This fixes these errors:
...
File ".repo/repo/project.py", line 2371, in _ReferenceGitDir
os.symlink(os.path.relpath(src, os.path.dirname(dst)), dst)
OSError: [Errno 17] File exists
Which was happening for checkouts that were created before v1.12.8, when
project-objects was created. Nothing had yet been forcing these
checkouts to use project-objects, until the recent verification changes.
In this OSError case, we already created the symlink, so src == dst, and
the directory did not exist. This caused us to run os.makedirs the
os.symlink on the same file.
dst really should be the file in gitdir, not the target of that symlink
if it exists. So just use realpath for the dotgit portion of the path.
Change-Id: Iff5396a2093de91029c42cf38aa57131fd22981c
Enable operating against groups of repositories. As it stands, it isn't
compatible with `-r/--regex`.
`repo forall -g groupname -c pwd` will run `pwd` for all projects in
groupname.
`repo forall -g thisgroup,-butnotthisone -c pwd` will run `pwd` for all
projects in `thisgroup` but not `butnotthisone`.
`repo list -g groupname -n` will list all the names of repos in
`groupname`.
Change-Id: Ia75c50ce52541d1c8cea2874b20a4db2e0e54960
In some cases, a user may wish to continue with a sync even though
it would require overwriting an existing git directory. This behavior
is not safe as a default because it could result in the loss of some
user data, but as an optional flag it allows the user more flexibility.
To support this, add a --force-sync flag to the sync command that will
attempt to overwrite the existing git dir if it is specified and the
existing git dir points to the wrong obj dir.
Change-Id: Ieddda8ad54e264a1eb4a9d54881dd6ebc8a03833
repo info will crash when using a manifest with no default element despite
default being an optional element. Output nothing for "Manifest Branch" if no
default element exists (or if no default revision exists).
Change-Id: I7ebffa2408863837ba980f0ab6e593134400aea9
If _InitGitDir fails, it leaves any progress it had made on the file
system. This can cause subsequent calls to repo sync to behave
differently. This is especially evident when _CheckDirReference() fails,
since it will not be invoked when sync is retried because both the
source and destination directories already exist.
To address this, have _InitGitDir() clean up any directories it has created
if it catches an exception. Also behave the same way for _InitWorkTree().
Change-Id: Ic16bb3feea649e115b59bd44be294e89e3692aeb
For some users it is not desirable to remove refs that don't exist
on the remote server when syncing a mirror repo.
This reverts commit b4d43b9f66.
Change-Id: Ie849b66682138ef88da6cd1a5fbb27e993197dd7
The fetch logic for the case where depth is set and revision is a
SHA1 has several failure modes that are not handled well by the
current logic.
1) 'git fetch <SHA1>' requires git version >= 1.8.3
2) 'git fetch <SHA1>' can be prevented by a configuration option on the server.
3) 'git fetch --depth=<N> <refspec>' can fail to contain a SHA1 specified by
the manifest.
Each of these cases cause infinite recursion when _RemoteFetch() tries to call
itself with current_branch_only=False because current_branch_only is set to
True when depth != None.
To try to prevent the infinite recursion, we set self.clone_depth to None
before the first retry of _RemoteFetch(). This will allow the Fetch to
eventually succeed in the case where clone-depth is specified in the manifest.
A user specified depth from the init command will still recurse infinitely.
In addition, never try to fetch a SHA1 directly if the git version being used
is not at least 1.8.3.
Change-Id: I802fc17878c0929cfd63fff611633c1d3b54ecd3
* changes:
forall: use smart sync override manifest if it exists
sync: Remove smart sync override manifest when not in smart sync mode
forall: Don't try to get lrev of projects in mirror workspace
sync: Improve error message when writing smart sync manifest fails
Previously, in running the `manifest` command, we wouldn't output the
upstream if the default upstream would include the pinned sha1.
However, now that fetching refs/heads/* doesn't guarantee that we will
have the sha1, we need to always output the specified upstream branch.
Change-Id: Ib8b409a8ecd439397b38ee9649c530407797f841
If a workspace is synced with the -s or -t option, the included projects
may be different to those in the original manifest. However, when using
the forall command, the list of the projects from the original manifest
is used.
If the smart sync manifest file exists, use it to override the original
manifest.
Change-Id: Iaefcbe148d2158ac046f158d98bbd8b5a5378ce7
When syncing with the -s or -t option, a smart_sync_override.xml file
is created. This file is left in the file system when syncing again
without the -s or -t option.
Remove the smart sync override manifest, if it exists, when not using
the -s or -t option.
Change-Id: I697a0f6405205ba5f84a4d470becf7cd23c07b4b
git rev-parse fails for projects that don't have an explicit revision
specified, and don't have a branch of the same name as the default
revision. This can be the case in a workspace synced with the smart
sync (-s) or smart tag (-t) option.
Change-Id: I19bfe9fe7396170379415d85f10f6440dc6ea08f
The error message only states that writing the manifest failed.
Include the exception message, so it's easier to track down the reason
that the write failed.
Change-Id: I06e942c48a19521ba45292199519dd0a8bdb1de7
After performing the actual cherry-pick operation, the code
in cherry_pick.py opens a pipe to 'git commit -F' to rewrite the commit
message, emits the fixed-up commit msg to the pipe, then waits
for 'git commit' to complete. The child 'git' process winds up
hanging while reading from the pipe, however, since the parent
process still has it open. To fix the hang, change the parent process
to close its end of the pipe after it has emitted the message.
Change-Id: I5929371e69a5b076f09009d00d40a2c72ac8ac33
output from a process is in bytes in python3. we need
to decode it.
in Python3, bytes don't have an encode attribute. use this
to identify it.
Change-Id: I152f2ec34614131027db680ead98b53f9b321ed5
This allows a project to use globs in the linkfile src attribute. When
a glob is used in the src the dest field must be a directory. Then
_LinkFile._Link(self) calls will create symbolic links in the dest
directory to all of the entries in the src as defined by the glob
specification.
Below all of the entries in master-configs/ will have symbolic links
in <root dir>/configs directory:
<project name="helloworld.git" path="apps/helloworld">
<linkfile src="master-configs/*" dest="configs"/>
</project>
Change-Id: Idfed8fa47c83d2ca6e2b8e867731b8e2f9e2eb47
The source (target) of the symlink is specified relative to a project
within a tree, and the destination is specified relative to the top
of the tree, so it should always be possible to create a relative symlink
to the target file. Relative symlinks will allow moving an entire tree
without breaking the symlink, and copying a tree (with -p) without leaving
a symlink to the old tree.
Change-Id: I16492a8b59a137d2abe43ca78e3b212e2c835599
Pressing ctrl-c during repo sync often hangs for 30 to 45 seconds
due to the time.sleep and retry in _RemoteFetch. If git exits with
a signal, for example -2 for SIGINT triggered by ctrl-c, skip the
sleep and retry.
Change-Id: I32da12c2dcc96d9cc0b12a066e824b12ebfb52a0
If the generator that produces per-project worker arguments raises an
exception it triggers python bug http://bugs.python.org/issue8296.
Rewrite the generator expression as a generator function, and catch
Exceptions and KeyboardInterrupts to end the iteration.
Also add a pool worker initializer to disable SIGINT to prevent
KeyboardInterrupts inside multiprocessing.Pool in the worker threads
causing the same problem.
Fixes easy-to-reproduce hangs when hitting ctrl-c during
repo forall -c echo
Change-Id: Ie4a65b3e1e07a64ed6bb6ff20f3912c4326718ca
There are a set of cases that can cause the git directory in
.repo/projects to point to a directory in .repo/project-objects that
is not the one specified in the manifest. This results in a tree that
is not sane, and so should cause a failure.
In order to reproduce the failure case:
1) Sync to any manifest
2) Change the 'name' of a project to a different repository. Leave the
'path' the same.
3) Resync the modified project. The project-objects directory will not
be created, and the projects directory will remain pointed at the old
project-objects.
Change-Id: Ie6711b1c773508850c5c9f748a27ff72d65e2bf2
In 2fb6466f79 an optimisation was
added to avoid fetching from remotes if the project is fixed to
a revision and the revision is already available locally.
This causes problems for users who expect all objects to be
fetched by default.
Change the logic so that the optimized behaviour is only enabled if
an option is explicitly given to repo sync.
Change-Id: I3b2794ddd8e0071b1787e166463cd8347ca9e24f
When syncing a mirror repo, add the --prune option to the fetch
command to force removal of stale refs from the mirror.
Change-Id: I4b43b2a5c86b9915627887c16f6569066f3ab978
Previously, we used a regex that would only remove a phony string from
a url if it existed, but we recently replaced that with a slice. This
change goes back to the previous behavior.
Change-Id: I8baf527be01c4b49d45b903b31a1cd6315563d5b
Appending the branch to the fetch spec causes sync of a mirror to
fail for projects that don't have an explicit revision specified,
and don't have a branch of the same name as the default revision.
For example, a manifest defining a default revision:
<default revision="master">
having a project without an explicit revision:
<project name="path/to/project">
and not having a branch named "master", will cause repo sync to
fail for that project with the error:
Couldn't find remote ref refs/heads/master
Modify the logic to not append the branch onto the fetch spec when
syncing to a mirror.
Change-Id: I5c4457bd125519abf27abe682dea62ad708978c9
Before, a list was generated, which is why there was a massive delay.
Using a generator will allow processes to start straight away
Change-Id: Ia325b0b340cc328c08c9bcc92a6709bbdaf6a664
buflist was being used, which isn't available in Python 3.
`Execute` was using StringIO to capture the output of `PrintWorkTreeStatus`,
only to redirect it straight to stdout.
Instead, just let `PrintWorkTreeStatus` do it's own thing directly to stdout.
for handling `_FindOrphans`, we swap StringIO for a list. Nothing was done
that needed a a file like object.
Change-Id: Ibdaae137904de66a5ffb590d84203ef0fe782d8b
When running repo branch, the git merge line (in many circumstances)
is set to the revision of the project specified in the manifest. If
this is a branch name that is not fully-qualified, we will end up with
something like "merge = master" instead of "merge = refs/heads/master".
This change examines the revision if we are going to use that and
changes branch short names to fully qualified branch names.
Change-Id: Ie1be94fb8d45df8eeac44a47f729a3819a05fa81
Instead of using regex, append the netloc and relative
scheme lists with the custom scheme.
The schemes will only be appended when needed, instead
of passing X amount of regex replaces.
see http://bugs.python.org/issue18828 for more details.
Change-Id: I10d26d5ddc32e7ed04c5a412bdd6e13ec59eb70f
