_trace2_event_log.py:
+ Added LogDataConfigEvents method to log 'data' events.
Sync's current_sync_state and previous_sync_state are logged
as 'data' events in the current log.
It logs are key/value in the |config| argument. Each key is
prefixed with |prefix| argument.
The following are sample events that are logged during repo sync.
{"event":"data",
"sid":"repo-20210914T181545Z-P000330c0/repo-20210914T181545Z-P000330c0",
"thread":"MainThread",
"time":"2021-09-14T18:16:19.935846Z",
"key":"previous_sync_state/repo.syncstate.main.synctime",
"value":"2021-09-14T17:27:11.573717Z"}
{"event":"data",
"sid":"repo-20210914T181545Z-P000330c0/repo-20210914T181545Z-P000330c0",
"thread":"MainThread",
"time":"2021-09-14T18:16:19.955546Z",
"key":"current_sync_state/repo.syncstate.main.synctime",
"value":"2021-09-14T18:16:19.935979Z"}
tests/test_git_trace2_event_log.py:
+ Added unit tests
sync.py:
+ Changed logging calls to LogDataConfigEvents.
Tested:
$ ./run_tests
Tested it by running the following command multiple times.
$ repo_dev sync -j 20
repo sync has finished successfully
Verified config data is looged in trace2 event logs.
Bug: [google internal] b/199758376
Change-Id: I75fd830e90c1811ec28510538c99a2632b104e85
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/317823
Reviewed-by: Josh Steadmon <steadmon@google.com>
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
Currently the code would give a message that would appear like the user
have enrolled the experiment regardless of the actual choice. For users
who choose to not enroll in the experiment, we should give them
instructions to override (enable) superproject once instead of how to
disable it, which is what the code already behave.
Bug: [google internal] b/199167992
Change-Id: Iba3314cb510aedf024375a26baa8bc1d5e2846cf
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/317382
Tested-by: Xin Li <delphij@google.com>
Reviewed-by: Raman Tenneti <rtenneti@google.com>
* Add footer to the version table, so easier to read and maintain.
* Add version entry for Ubuntu 21.04 Hirsute (non-LTS).
* Add version entry for Debian 11 Bullseye (LTS).
Change-Id: Ic72f911e616b1a13901e56074004f05cdc2c7633
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/313322
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: Xin Li <delphij@google.com>
1) If the manifest has superproject tag (git_master, etc), then
display error/warning messages (as it is doing today)
2) If the manifest doesn't have superproject tag (nest, chromeos
manifests), then don't display any error/warning messages about
superrproject (behave as though user has specified
--no-use-superproject).
3) Print error/warning messages if --use-superproject passed as
argument to repo sync.
4) No change in behavior for the repo init command.
git_superproject.py:
+ Fixed typo in _WriteManifestFile method name
+ Superproject accepts print_message as an argument and it defaults
to True. All messages that are printed to stderr are controlled by
this flag. If it is True, then messages get printed.
+ Added PrintMessages function which return true if either
--use-superproject is specified on the command line or if the
manifest has a superproject tag.
sync.py:
+ Displays the warning message if PrintMessgages are enabled and
passes that as argument to superproject object.
+ Added 'hassuperprojecttag' trace2 log entry for analysis. We can
find users/branches that are using superproject, but the manifest is
missing the superproject tag.
Tested:
$ ./run_tests
+ Verified printing of messages with and without superproject tag, with
with --use-superproject option.
+ aosp-master
$ repo_dev init --use-superproject -u https://android.googlesource.com/platform/manifest
$ repo_dev sync
+ A manifest without superproject tag.
$ repo_dev init -m $(pwd)/manifest_7482982.xml
$ repo_dev sync -n -c -j32 -m $(pwd)/manifest_7482982.xml
Bug: [google internal] b/196411099
Change-Id: I92166dcad15a4129fab82edcf869e7c8db3efd4b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/314982
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
The current help output might change based on the number of CPU cores
available (since it reflects the dynamic --jobs logic). This is good
for users running repo locally, but not good for shipping static man
pages. Hook the help output to have it generate the same output all
the time.
Change-Id: I3098ceddc0ad914b0b8e3b25d660b5a264cb41ee
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/312882
Reviewed-by: Roger Shimizu <rosh@debian.org>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
GitConfig doesn't save keys if the keys contain "_" characters. Some
of the options like mp_update, use_superproject have underscores.
This fixes issue with previous_sync_state missing some of the options.
Tested:
$ ./run_tests
$ repo_dev init --use-superproject -u https://android.googlesource.com/platform/manifest
Tested it by running the sync command multiple times and verifing
previous_sync_state and current_sync_state have the same keys.
$ repo_dev sync -j 20
repo sync has finished successfully
Verified config file has [syncstate ...] data saved.
Bug: [google internal] b/188573450
Change-Id: I16b52a164f9dd1633d7dad1d8cf6b151c629fcb1
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/313242
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
git_config.py:
+ Added SyncAnalysisState class, which saves the following data
into the config object.
++ sys.argv, options, superproject's logging data.
++ repo.*, branch.* and remote.* parameters from config object.
++ current time as synctime.
++ Version number of the object.
+ All the keys for the above data are prepended with 'repo.syncstate.'
+ Added GetSyncAnalysisStateData and UpdateSyncAnalysisState methods
to GitConfig object to save/get the above data.
git_trace2_event_log.py:
+ Added LogConfigEvents method with code from DefParamRepoEvents
to log events.
sync.py:
+ superproject_logging_data is a dictionary that collects all the
superproject data that is to be logged as trace2 event.
+ Sync at the end logs the previously saved syncstate.* parameters
as previous_sync_state. Then it calls config's UpdateSyncAnalysisState
to save and log all the current options, superproject logged data.
docs/internal-fs-layout.md:
+ Added doc string explaining [repo.syncstate ...] sections of
.repo/manifests.git/config file.
test_git_config.py:
+ Added unit test for the new methods of GitConfig object.
Tested:
$ ./run_tests
$ repo_dev init --use-superproject -u https://android.googlesource.com/platform/manifest
Tested it by running the following command multiple times.
$ repo_dev sync -j 20
repo sync has finished successfully
Verified config file has [syncstate ...] data saved.
Bug: [google internal] b/188573450
Change-Id: I1f914ce50f3382111b72940ca56de7c41b53d460
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/313123
Tested-by: Raman Tenneti <rtenneti@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Xin Li <delphij@google.com>
Skip updating the superproject when -l is present and use the existing
superproject, if available (this would make sync -l work as it's
intended to do), and fall back to sync without superproject when not
(this would catch the case when superproject is enabled by automatic
rollout).
Tested:
$ repo sync -j 20 -n
NOTICE: --use-superproject is in beta; report any issues to the address described in `repo version`
/usr/local/google/home/rtenneti/work/android/src/aosp/.repo/exp-superproject/925043f706ba64db713e9bf3b55987e2-superproject.git: Initial setup for superproject completed.
Fetching: 100% (1032/1032), done in 41.184s
...
$ repo_dev sync -j 20 -l
prebuilts/asuite/: discarding 1 commits
prebuilts/runtime/: discarding 1 commits
...
repo sync has finished successfully.
+ With superproject-override.xml and test it.
$ ls -l .repo/exp-superproject/
total 176
drwxr-xr-x 7 rtenneti primarygroup 4096 Jul 27 14:10 925043f706ba64db713e9bf3b55987e2-superproject.git
-rw-r--r-- 1 rtenneti primarygroup 172742 Jul 27 14:10 superproject_override.xml
rtenneti@rtenneti:~/work/android/src/aosp$ repo_dev sync -j 20 -l
...
repo sync has finished successfully.
+ Rename the file superproject-override.xml and test it.
$ ls -l .repo/exp-superproject/
total 176
drwxr-xr-x 7 rtenneti primarygroup 4096 Jul 27 14:10 925043f706ba64db713e9bf3b55987e2-superproject.git
-rw-r--r-- 1 rtenneti primarygroup 172742 Jul 27 14:10 temp.xml
$ repo_dev sync -j 20 -l
Checking out: 1% (12/1031) platform/external/rust/crates/fallible-streaming-iteexternal/linux-kselftest/: discarding 1 commits
prebuilts/remoteexecution-client/: discarding 1 commits
Checking out: 51% (536/1031) platform/prebuilts/gcc/darwin-x86/aarch64/....
....
Checking out: 100% (1031/1031), done in 5.478s
repo sync has finished successfully.
Bug: [google internal] b/184368268
Change-Id: I3aba5872e4f7c299977b92c2a39847ef28698c5a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/312962
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
Simple API to make it easy to find the top of the repo client checkout
for users. This mirrors the `git rev-parse --show-toplevel` API.
Change-Id: I0c3f98def089d0fc9ebcfa50aa3dc02091c1c273
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/312909
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Currently we have the behavior:
* `repo`: Equivalent to `repo help` -- only shows common subcommands
(with short description), and then exits 0.
* `repo --help`: Shows repo's core options, lists all commands (no
specific info), and then exits 0.
The first case is not behaving well:
* If you run `repo` without a specific subcommand, that's an error,
so we should be exiting 1 instead.
* Showing only subcommands and no actual option summary makes it seem
like repo itself doesn't take any options. This confuses users.
Let's rework things a bit. Now we have the behavior:
* `repo`: Shows repo's core options, lists all commands (no specific
info), and then exits 1.
* `repo --help`: Shows repo's core options, shows common subcommands
(with short description), and then exits 0.
* `repo --help-all`: Shows repo's core options, shows all subcommands
(with short description), and then exits 0.
Basically we swap the behavior of `repo` and `repo --help`, and fix
the exit status when the subcommand is missing.
The addition of --help-all is mostly for the man pages. We were
relying on `repo help --all` to generate the repo(1) man page, but
that too omitted the core repo options. Now the man page includes
all the core repo options and provides a summary of all commands.
Change-Id: I1f99b99d5b8af2591f96a078d0647a3d76d6b0fc
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/312908
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
We don't really care what the subcommand is set to when --version
output is requested, so stop enforcing it. This fixes some weird
behavior like `repo --version version` fails, but `repo --version
help` works.
The new logic skips subcommand validation, so `repo --version asdf`
will still display the version output. This matches git behavior,
and makes a bit of sense when we consider that the user really wants
to see the tool version, and probably doesn't care about anything
else on the command line.
Change-Id: I87454d473c2c8869344b3888a7affaa2e03f5b0f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/312907
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The _ParseArgs method parses the arguments and processes some of
the options, with the rest left to the _Run method. Simplify the
_ParseArgs method to only parse arguments and have _Run handle all
actual processing.
This will make it easier to add more terminal options (ones that
exit immediately without a subcommand), and makes it easier to
understand the overall code flow.
Change-Id: I47f7274c3f2b59378fd479e403e70fb24b681536
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/312906
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
