This gives the user the last chance to confirm where the change is
going to be sent to. Knowing the review server URL will help the
user decide if continuing with the upload makes sense.
Signed-off-by: Shawn O. Pearce <sop@google.com>
These used to be used back when we had Gerrit 1.x support and used
HTTP based uploads to transmit changes for review. Since we moved
entirely to Gerrit 2.x, these are no longer called.
Signed-off-by: Shawn O. Pearce <sop@google.com>
Its unlikely that a new version of repo will be delivered in any
given day, so we now check only once every 24 hours to see if repo
has been updated. This reduces the sync cost, as we no longer need
to contact the repo distribution servers every time we do a sync.
repo selfupdate can still be used to force a check.
Signed-off-by: Shawn O. Pearce <sop@google.com>
Usually repo is upgraded only once a week, if that often. Most of
the time we invoke HasChanges on the repo project (or even on the
manifest project) the current HEAD will resolve to the same SHA-1
as the remote tracking ref, and there are therefore no changes.
Signed-off-by: Shawn O. Pearce <sop@google.com>
The point of the progress meter is to let the user know that the
task is progressing, and give them a chance to estimate when it will
be complete. If the task completes in under 0.5 seconds then it
is sufficiently fast enough that the user doesn't need to be kept
up-to-date on its progress; in fact showing the meter may just slow
the task down waiting on the tty to redraw.
We now delay the progress meter 0.5 seconds (or 1 second if the
Python time.time() function isn't accurate enough) to avoid any
really fast tasks, like a no-op local sync.
Signed-off-by: Shawn O. Pearce <sop@google.com>
The trace output often interfers with the progress meter, so its
easier to just disable the progress meter if trace is active.
Its already verbose enough to let the user know we are working,
which is all the progress meter is there for anyway.
Signed-off-by: Shawn O. Pearce <sop@google.com>
The value of the varible TRACE was copied during the import, which
happens before the --trace option can be processed. So instead we
now use a function to determine if the value is set, as the function
can be safely copied early during import.
Signed-off-by: Shawn O. Pearce <sop@google.com>
These are not as expensive as spawning a git command, but they are
not free either. We want to keep track of how many times we wind
up calling them on any particular operation.
Signed-off-by: Shawn O. Pearce <sop@google.com>
If the m/BRANCH ref is already pointing at the value set in the
manifest there is no reason to set it again. Leave it alone,
thus saving a full fork+exec call.
Signed-off-by: Shawn O. Pearce <sop@google.com>
We now cache the output of `git config --list` for each of our
GitConfig instances in a Python pickle file. These can be read
back in using only the Python interpreter at a much faster rate
than we can fork+exec the git config process.
If the corresponding git config file has a newer modification
timestamp than the pickle file, we delete the pickle file and
regenerate it. This ensures that any edits made by the user
will be taken into account the next time we consult the file.
This reduces the time for a no-op repo sync from 0.847s to 0.269s.
Signed-off-by: Shawn O. Pearce <sop@google.com>
By resolving the current HEAD and the manifest revision using pure
Python, we can in the common case of "no changes" avoid a lot of
git operations and directly jump out of the local sync method.
This reduces the no-op `repo sync -l` time for Android's 114 projects
from more than 6s to under 0.8s.
Signed-off-by: Shawn O. Pearce <sop@google.com>
Its much faster to read the refs from 114 projects when the reader
is pure Python and just doing file IO than forking 114 git commands
and parsing their output.
The reader caches refs based upon file mtimes. If any single ref
file has been modified since the last read, we re-read the entire
repository's ref namespace. This simplifies the code as we don't
need to worry about shooting down symbolic-refs, but it may cause
more IO than is necessary if only one ref gets updated.
This change drops `repo branches` in Android from 1.658s to 0.206s.
Likewise, `repo sync` improves dramatically as well.
Signed-off-by: Shawn O. Pearce <sop@google.com>
This is invoked once per project in `repo sync`. Taking it out
saves about 1/114 of a second, so on a large set of projects like
Android it can save up to a full second of sync time.
Signed-off-by: Shawn O. Pearce <sop@google.com>
If the user has disabled a prompt, skip the two commands we use to
obtain the list of commits and the date of the branch. These will
never be displayed and just waste the end-user's time.
Signed-off-by: Shawn O. Pearce <sop@google.com>
If review.URL.autoupload is set to true in a project's .git/config
or in ~/.gitconfig then `repo upload` will automatically upload,
and skip prompting the end-user.
Conversely, if review.URL.autoupload is set to false, then repo
will refuse to upload to that project.
Bug: REPO-25
Signed-off-by: Shawn O. Pearce <sop@google.com>
In the case of:
[url "Foo"]
insteadOf = Bar
We should return "Bar" for the key "url.Foo.insteadof", but not
for the key "url.foo.insteadof". This requires splitting the
key into its components and only lower casing the section and
value name, leaving the subsection portion alone.
Signed-off-by: Shawn O. Pearce <sop@google.com>
Someone pointed out this message isn't always the truth; so we
shouldn't print it. The code path is executed when there are
published commits, yet our output talks about unpublished ones.
Signed-off-by: Shawn O. Pearce <sop@google.com>
We now try to sync all projects that can be done safely first, before
we start rebasing user commits over the upstream. This has the nice
effect of making the local tree as close to the upstream as possible
before the user has to start resolving merge conflicts, as that extra
information in other projects may aid in the conflict resolution.
Informational output is buffered and delayed until calculation for
all projects has been done, so that the user gets one concise list
of notice messages, rather than it interrupting the progress meter.
Fast-forward output is now prefixed with the project header, so the
user can see which project that update is taking place in, and make
some relation of the diffstat back to the project name.
Rebase output is now prefixed with the project header, so that if
the rebase fails, the user can see which project we were operating
on and can try to address the failure themselves.
Since rebase sits on a detached HEAD, we now look for an in-progress
rebase during sync, so we can alert the user that the given project
is in a state we cannot handle.
Signed-off-by: Shawn O. Pearce <sop@google.com>
rebase interactive (aka rebase -i) has changed in newer versions
of git, and doesn't always generate the sequence of commits the
same way it used to. It also doesn't handle having a previously
applied commit try to be applied again.
The default rebase algorithm is better suited to our needs.
It uses --ignore-if-in-upstream when generating the patch series
for git-am, and git-am with its 3-way fallback is able to handle
a rename case just as well as the cherry-pick variant used by -m.
Its also a generally faster implementation.
Signed-off-by: Shawn O. Pearce <sop@google.com>
If there are no projects to fetch, the progress meter would
have divided by zero during `repo sync`, and that throws a
ZeroDivisionError. Instead we report the progress with an
unknown amount remaining.
Signed-off-by: Shawn O. Pearce <sop@google.com>
Users may want to upgrade only repo to the latest release, but
leave their working tree state alone and avoid 'repo sync'.
Signed-off-by: Shawn O. Pearce <sop@google.com>
Users can now use 'repo grep' to search all projects, rather than
'repo forall -c git grep'. Its not only shorter to type, but it
also filters results better by highlighting which projects matched
in the client workspace.
Signed-off-by: Shawn O. Pearce <sop@google.com>
If there is nothing output at all, tell the user the working tree is
completely clean. It just gives them a bit more of a warm-fuzzy
feeling knowing repo and until the end. It also more closely
matches with the output of git status.
Signed-off-by: Shawn O. Pearce <sop@google.com>
This way users can see how much is left during fetch. Its
especially useful when most syncs are no-ops but there are
hundreds of repositories to poll.
Signed-off-by: Shawn O. Pearce <sop@google.com>
This permits usage of 'repo sync' while offline, as we bypass the
network based portions of the code and do only the local sync.
An example use case might be:
repo sync -n ; # while we have network
... some time later ...
repo sync -l ; # while without network, come up to date
Signed-off-by: Shawn O. Pearce <sop@google.com>
The -d flag moves the project back to a detached HEAD state,
matching what is listed in the manifest. This can be useful to
set a client to something stable (or at least well-known), such as
before a sequence of 'repo download' commands are used to get some
changes for testing.
Signed-off-by: Shawn O. Pearce <sop@google.com>
This makes it easier to update all repositories, without actually
impacting the working directory, or learning about how to use
`repo forall -c 'git fetch $REPO_REMOTE' `.
Signed-off-by: Shawn O. Pearce <sop@google.com>
This is only meant to be passed through while repo upgrades itself
during a sync. It should never be something a user invokes on
their own.
Signed-off-by: Shawn O. Pearce <sop@google.com>
If `repo start foo` fails due to uncommitted and unmergeable changes
in a single project, we have switched half of the projects over to
the new target branches, but didn't on the one that failed to move.
This change improves the situation by doing three things differently:
- We keep going when we encounter an error, so other projects
that can successfully switch still switch.
- We ignore projects whose current branch is already on the
requested name; they are logically already setup.
- We checkout the branch if it already exists, rather than
trying to recreate the branch.
Bug: REPO-22
Signed-off-by: Shawn O. Pearce <sop@google.com>
There isn't any great value in buffering stdout into memory
coming from git checkout. So don't bother doing it.
Signed-off-by: Shawn O. Pearce <sop@google.com>
We now display a summary of the available topic branches in this
client, based upon a sorted union of all existing projects.
Bug: REPO-21
Signed-off-by: Shawn O. Pearce <sop@google.com>
The repo script often uses a pager by default and will produce
control characters (coloring) to standard output when using the
pager, even if the output is redirected to another pipe or script.
This is because the pager setup checked for the terminal presence
on FD 0, and in case of redirection FD 0 is still attached to
the terminal.
Instead require that both FD 0 and FD 1 are connected to the terminal
in order to start the pager.
Bug: REPO-19, b.android.com/2004
Signed-off-by: Shawn O. Pearce <sop@google.com>
If the user has multiple projects to upload changes to, and they
are all going to the same review server, we only need to query the
'/ssh_info' data once.
Signed-off-by: Shawn O. Pearce <sop@google.com>
If /ssh_info is protected by an HTML based login page, we may get
back a "200 OK" response from the server with some HTML document
asking us to authenticate. This can't be parsed into a host name
and port number, so we shouldn't even try.
Valid host names and decimal port numbers cannot contain '<', but
an unexpected HTML login page would. So we test for '<' to give
us a fair indicator that the content isn't what we think it is,
and bail out.
Signed-off-by: Shawn O. Pearce <sop@google.com>
If a review URL is set to 'http://host/Gerrit' because the user
thinks that is the correct way to point repo at Gerrit, we should
be a bit more flexible and fix the URL by dropping the '/Gerrit'
suffix and replace it with '/ssh_info'.
Likewise, if a review URL points already at '/ssh_info' for a Gerrit
instance, we should leave it alone.
Signed-off-by: Shawn O. Pearce <sop@google.com>
Modern Gerrit2 automatically outputs the URL for each commit to
stderr as it creates the records. Dumping the URL ourselves is
unnecessary additional output, and worse is just an approximate
guess for the correct web URL. Gerrit might not live at the top
level directory for the server, or might even prefer a different
hostname for web connections than what is listed in the manifest.
Signed-off-by: Shawn O. Pearce <sop@google.com>
On a mirror client we don't prompt for user.name,user.email as the
data is only necessary if you will make new commits. On a re-init
we were testing the command line option, not the existing IsMirror
property from the manifest configuration file.
Signed-off-by: Shawn O. Pearce <sop@google.com>
This allows the user to run "repo init -u" again after an
initial attempt failed due to an invalid URL.
Signed-off-by: Shawn O. Pearce <sop@google.com>
Instead of a stack trace ending in origin/master not existing we
now tell the user the manifest url is invalid if 'git fetch' has
failed out early.
Signed-off-by: Shawn O. Pearce <sop@google.com>
If the value obtained is None we now set the variable to
'' instead, in an attempt to make execve() happier about
our 3rd argument, the env dictionary.
Signed-off-by: Shawn O. Pearce <sop@google.com>
We now correctly support re-initializing an existing client to point
to a different branch of the same manifest repository, effectively
allowing the client to switch the baseline it is operating on.
Signed-off-by: Shawn O. Pearce <sop@google.com>
Simply setting repo.mirror true doesn't make a client into a mirror.
The on-disk layout is completely wrong for a mirror repository,
and until we fix our layout for a non-mirror client to more closely
resemble the upstream we can't do anything to easily turn on or
turn off the mirror status flag.
Signed-off-by: Shawn O. Pearce <sop@google.com>
This has the same effect as saying "export REPO_TRACE=1" in
your shell prior to starting repo, but is documented in the
command usage and perhaps easier to use.
Signed-off-by: Shawn O. Pearce <sop@google.com>
This can be useful to create a new manifest from an existing client,
especially if the client wants to use the "-r" option to set each
project's revision to the current commit SHA-1, making a sort of a
tag file that can be used to recreate this exact state elsewhere.
Signed-off-by: Shawn O. Pearce <sop@google.com>
