As reported by pyflakes:
subcmds/abandon.py:84: undefined name 'p'
The name of the variable should be 'proj'.
Change-Id: Ic09eb92e8db6b510e99efce010bd0bb094d7cbfe
repo can be configured to download from any number of remote git repos.
However when one fails repo doesn't report which one. Example:
Fatal: remote error: Daily ls-remote rate limit exceeded for IP xx.xx.xx.xx
TEST=repo init -q -u https://chromium.googlesource.com/chromiumos/manifest.git
# Apply patch in ./.repo/repo/
# Simulate a git remote error:
sed -i -e 's#chromiumos/docs#chromiumos/XXdocs#' .repo/manifests/full.xml
repo sync --quiet --force-sync docs
# error message now shows the remote URL
Optional test tip: reduce the time.sleep(random(...)) in ./.repo/repo/project.py
Change-Id: I4509383b6a43a8e66064778e8ed612d8a735c8b6
If you don't know that the url to git-repo itself can be overridden via
REPO_URL, it's hard to debug cases where REPO_URL is accidentally set to
another repository, e.g. inside a Jenkins CI job. What makes is even
harder is that the ".repo/repo" directory gets silently removed in such
cases as verifications fails, which makes it impossible to look at the
cloned files to understand the problem.
To better protect against such an issue, warn if the cloned git-repo
repository does not contain a top-level "repo" file, and state that the
".repo/repo" directory will be removed in case of a clone failure.
Change-Id: I697b4999205a5967910c0237772ccaada01e74d4
Currently, if direct fetch of a sha1 is not supported by git server and
depth option is used, we fallback on syncing the upstream branch by
ignoring depth option.
This fallback doesn't work in next 2 cases:
(1) upstream attribute is not specified in manifest
(2) depth option is passed to repo init command
(not with clone-depth attribute in manifest)
This commit do the following:
- fixes (1) by updating condition used to apply fallback
first we retry with depth set to None, then by syncing all branches
- fixes (2) by passing depth as argument of _RemoteFetch() method
thus, its value is not set again to depth value passed to repo init
command when applying fallback
Change-Id: Ifd6fffafc49ba229df624b0d7b64c83d47619d17
repo already special-cases sso:// URLs to behave similarly to https://
and rpc:// elsewhere in repo, but it forgot to do so here.
Noticed when trying to use relative URLs in a manifest obtained using
an sso:// URL.
Change-Id: Ia11469a09bbd6e444dbc4f22c82f9bbe9f5fd083
A recent backward incompatible change created confusion and loss of
productivity and highlighted the very limited amount of information
provided when repo sync fails; merely recommending to --force-sync
and blow-up git repos without any hint as to why. The addition of
this basic _error(...) call would have provided a clue and will in
the future.
BUG=Issue 232
TEST=simulate a breakage similar to the ones reported at
https://groups.google.com/a/chromium.org/forum/#!topic/chromium-os-dev/2-0oCy_CX5s
cd .repo/projects/src/third_party/libapps.git/
file info; rm info; ln -s wronglink info
cd -
repo sync src/third_party/libapps/
# error message now shows the failure
Change-Id: Idd2f177a096f1ad686caa8c67cb361d594ccaa57
The --quiet option reduces the output to just
a list of projects with modified workspaces (and
orphans if -o is specified)
A common use case is when performing a full-workspace
merge. The integrator will kick-off a merge via:
repo forall -c git merge <some tag>
And then produce a short list of conflicted projects via:
repo status -q
The integrator can then iteratively fix and clean up all conficted
components. The merge is complete when:
repo status -q
returns no output.
Change-Id: Ibbba8713eac35befd8287c95948874e23fd5c7e2
when you want to delete all local branches, you should be find
all branches' name, and type them behind 'repo abandon' command.
Usage:
repo abandon --all [<project>...]
Change-Id: I4d391f37fb9d89b8095488c585468eafc1a35f31
When repo syncs a manifest that utilizes multiple branches
in the same project, then the sync will use an extra
thread for each "duplicate". For example, if
the manifest includes the project "foo" and "bar"
twice, then "repo sync -jN" will fetch with N+2 threads.
This is caused by _FetchHelper() releasing the thread semaphore
object each time it's called, even though _FetchProjectList()
may call this function multiple times within the scope of a
single thread.
Fix by moving the thread semaphore release to
_FetchProjectList(), which is only called once per thread
instance.
Change-Id: I1da78b145e09524d40457db5ca5c37d315432bd8
When there's a symlink to a directory, os.walk still lists the symlink
in dirs, even if it isn't configured to follow symlinks. This will fail
the listdirs check if the symlink is broken (either before or during the
cleanup). So instead, check for directory symlinks and remove them using
os.remove.
Bug: Issue 231
Change-Id: I0ec45a26be566613a4a39bf694a3d9c6328481c2
When there are nested projects in a manifest, like on AOSP right now:
<project path="build" name="platform/build" />
<project path="build/blueprint" name="platform/build/blueprint" />
<project path="build/kati" name="platform/build/kati" />
<project path="build/soong" name="platform/build/soong" />
And the top "build" project is removed (or renamed to remove the
nesting), repo just wipes away everything under build/ and re-creates
the projects that are still there. But it only checks to see if the
build/ project is dirty, so if there are dirty files in a nested
project, they'll just be blown away, and a fresh worktree checked out.
Instead, behave similarly to how `git clean -dxf` behaves and preserve
any subdirectories that have git repositories in them. This isn't as
strict as git -- it does not check to see if the '.git' entry is a
readable gitdir, just whether an entry named '.git' exists.
If it encounters any errors removing files, we'll print them all out to
stderr and tell the user that we were unable to clean up the obsolete
project, that they should clean it up manually, then sync again.
Change-Id: I2f6a7dd205a8e0b7590ca5369e9b0ba21d5a6f77
Allow the 'remote' element in the manifest file to define an optional
'pushurl' attribute which is passed into the .git/config file.
Change-Id: If342d299d371374aedc4440645798888869c9714
Signed-off-by: Steve Rae <steve.rae@raedomain.com>
pylint reports a lot of warnings, but many of them are false positive,
and it's difficult to configure it. It also seems that for some reason
the included config file is not working well with the latest version.
Update the documentation to recommend using pyflakes and flake8 instead
of pylint. Remove the pylint config and add a basic flake8 config with
minimum settings:
- Maximum line length 80 columns
- Ignore warnings about indentation (repo uses 2 rather than expected 4)
- Ignore warnings about import placement
In this commit no code cleanup is done, and it's expected that most of
the files will throw up quite a few warnings, at least for flake8. These
can be cleaned up in follow-up commits.
The existing pylint suppression comments are left as-is. These will be
helpful when cleaning up pyflakes warnings later.
Change-Id: I2f7cb4340266ed07cc973ca6483b8f09d66a765b
The shared object stores confuse git and make it throw away objects which are
still in use. We'll avoid that problem by disabling automatic pruning on those
projects, but there's nothing preventing a user from changing the config back
or pruning a repository manually.
BUG=chromium:375945
TEST=Ran repo sync on fresh ChromeOS checkout, starting with a branch of repo
with this change. Verified that the kernel projects and no others were
identified as having shared object stores, and that repo successfully disabled
automatic pruning in their configs. Re-enabled pruning and ran repo sync just
on one of the kernel directories. Verified that pruning was re-disabled as a
result.
Change-Id: I728ed5b06f0087aeb5a23ba8f5410a7cd10af5b0
The requirement to explicitly specify the local project when starting
a new repo branch is somewhat counter intuitive.
This patch uses the current directory's git tree as the default
project.
Tested by running
'repo start <name>'
observed that the result is the same as if running
'repo start <name> .'
Change-Id: If106caa801b4cd5ba70dbe8354a227d59f100aa3
When nothing is pending, most of this code is already short-circuited.
Hoist the single check up to make this more obvious/slightly faster.
Change-Id: Iec3a7e08eacd23a7c5f964900d5776bf5252c804
if a gerrit server has ssh and https access enabled, but user access
(for some users) is limited to https, 'repo upload' command will fail
for them.
Gerrit returns a ssh configuration (gerrit/ssh_info), that does not work
for users limited to https.
With this patch repo will test, if the returned ssh configuration from
gerrit/ssh_info is working. if not, it will fall back to https for upload.
Change-Id: If98f472e994f350bf71f35610cd649b163f1ab33
this check can only detect errors that happen within 1 sec after launching
ssh. But this is typically enough to catch configuration issues like
'connection refused' or 'authentication failed'.
Change-Id: I00b6f62d4c2889b1faa6c820e49a198554c92795
Instead of
Do you want to allow this script to run (yes/yes-never-ask-again/NO)? (yes/always/NO)?
ask
Do you want to allow this script to run (yes/always/NO)?
Change-Id: I5f5a2d0e88086a8d85e54fb8623a62d74a20956a
Signed-off-by: Jonathan Nieder <jrn@google.com>
There have been a number of changes in the repo wrapper since the last
increment that was done in fee390ee:
- 9711a98 init: Add --no-clone-bundle option
- 631d0ec Support non-ASCII GNUPGHOME environment variable
- 4088eb4 repo: Cleaned up pylint/pep8 violations
- 5553628 repo: Add check of REPO_URL env variable
- 745b4ad Fix gitc-init behavior
- d3ddcdb Ignore clone.bundle on HTTP 501, i.e. Not Implemented
Change-Id: I3f763ef0ec2df2d726dff429021b48ad474148f1
The constant prompting when registered hooks change can be tedious and
has a large multiplication factor when the project is large (e.g. the
AOSP). It gets worse as people want to write more checks, hooks, docs,
and tests (or fix bugs), but every CL that goes in will trigger a new
prompt to approve.
Let's tweak our trust model when it comes to hooks. Since people start
off by calling `repo init` with a URL to a manifest, and that manifest
defines all the hooks, anchor trust in that. This requires that we get
the manifest over a trusted link (e.g. https or ssh) so that it can't
be MITM-ed. If the user chooses to use an untrusted link (e.g. git or
http), then we'll fallback to the existing hash based approval.
Bug: Issue 226
Change-Id: I77be9e4397383f264fcdaefb582e345ea4069a13
During sync, repo runs `git read-tree --reset -u -v HEAD` which causes
git-lfs's smudge filter to run. However this fails because git-lfs does
not work with bare repositories.
Add lfs.filter configuration to the project config as suggested in the
comments on the upstream git-lfs client issue [1]. This prevents the
smudge filter from running, and the sync completes successfully.
For any projects that have LFS objects, `git lfs pull` must be executed.
[1] https://github.com/github/git-lfs/issues/1422
Bug: Issue 224
Change-Id: I091ff37998131e2e6bbc59aa37ee352fe12d7fcd
