This reverts commit 07d21e6bde.
Reason for revert: crbug.com/gerrit/16230, b/244467766 - breaks aosp-master-with-phones case
Change-Id: Id967d92f8622c2c13356b09e46ece9f20040aabc
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/344314
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Xin Li <delphij@google.com>
If initializing the manifest fails for any reason, don't leave it in
a half complete state. This can cause problems if/when the user tries
to reinit because different codepaths will be taken. For example, if
we initialize manifests.git and don't finish probing the remote to see
what default branch it uses, we end up always using "master" even if
that isn't what the remote uses.
To avoid all of this, use .tmp dirs when initializing, and rename to
the final path only after we complete all the right steps.
We should roll this out to all projects we clone, but start with the
manifest project for now.
Bug: https://crbug.com/gerrit/13526
Bug: https://crbug.com/gerrit/15805
Change-Id: I0214338de69ee11e090285c6b0b211052804af06
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/343539
Reviewed-by: LaMont Jones <lamontjones@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Normally git produces no output when creating or switching branches.
If there's a problem though, we want to show that to the user. So
switch from capturing all output to running in quiet mode.
Bug: https://crbug.com/gerrit/15819
Change-Id: I7873ecc7c3bacce591899cc9471cb0244eb74541
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/343454
Reviewed-by: LaMont Jones <lamontjones@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
We almost always use self.remote.name when calling self.GetRemote,
so make that the default to simplify the code a bit.
Change-Id: Ifdf6e1370d6b8963b44e6d384b0fac8fa5c4f2ba
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/343184
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: LaMont Jones <lamontjones@google.com>
The `--wip` allow to bulk push changed as work-in-progress. This CL
intend to allow the opposite opperation by removing the wip mark on the
CL and set it to be ready to review
Change-Id: If0743c5b14829f77be2def5a8547060d06a5648c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/342214
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: William Escande <wescande@google.com>
Display the project path relative to the outermost manifest by default,
and relative to the sub manifest only when --this-manifest-only is
specified.
For project-related diagnostic messages, use the outermost manifest for
messages.
Change-Id: I4537d7dd412a2c182e77d6720e95c1b0ef70eb0e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/340754
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
This option will suppress the
Uncommitted changes in ... (did you forget to amend?)
prompt when there are untracked (unknown) files in the working copy.
The prompt is still shown if tracked files are modified.
Change-Id: Ia3fcc82989b7fad09b69214eda31e2d0dfc14600
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/340456
Tested-by: Martin Geisler <mgeisler@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
If the user says `--no-use-superproject`, then do not bother syncing the
superproject.
Also add/update docstrings and comments throughout.
Change-Id: I9cdad706130501bab9a22d3099a1dae605e9c194
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/338975
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
With this change, partial syncs (sync with a project list) are again
supported.
If the updated manifest includes new sub manifests, download them
inheriting options from the parent manifestProject.
Change-Id: Id952f85df2e26d34e38b251973be26434443ff56
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334819
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
For now, this is opt-in via environment variables:
- export REPO_USE_ALTERNATES=1
The shared project logic that shares the internal .git/objects/ dir
directly between multiple projects via the project-objects/ tree has
a lot of KI with random corruption. It all boils down to projects
sharing objects/ but not refs/. Git operations that use refs to see
what objects are reachable and discard the rest can easily discard
objects that are used by other projects.
Consider this project layout:
<show fs layout>
There are unique refs in each of these trees that are not visible in
the others. This means it's not safe to run basic operations like
git prune or git gc.
Since we can't share refs (each project needs to have unique refs
like HEAD in order to function), let's change how we share objects.
The old way involved symlinking .git/objects/ to the project-objects
tree. The new way shares objects using git's info/alternates.
This means project-objects/ will only contain objects that exist in
the remote project. Local per-project objects (like when creating
branches and making changes) will never be shared. When running a
prune or gc operation in the per-project state, it will only ever
repack or discard those per-project objects. The common shared
objects would only be cleaned up when running a common operation
(i.e. by repo itself).
One downside to this for users is if they try blending unrelated
upstream projects. For example, in CrOS we have multiple kernel
projects (for diff versions) checked out. If a dev fetched the
upstream Linus tree into one of them, the objects & tags would
not be shared with the others, so they would have to fetch the
upstream state for each project. Annoying, but better than the
current corruption situation we're in now.
Also if the dev runs a manual `git fetch` in the per-project to
sync it up to newer state than the last `repo sync` they ran,
the objects would get duplicated. However, git operations later
on should eventually dedupe this.
Bug: https://crbug.com/gerrit/15553
Change-Id: I313a9b8962f9d439ef98ac0ed37ecfb9e0b3864e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/328101
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
This way we know we don't need to encode the labels.
Change-Id: Ib83ed8f4ed05f00b9d2d06a9dd3f304e4443430e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/337518
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: LaMont Jones <lamontjones@google.com>
If init was run with --use-superproject, init failed.
If init was run without --{no,}use-superproject option then manifests
with <superproject/> elements were mishandled.
Bug: b/233226285
Test: manual
Change-Id: I737e71c89d2d7c324114f58bf2dc82b40e5beba7
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/337534
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
When the user does not specify any manifest groups, this allows the
parent manifest to indicate which manifest groups should be used for
syncing the submanifest.
Change-Id: I88806ed35013d13dd2ab3cd245fcd4f9061112c4
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/335474
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
When a manifest file is overridden, remember that and keep using the
override for the remainder of the process. If we need to revert it,
make the override name evaluate False.
Change-Id: I1eee05fec6988c1ee4a3c751c4b540d5b5d11797
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/335136
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
And fix most of the other attributes to return the value instead of
None.
Change-Id: Iddcbbeb56238ee082bb1cae30adbd27a2f551f3d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/335134
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Reviewed-by: Xin Li <delphij@google.com>
Always create Superproject when there is a <superproject> tag, and have
it hold the XML content, similar to how other manifest elements are
handled.
This also adds SetQuiet and SetPrintMessages to Superproject
consistent with manifest.SetUseLocalManifests.
Change-Id: I522bf3da542006575799f0640c67f7052704f266
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334641
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
- do not call the internal method from subcmds/sync.py.
- use the correct default groups for submanifests.
- only sync the superproject when we are told to.
Change-Id: I81e4025058f1ee564732b9e17aecc522f6b5f626
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334639
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
Also fixes some typos
Change-Id: Id2ba5834ba3a74ed3f29c36d2c0030737dc63e35
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334579
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
This moves more of the manifest project handling into ManifestProject.
Change-Id: Iecdafbec18cccdfd8e625753c3bd1bcddf2b227f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334520
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Use ManifestProject properties for config values.
Change-Id: Ib4ad90b0d9a089916e35615b8058942e6d01dc04
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334519
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Move the logic to sync a ManifestProject out of subcmds/init.py
Change-Id: Ia9d00f3da1dc3c5dada84c4d19cf9802c2346cb0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334140
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Create RepoProject and ManifestProject, inheriting from MetaProject,
with methods separated for isolation and clarity.
Change-Id: Ic1d6efc65c99470290fea612e2abaf8670d199f4
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334139
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
To be addressed in another change:
- a partial `repo sync` (with a list of projects/paths to sync)
requires `--this-tree-only`.
Change-Id: I6c7400bf001540e9d7694fa70934f8f204cb5f57
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/322657
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
If submodules is False, explicitly pass '=no'. Uninitialized submodules
may cause the default option to fail.
Change-Id: Ia00bcba5b69c4b65195f4c469c686a3ef9a4a3ad
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/330159
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
This is just a log file that, while useful for humans when gc aborts,
doesn't contain any data, so it's safe to throw away.
Bug: https://crbug.com/gerrit/15619
Change-Id: Ia95e0e281f52260668f7a80b5d5f990e32a8597a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/328999
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
It was reported that git-lfs did not work with git-repo. Specifically,
`git read-tree -u` run by `repo sync` would fail git-lfs's smudge
filter. See https://github.com/github/git-lfs/issues/1422.
In fact, by the time `git read-tree -u` is run, the repository is not
bare. It is just that, the working directory is not the same as the
.git directory. git-lfs's filter should work. No one seems to have
delved into that issue.
Today, with newer versions of git-repo and git-lfs, that issue will
not reproduce. Tested with
- git 2.33, git-lfs 2.13 on macOS
- git 2.17, git-lfs 2.3 on ubuntu
So, it seems fine to add an option --enable-git-lfs-filter, default to
false, and stat that it may not work with older versions of git and
git-lfs in the help doc.
Bug: https://crbug.com/gerrit/14516
Change-Id: I8d21854eeeea541e072f63d6b10ad1253b1a9826
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/328359
Tested-by: XD Trol <milestonejxd@gmail.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Removing the sample hooks is just clean up, so if repo cannot remove a
sample hook that should not cause it to fail.
Change-Id: I716b977da091c22b8f53e134f4fbc114116f9a65
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/328635
Reviewed-by: Mike Frysinger <vapier@google.com>
In order to stop sharing objects/ directly between shared projects,
we have to fetch the remote objects into project-objects/ manually.
So instead of running git operations in the individual project dirs
and relying on .git/objects being symlinked to project-objects/,
tell git to store any objects it fetches in project-objects/.
We do this by leveraging the GIT_OBJECT_DIRECTORY override. This
has been in git forever, or at least since v1.7.2 which is what we
already hard require. This tells git to save new objects to the
specified path no matter where it's being run otherwise.
We still otherwise run git in the project-specific dir so that it
can find the right set of refs that it wants to compare against,
including local refs. For that reason, we also have to leverage
GIT_ALTERNATE_OBJECT_DIRECTORIES to tell git where to find objects
that are not in the upstream remote. This way git doesn't blow up
when it can't find objects only associated with local commits.
As it stands right now, the practical result is the same: since we
symlink the project objects/ dir to the project-objects/ tree, the
default objects dir, the one we set $GIT_OBJECT_DIRECTORY to, and
the one we set $GIT_ALTERNATE_OBJECT_DIRECTORIES to are actually
all the same. So this commit by itself should be safe. But in a
follow up commit, we can replace the symlink with a separate dir
and git will keep working.
Bug: https://crbug.com/gerrit/15553
Change-Id: Ie4e654aec3e1ee307eee925a54908a2db6a5869f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/328100
Reviewed-by: Jack Neus <jackneus@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When using --reference, the path is written to objects/info/alternates.
The path is accessed inconsistently -- sometimes through projects/ (via
self.gitdir) and sometimes through project-objects/ (via self.objdir).
This works because projects/.../objects is a symlink to the objects dir
under project-objects/. Change all accesses to go through self.objdir.
This will allow us to stop symlinking projects/.../objects without the
reference dir logic breaking. The projects/ path is going to use its
alternates file for its own needs.
Bug: https://crbug.com/gerrit/15553
Change-Id: I6b452ad1aaffec74ecb7ac1bb9baa3a3a52e076c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/328099
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jack Neus <jackneus@google.com>
These hooks are never used and often get stale, so just trim them.
Users rarely look in these dirs to begin with.
Change-Id: Ic785aa55fb7ec84a61376df101127d0018882030
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/327538
Reviewed-by: Jack Neus <jackneus@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Since we don't do this anymore, and there prob won't be a need to
bring it back, drop support for it.
Bug: https://crbug.com/gerrit/15460
Change-Id: I7d86706f108c797a5c7962cb1578693d49430367
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/327537
Reviewed-by: Jack Neus <jackneus@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Verify all the .git/ paths will be handled by the migration logic before
starting the migration. This way we still abort & log an error, but the
user gets to see it before we put the tree into a state that they have to
manually recover. Also add a few more known-safe-to-clobber paths.
Bug: https://crbug.com/gerrit/15273
Change-Id: If49d69b341bc960ddcafa30da333fb5ec7145b51
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/327557
Reviewed-by: Colin Cross <ccross@android.com>
Tested-by: Mike Frysinger <vapier@google.com>
Unsharing this directory shouldn't be a problem. The current repo code
treated it as a file, and while that's actually incorrect, files & dirs
are basically treated the same, so it's practically the same.
Let's enumerate each subpath since there aren't that many.
info/refs:
Only used when the project is exported over git dumb transports (i.e.
a http:// server). Repo never does this, and it's extremely unlikely
any user has ever done this. Plus, this proposal talks about unsharing
project refs, so this file should get unshared too.
info/grafts:
A user-configurable file that repo never touches. Might be useful to
share across projects, but probably rarely (if ever) used by developers,
and forcing them to configure it for each project isn't that big of a
deal.
info/exclude:
info/attributes:
User-configurable files that repo never touches. Doesn't seem like
most users ever touch these, and if they do, having them do it for
each shared project isn't a big deal.
info/sparse-checkout:
Repo doesn't use sparse checkouts, and it's extremely unlikely to even
work if a user tried doing something themselves.
Bug: https://crbug.com/gerrit/15460
Change-Id: I53e44d73a6d7a92da615b46600d8ea51cb46e3ac
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/327519
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Nothing uses this path. It’s only for exporting git dirs e.g. for
online gitweb use which probably no one does. It is not the same
description file as exists on servers we cloned from. Leaving it
as the default plain text file will simplify code.
We don't undo any existing symlinks if they exist since repo does
not care about them, and their existence doesn't hurt.
Bug: https://crbug.com/gerrit/15460
Change-Id: Ic34fe7c3cfb8f6da844de5be30158f59382b1cc8
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/327518
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
This path only matters to users of `git svn` who manually run it in
local projects after they get a full repo client checkout. With svn
usage falling in general, and with the fact that the source checkout
now symlinks its .git/ state to the internal projects/ path, we don't
need to manage this anymore.
It means the path won't be shared among multiple local projects that
have the same remote, but so it goes. It was an optimization only,
not functionality required for correctness. We want to simplify the
internals to stop messing with git state, and this particular path
doesn't seem worth the effort to maintain.
We don't undo any existing svn symlinks if they exist since repo does
not care about them, and their existence doesn't hurt anything.
Bug: https://crbug.com/gerrit/15460
Change-Id: Ie8496b275bcc589771aa9f4ee874ed2ee6d5241d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/327517
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Now that we symlink worktree .git/ paths to .repo/projects/, we never
set share_refs=True anywhere, which means all of this logic is dead
code. Throw it all away. Do it as a separate commit to make the
parent commit easier to review.
Bug: https://crbug.com/gerrit/15273
Change-Id: If496d39029d3d3bd523ba24c603ce47a63ad9b51
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/326817
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jack Neus <jackneus@google.com>
Historically we created a .git/ subdir in each source checkout and
symlinked individual files to the .repo/projects/ paths. This layer
of indirection isn't actually needed: the .repo/projects/ paths are
guaranteed to only ever have a 1-to-1 mapping with the actual git
checkout. So we don't need to worry about having files in .git/ be
isolated.
To that end, change how we manage the actual project checkouts from
a dir full of symlinks (and a few files) to a symlink to the internal
.repo/projects/ dir. This makes the code simpler & faster.
The directory structure we have today is:
.repo/
project-objects/chromiumos/third_party/kernel.git/
<paths omitted as not relevant to this change>
projects/src/third_party/kernel/
v3.8.git/
config
description -> …/project-objects/…/config
FETCH_HEAD
HEAD
hooks/ -> …/project-objects/…/hooks/
info/ -> …/project-objects/…/info/
logs/
objects/ -> …/project-objects/…/objects/
packed-refs
refs/
rr-cache/ -> …/project-objects/…/rr-cache/
src/third_party/kernel/
v3.8/
.git/
config -> …/projects/…/v3.8.git/config
description -> …/project-objects/…/v3.8.git/description
HEAD
hooks/ -> …/project-objects/…/v3.8.git/hooks/
index
info/ -> …/project-objects/…/v3.8.git/info/
logs/ -> …/projects/…/v3.8.git/logs/
objects/ -> …/project-objects/…/v3.8.git/objects/
packed-refs -> …/projects/…/v3.8.git/packed-refs
refs/ -> …/projects/…/v3.8.git/refs/
rr-cache/ -> …/project-objects/…/v3.8.git/rr-cache/
The directory structure we have after this commit:
.repo/
<nothing changes>
src/third_party/kernel/
v3.8/
.git -> …/projects/…/v3.8.git
Bug: https://crbug.com/gerrit/15273
Change-Id: I9dd8def23fbfb2f4cb209a93f8b1b2b24002a444
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/323695
Reviewed-by: Mike Nichols <mikenichols@google.com>
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
repo sync only handles a git tag properly when it is in the "revision"
field. However, "revision locked manifests" (`repo manifest
--revision-as-HEAD`) specifies the tag in the "upstream" field. The
issue is that this tag is not fetched. Only the commit that the tag
points to is fetched. This cases issues as
self._CheckForImmutableRevision() runs and comes to the conclusion that
the tag was changed while in fact, it was just not fetched. This causes
a full sync.
File docs/manifest-format.md, section Element-project:
> Attribute upstream: Name of the Git ref in which a sha1 can be found.
Used when syncing a revision locked manifest in -c mode to avoid having
to sync the entire ref space. Project elements not setting their own
upstream will inherit this value.
Change-Id: I0507d3a5f30aee8920a9f820bafedb48dd5db554
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/323620
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Robin Schneider <ypid@riseup.net>
objdir is the .repo/project-objects/ dir based on the remote path.
gitdir is the .repo/projects/ dir based on the local source checkout
path. When we setup the gitdir, we symlink "hooks" to the one in the
objdir. But when we go to initialize the hooks, we do it via gitdir.
There is a 1-to-many mapping from project-objects to projects, so
initializing via gitdir can be repetitive. Collapse the hook init
logic to the objdir init path.
Change-Id: I828fca60ce6e125d6706c709cdb2797faa40aa50
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/323815
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When a hard revision ID is provided in a regular project tag then the
revisionId is updated as well if it is a commit hash. The difference
is that if the revisionExpr is a commit, git-repo needs to update
refs/remotes/m/master with update-ref not symbolic-ref, as the latter
must refer to another ref, not to a specific commit.
Change-Id: I215a62dabb30225e480ad2c731416d775fc0c750
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/310963
Tested-by: Michael Kelly <mkelly@arista.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
This allows us to move the repository to a new location in the source
tree without having to remove-project + add a new project tag.
Change-Id: I4dba6151842e57f6f2b8fe60cda260ecea68b7b4
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/310962
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Michael Kelly <mkelly@arista.com>
Some of the file removal calls are subject to race conditions (if
something else deletes the file), so extend our remove API to have
an option to ignore ENOENT errors. Then update a bunch of random
call sites to use this new functionality.
Change-Id: I31a9090e135452033135337a202a4fc2dbf8b63c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/319195
Reviewed-by: Sean McAllister <smcallis@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
For older git-repo versions, we might have only fetched the SHA1
revision that was provided by the project, but have remote branch left
intact as long as they exist. When the remote branch become stale,
some repo operations like rebase would fail, and repo sync would not
correct this situation.
Fix this by tightening the requirement to also require the superproject
provided SHA1 be an ancestor or equal to the tip-of-tree of the remote
branch.
Bug: [google internal] b/193798453
Change-Id: Ie34c5d860dabb1cbd9f822da929088ec69c79cf6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/312642
Tested-by: Xin Li <delphij@google.com>
Reviewed-by: Raman Tenneti <rtenneti@google.com>
It is possible that a clone bundle contained the object referenced by
the branch in the manifest and in the superproject, but not the branch
itself (for example, the branch may be newly created from an existing
branch, or is not vislble to the user downloading the clone bundle).
When --use-superproject is enabled, because we are overriding
revisionExpr with the SHA1 revision provided by the superproject, the
verification step would succeed, but because the expected branch do not
exist, it would confuse git-repo at a later time, as it is expecting the
remote branch to exist in the local clone.
In project.py, fix this by making SetRevisionId() to always remember
the actual branch name and verify it in _CheckForImmutableRevision()
so that we only skip the fetch step when both objects exists locally.
Bug: [google internal] b/191974277
Change-Id: I49d3ca0667f524c8c45f416492faf95b1dd822fb
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/310802
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Xin Li <delphij@google.com>
We always pass in output_redir when syncing, but that's the common case:
there are a few situations (like `repo init`) where we don't pass in a
buffer, and if any errors show up in that case, we'd crash. Rely on the
print function to handle this logic for us.
Bug: https://crbug.com/gerrit/14568
Change-Id: I8cd47e82329797ffc42534418a3dfbd8429205be
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/307222
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
We changed sync to use multiprocessing for parallel work. This broke
the ssh proxy code as it's all based on threads. Rewrite the logic to
be multiprocessing safe.
Now instead of the module acting as a stateful object, callers have to
instantiate a new ProxyManager class that holds all the state, an pass
that down to any users.
Bug: https://crbug.com/gerrit/12389
Change-Id: I4b1af116f7306b91e825d3c56fb4274c9b033562
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/305486
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
The only time we really need ssh proxies is when we want to run many
connections and reuse them. That only happens when running sync.
Every other command makes at most two connections, and even then it's
only one or none. So the effort of setting up & tearing down ssh
proxies isn't worth it most of the time.
The big reason we want to move this logic to sync is that it's now
using multiprocessing for parallel work. The current ssh proxy code
is all based on threads, which means none of the logic is working
correctly. The current ssh design makes it hard to fix when all of
the state lives in the global/module scope.
So the first step to fixing this is top move the setup & teardown to
the one place that really needs it: sync. No other commands will use
proxies anymore, just direct connections.
Bug: https://crbug.com/gerrit/12389
Change-Id: Ibd351acdec39a87562b3013637c5df4ea34e03c6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/305485
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When converting this logic from print() to the output buffer, this
error codepath should have dropped the use of the file= redirect.
Bug: https://crbug.com/gerrit/14482
Change-Id: Ib484924a2031ba3295c1c1a5b9a2d816b9912279
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/305142
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
While this provides a way to undo earlier command line options (e.g.
`repo sync --tags --no-tags`) which can be helpful for scripting &
automation, this more importantly allows the user to override the
manifest settings for syncing tags from a project.
Bug: https://crbug.com/gerrit/12401
Change-Id: Id4c36cd82e6ca7cb073b5d63a09f6c7ccdebba83
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/304904
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
For most commands, this is more about providing a way to undo earlier
command line options (e.g. `repo info -c --no-current-branch`) which
can be helpful for scripting & automation. But for the sync command,
this is helpful to undo the setting that exists in the manifest itself.
With this in place, tweak the sync current_branch_only logic to only
apply the manifest settings when the user hasn't specified a command
line option.
Bug: https://crbug.com/gerrit/12401
Change-Id: I21e2384624680cc740d1b5d1e49c50589d2fe6a0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/304903
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
We were updating the per-checkout m/ pseudo ref when syncing, but we
only created the common m/ redirect when initializing a project for
the first time. This is fine unless the user switches the manifest
branch in an existing project, then we never create that redirect.
Bug: https://crbug.com/gerrit/14468
Change-Id: I5325e7e602dcb4ce150bef258901ba5e9fdea461
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/304822
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When depth is used, we would fetch only SHA1 when superproject is
used, as the result, only the manifest branch is being recorded,
and commands like repo start would fail.
Fix this by saving the upstream branch value in the overlay
manifest and add the upstream branch to fetch list.
Bug: [google internal] b/185951360
Change-Id: Ib36f56067723f2572ed817785b31cc928ddfec0a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/304562
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Xin Li <delphij@google.com>
Default the partial_clone_exclude argument to an empty set.
Fixes the following report by Emil Medve.
With this change (up to v2.14.1), on an existing "normal" clone (without partial-clone options) I'm seeing this traceback during `repo selfupdate`:
Traceback (most recent call last):
File ".../.repo/repo/main.py", line 630, in <module>
_Main(sys.argv[1:])
File ".../.repo/repo/main.py", line 604, in _Main
result = run()
File ".../.repo/repo/main.py", line 597, in <lambda>
run = lambda: repo._Run(name, gopts, argv) or 0
File ".../.repo/repo/main.py", line 261, in _Run
result = cmd.Execute(copts, cargs)
File ".../.repo/repo/subcmds/selfupdate.py", line 54, in Execute
if not rp.Sync_NetworkHalf():
File ".../.repo/repo/project.py", line 1091, in Sync_NetworkHalf
if self.name in partial_clone_exclude:
TypeError: argument of type 'NoneType' is not iterable
$ ./run_tests -v
Change-Id: I71e744e4ef2a37b13aa9ba42eba3935e78c4e40a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/304082
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
Make sure we print a message whenever we retry so it's clear to the
user why repo is pausing for a long time, and why repo might have
passed even though it displayed some errors earlier.
Also unify the sleep logic so we don't have two independent methods.
This makes it easier to reason about.
Also don't sleep if we're in the last iteration of the for loop. It
doesn't make sense to and needlessly slows things down when there are
real errors.
Bug: https://crbug.com/gerrit/12494
Change-Id: Ifceace5b2dde75c2dac39ea5388527dd37376336
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/303402
Reviewed-by: Sam Saccone 🐐 <samccone@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
partial-clone-exclude option excludes projects during
partial clone. This is a comma-delimited project names
(from manifest.xml). This option is persisted and it
is used by the sync command.
A project that has been unparital'ed will remain unpartial if
that project's name is specified in the --partial-clone-exclude
option. The project name should match exactly.
Added
$ ./run_tests -v
Bug: [google internal] b/175712967
"I can't "unpartial" my androidx-main checkout"
$ rm -rf androidx-main/
$ mkdir androidx-main/
$ cd androidx-main/
$ repo_dev init -u https://android.googlesource.com/platform/manifest -b androidx-main --partial-clone --clone-filter=blob:limit=10M -m default.xml
$ repo_dev sync -c -j8
+ Verify a project is partial
$ cd frameworks/support/
$ git config -l | grep 'partial'
+ Unpartial a project.
$ /google/bin/releases/android/git_repack/git_unpartial
+ Verify project is unpartial
$ git config -l | grep 'partial'
$ cd ../..
+ Exclude the project from being unparial'ed after init and sync.
$ repo_dev init -u https://android.googlesource.com/platform/manifest -b androidx-main --partial-clone --clone-filter=blob:limit=10M --partial-clone-exclude="platform/frameworks/support,platform/frameworks/support-golden" -m default.xml
+ Verify project is unpartial
$ cd frameworks/support/
$ git config -l | grep 'partial'
$ cd ../..
$ repo_dev sync -c -j8
$ cd frameworks/support/
$ git config -l | grep 'partial'
$ cd ../..
+ Remove the project from exclude list and verify that project is partially cloned.
$ repo_dev init -u https://android.googlesource.com/platform/manifest -b androidx-main --partial-clone --clone-filter=blob:limit=10M --partial-clone-exclude= -m default.xml
$ repo_dev sync -c -j8
$ cd frameworks/support/
$ git config -l | grep 'partial'
Change-Id: Id5dba418eba1d3f54b54e826000406534c0ec196
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/303162
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
Re-allow checking out projects to the top of the repo client checkout.
We add checks to prevent checking out files under .repo/ as that path
is only managed by us, and projects cannot inject content or settings
into it.
Bug: https://crbug.com/gerrit/14156
Bug: https://crbug.com/gerrit/14200
Change-Id: Id6bf9e882f5be748442b2c35bbeaee3549410b25
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/299623
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
If the current project doesn't have any local branches, then there's
nothing to prune, so return right away. This avoids running a few
git commands when we aren't actually going to use the results, and
it avoids checking repository validity. Since we aren't going to do
anything in here, no need to check it.
Change-Id: Ie9d5c75a954e42807477299f3e5a63a92fac138b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/299742
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The recent commit 84230009ee ("project:
make diff tools synchronous") broke repo diff if it includes % formats.
Add an explicit format string to fix.
Bug: https://crbug.com/gerrit/14208
Change-Id: Ie255a43c5b767488616b2b3dd15abc18f93bfab2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/299402
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The clone bundle logic assumes there is a one-to-one mapping between the
projects/ and project-objects/ trees. When using shared projects (where
we checkout different branches from the same project), this would lead us
to fetching the same clone bundle multiple times. Automatically skip the
clone bundle logic if the project-objects/ dir already exists.
Bug: https://crbug.com/gerrit/10993
Change-Id: I82c6fa1faf8605fd56c104fcea2a43dd4eecbce4
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/298682
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The default sync output should show a progress bar only for successful
commands, and the error output for any commands that fail. Implement
that policy here.
Bug: https://crbug.com/gerrit/11293
Change-Id: I85716032201b6e2b45df876b07dd79cb2c1447a5
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297905
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When sync moved to consume clone output, it merged stdout & stderr,
but the retry logic in this function is based on stderr only. Move
it over to checking stdout.
Change-Id: I71bdc18ed25c978055952721e3a768289d7a3bd2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297902
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Use multiprocessing to run diff in parallel.
Change-Id: I61e973d9c2cde039d5eebe8d0fe8bb63171ef447
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297483
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Python 3 has a simpler super() style so switch to it to make the
code a little simpler and to stop pylint warnings.
Change-Id: I1b3ccf57ae968d56a9a0bcfc1258fbd8bfa3afee
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297383
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
These are the only users in the tree that process the output as it's
produced. All others capture all the output first and then process
the results. However, these functions still don't fully return until
it's finished processing, and these funcs are in turn used in other
synchronous code paths. So it's unclear whether anyone will notice
that it's slightly slower or less interactive. Let's try it out and
see if users report issues.
This will allow us to simplify our custom GitCommand code and move it
over to Python's subprocess.run, and will help fix interleaved output
when running multiple commands in parallel (e.g. `repo diff -j8`).
Change-Id: Ida16fafc47119d30a629a8783babeba890515de0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297144
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
A little sugar simplifies the code a bit.
Change-Id: Ie2b8a965faa9f9ca05c7be479d03e8e073cd816d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/296522
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
_CheckForImmutableRevision is used to see if repo can
skip fetching a project, but 'git rev-parse' with partial
clone does a data fetch to accomplish this.
Changed to use: 'git rev-list -1 --missing=allow-any <SHA>^0' which
checks the local ref without fetching from the server first.
Bug: [google internal] b/179477822
Testing:
- Unit tests
- Verified init/sync working on aosp-master
- Verified wwith a pinned manifest that local ref check works (no fetch)
Change-Id: If327b893c6658421f41df1f58c337f53b4c60ce6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/296142
Reviewed-by: Dan Willemsen <dwillemsen@google.com>
Tested-by: Ian Kasprzak <iankaz@google.com>
Added "--use-superporject" option to sync.py to fetch project SHAs from
superproject. If there are any missing projects in superprojects, it
prints the missing entries and exits. If there are no missing entries,
it will use SHAs from superproject to fetch the projects from git.
Tested the code with the following commands.
$ ./run_tests tests/test_manifest_xml.py
$ ./run_tests -v tests/test_git_superproject.py
$ ./run_tests -v
Tested the sync code by copying all the repo changes into my Android
AOSP checkout and adding <superporject> tag to default.xml. With
local modification to the code to print the status,
.../WORKING_DIRECTORY$ repo sync --use-superproject
repo: executing 'git clone' url: sso://android/platform/superproject
repo: executing 'git ls-tree'
Success: []
Bug: https://crbug.com/gerrit/13709
Tested-by: Raman Tenneti <rtenneti@google.com>
Change-Id: Id18665992428dd684c04b0e0b3a52f46316873a0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/293822
Reviewed-by: Mike Frysinger <vapier@google.com>
We're committed to Python 3 at this point, so purge all the
is_python3 related dynamic checks.
Bug: https://crbug.com/gerrit/10418
Change-Id: I4c8b405d6de359b8b83223c9f4b9c8ffa18ea1a2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/292383
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When checkout is done with Git worktrees then the HEAD in the
bare-git repositories point to the initialized default (e.g.
'refs/heads/master'). This default branch does not exist
locally and is not automatically created.
When a user now creates a branch in any git repository named
'master' then it is no longer possible to get rid of this branch,
neither is it possible to switch to another branch and switch
back to this master branch. Git concludes the 'master' branch is
already checked out (in the bare Git) and that results in a
lockdown of this master branch.
To repoduce this issue, run these commands in a repo tree
checked out with --worktree:
- git checkout master # assuming the remote repo has a master branch,
# a local tracking branch master is created here
- git checkout -b temp
- git checkout master # This one now fails
- git branch -d master # fails too
The failure is caused by Git assuming the master branch is checked out
by the bare git repository since HEAD is pointing towards it.
To workaround this, we always detach HEAD in the bare-git when
syncing. We don't need it to point to a ref in general, but we
would like it to be valid so git tools "just work" if they're run
in here.
Signed-off-by: Remy Bohmer <oss@bohmer.net>
Change-Id: I15c96604363c41f0d01c42f533174393097daeb5
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/290985
Reviewed-by: Mike Frysinger <vapier@google.com>
When intializing a new repo with the --reference option on Windows 10
the objects/info/alternates in each git repository is created with
Windows line endings (\r\n), leading to the following error:
error: object directory C:/<PATH_TO_MIRROR>/<REPO_NAME>.git/objects?
does not exist; check .git/objects/info/alternates
This can be fixed by simply using unix line endings on both
Windows and unix platforms.
Reported-by: Francisco Javier Alvarez Garcia <javier.alvarez.garcia.17@gmail.com>
Follow-up-from: I268fe029ede68802c21037b0f2ae8a95afb85e48
Bug: https://crbug.com/gerrit/13208
Change-Id: I6da60c4ca957778b3c42ab6b9ad85c40483f0042
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/289431
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Remy Bohmer <oss@bohmer.net>
Worktree .git and gitdir reference files are written by Git with
Unix line ending, even on Windows & macOS. The conversion to
relative paths makes these files end with DOS line endings in
Windows. The Git integration in Visual Studio 2019 cannot deal
with these DOS line endings and considers these worktrees invalid.
Signed-off-by: Remy Bohmer <github@bohmer.net>
Change-Id: I088cfd994f3cc31db4e0ca7791fa0a4ee3ac222f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/289310
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Remy Bohmer <linux@bohmer.net>
We conflate the manifest & parsing logic with the management of the
repo client checkout in a single class. This makes testing just one
part (the manifest parsing) hard as it requires a full checkout too.
Start splitting the two apart into separate classes to make it easy
to reason about & test.
Change-Id: Iaf897c93db9c724baba6044bfe7a589c024523b2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/288682
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The project.py file is huge and contains multiple
classes. By moving it to seperate class files the code
becomes more readable and maintainable.
Signed-off-by: Remy Bohmer <github@bohmer.net>
Change-Id: Ida9d99d31751d627ae1ea0373418080696d2e14b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/281293
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Remy Bohmer <linux@bohmer.net>
Instead of hardcoding "master" as our default, use the remote server's
default branch instead. For most people, this should be the same as
"master" already. For projects moving to "main", it means we'll use
the new name automatically rather than forcing people to use -b main.
For repositories that never set up a default HEAD, we should still use
the historical "master" default.
Bug: https://crbug.com/gerrit/13339
Change-Id: I4117c81a760c9495f98dbb1111a3e6c127f45eba
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/280799
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
This change increases the speed of the command with parallelization with
processes. The parallelization with threads doesn't work well, and
increasing the number of jobs to many (8 threads ~) didn't increase the speed.
Possibly, the global interpreter lock of Python affects.
Bug: https://crbug.com/gerrit/12389
Change-Id: Icbe5df8ba037dd91422b96f4e43708068d7be924
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/279936
Tested-by: Kimiyuki Onaka <kimiyuki@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
worktreeconfig extension only appears with version Git 2.20.0
Change-Id: I3ea8b7d9f8a1f7953e536edd77b09cbc4f8f3158
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/276700
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Adrien Bioteau <adrien.bioteau@gmail.com>
The intention of the check is to verify whether the target
file name contains a wild card. The code, however, assumes
that if the file is non-existent - it contains a wild card.
This has the side effect that a target file that does not
exist at the moment of the check is considered to contain a
wild card, this leads itself to softlink not being created.
Change-Id: I4e4cd7b5e1b8ce2e4b2edc9abf5a1147cd86242f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/265736
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Angel Petkov <apetkov86@gmail.com>
Add retries with exponential backoff and jitter to the fetch
operations. By default don't change behavior and enable
behind the new flag '--fetch-retries'.
Bug: https://crbug.com/1061473
Change-Id: I492710843985d00f81cbe3402dc56f2d21a45b35
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/261576
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: George Engelbrecht <engeg@google.com>
This is a pretty common option for people to want too use, so include
it as a pass-thru option when cherry-picking.
Bug: https://crbug.com/gerrit/9418
Change-Id: I2a24c1ed7544541719caa4d3c0574347a151a1b0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/259853
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
The git cherry-pick already supports this, so plumb the existing repo
option down. Otherwise it's confusing when people use -c --ff and it
doesn't use that behavior.
Change-Id: Id68932ffa09204bb30b92a21aff185c00394a520
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/259852
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
When we download git sources, we get a progress bar (good) and we get
a dump of all the refs we downloaded (bad) as it can easily be 100+ if
not 1000+ depending on the project (for each git repo!). Lets rework
the output behavior so that:
* quiet: Only errors.
* default: Progress bars (if on a tty).
* verbose: Full output (progress bars & downloaded refs).
Bug: https://crbug.com/gerrit/11293
Change-Id: I87a380075e79de6805f91095876dd1b37d32873a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256456
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Since most ref namespaces are shared among all worktrees, trying to
set the pseudo m/<branch> in the common git repo ends up clobbering
each other when using shared checkouts. For example, in CrOS:
<project path="src/third_party/kernel/v3.8"
name="chromiumos/third_party/kernel"
revision="refs/heads/chromeos-3.8" />
<project path="src/third_party/kernel/v3.10"
name="chromiumos/third_party/kernel"
revision="refs/heads/chromeos-3.10" />
Trying to set m/master in chromiumos/third_party/kernel.git/ will
keep clobbering the other.
Instead, when using git worktrees, lets set the m/ pseudo ref to
point into the refs/worktree/ namespace which is unique to each
git worktree. So we have in the common dir:
chromiumos/third_party/kernel.git/:
refs/remotes/m/master:
ref: refs/worktree/m/master
And then in each worktree we point refs/worktree/m/master to the
respective manifest revision expression. Now people can use the
m/master in each git worktree and have it resolve to the right
commit for that worktree.
Bug: https://crbug.com/gerrit/12404
Change-Id: I78814bdd5dd67bb13218c4c6ccd64f8a15dd0a52
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256952
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Draft CLs were replaced by private/wip CLs in Gerrit instead years ago.
Change-Id: If4f3d6606aad40a6f1617a49681dfd45c64d3d37
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256673
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Add a helper to our git wrapper to find the .git subdir,
and then use that to detect internal rebase state.
Change-Id: I3b3b6ed4c1f45cc8c3c98dc19c7ca3aabdc46905
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256532
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Git likes to create .git files with read-only permissions which makes
it difficult to open+truncate+write in situ under Windows. Delete it
before we write the file content to workaround.
Change-Id: I3effd96525f0dfe0b90e298b6bf0b856ea26aa03
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256412
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Windows requires Administrator access to create symlinks. We can
mitigate this a bit by falling back to hardlinks as those may be
created by any user on the system. Do this with the git hooks as
these are supposed to be internal only and people shouldn't be
modifying them. If they do, they'll have to delink first. This
seems worth it to allow repo usage without extra privileges.
Change-Id: I996ea9c9238f7bd7d27d1d9b1f2786593bf75ef7
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256312
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
