The fix for issue #46 in 5d016502eb appears to break syncing in some
situations: the branch is deleted after the point where it's been
configured, which deletes part of its configuration and causes the
config to change each time you call `repo init`, alternating between a
configuration that works and one that doesn't.
Instead of deleting the branch with git branch -D, use git update-ref -d
which just deletes the ref (to avoid the rebase) without touching the
configuration for the branch that was set up during the first repo init.
This appears to ensure the config is left in a valid state all the time
no matter what combination of repo init commands you run, without
reintroducing the rebasing issue.
Change-Id: Iaadaa6e56a46840bbc593fa5b35cb5b34cd3ce69
Git requires the values in this environment variable to be
single quoted. repo must wrap the expression into '' before
adding it to the environment.
Change-Id: I20a1fb8772f9aa6e9fd5a0516c981c2ca020ef05
This patch fixes repo behaviour when running sync -d with unmodified
topic branches.
Prior to this patch sync -d would see the latest revision is already
checked out, thus staying on the branch. Since "-d" means detach we
should follow git's behaviour and actually detach from the branch in
that case.
Basic test case - after a fresh repo init + sync -
* repo start --all testdetach
* repo sync -d
* repo status
-> status shows active topic branch "testdetach",
should show :
nothing to commit (working directory clean)
Change-Id: Ic1351e6b5721b76557a51ab09f9dd42c38a4b415
Currently repo-rebase requires that all modifications be committed
locally before it will allow the rebase. In high-velocity environments,
you may want to just pull in newer code without explicitly creating
local commits, which is typically achieved using git-stash.
If called with the --auto-stash command line argument, and it is
determined that the current index is dirty, the local modifications
are stashed, and the rebase continues. If a stash was performed, that
stash is popped once the rebase completes.
Note that there is still a possibility that the git-stash pop will
result in a merge conflict.
Change-Id: Ibe3da96f0b4486cb7ce8d040639187e26501f6af
See repo issue #46 :
https://code.google.com/p/git-repo/issues/detail?id=46
When using repo init -b on an already existing repository,
the next sync will try to rebase changes coming from the old manifest
branch onto the new, leading in the best case scenario to conflicts
and in the worst case scenario to an incorrect "mixed up" manifest.
This patch fixes this by deleting the "default" branch in the local
manifest repository when the -d init switch is used, thus forcing
repo to perform a fresh checkout of the new manifest branch
Change-Id: I379e4875ec5357d8614d1197b6afbe58f9606751
Calculation of where the include file lives was broken by 23acdd3f14
since it resulted in looking for the first include in .repo, rather
than .repo/manifests.
While people can work around it via setting their includes to
manifests/<include-target>, that breaks down since each layer of
includes would then have to be relative.
As such, restore the behaviour back to 2644874d; manifests includes
are calculated relative to the manifest root (ie, .repo/manifests);
local manifests includes are calculated relative to .repo/ .
Change-Id: I74c19ba614c41d2f08cd3e9fd094f3c510e3bfd1
Ancient versions of Git don't understand the -c command line flag
that we tried to use to pass http_proxy down into Git on Darwin.
Use the environment variable instead, to more gracefully degrade
with these old versions.
Change-Id: Iffffa32088c1fd803895b990b3377ecfec6a1b14
This patch adds the option to include topic branches by adding the
following to a .gitconfig file:
uploadtopic = true
This option is only read in when the -t option is not already
specified at the command line.
Change-Id: I0e0eea49438bb4e4a21c2ac5bd498b68b5a9a845
This is basically the same repository, but may be slightly more
up-to-date than the one on code.google.com/p/git-repo.
Change-Id: I5c99539f53231958eefb6993f00997c9adf0a3c9
Fix detection for Git not being in $PATH during the initial
run of `repo init` in a new directory.
Change-Id: I2b1fcce1fb8afc47271f5c3bd2a28369009b2fb7
The system libcurl library seems to ignore http_proxy on Mac OS
X systems. Copy the http_proxy environment variable (if set) as
`git -c http.proxy` whenever running a Git command.
Change-Id: I0ab29336897178f70b85092601f9fcc306dd17e1
Barring any kernel bugs, if this directory exists and there is
a symlink in there (which will point to the battery object),
that means there is a battery known to the kernel.
No symlink should mean no battery as far as the kernel is concerned.
Change-Id: Ib12819a5bbb816f0ae5ca080e5812a2db08441e9
Mirror manifest and repo projects are outside the manifest and
have no groups. Allow project groups to be None for these
projects.
Change-Id: I3e1c4add894fe1c43aa4e77a1fc1558aa10dd191
Combine manifest and local_manifest into a single list of elements
before parsing. This will allow elements in the local_manifest to
affect elements in the main manifest.
Change-Id: I4d34c9260b299a76be2960b07c0c3fe1af35f33c
Having the ability to include other manifests is a very practical feature
to ease the managment of manifest. It allows to divide a manifest into separate
files, and create different environment depending on what we want to release
You can have unlimited recursion of include, the manifest configs will simply be concatenated
as if it was in a single file.
command "repo manifest" will create a single manifest, and not recreate the manifest hierarchy
for example:
Our developement manifest will look like:
<?xml version='1.0' encoding='UTF-8'?>
<manifest>
<default revision="platform/android/main" remote="intel"/>
<include name="server.xml"/> <!-- The Server configuration -->
<include name="aosp.xml" /> <!-- All the AOSP projects -->
<include name="bsp.xml" /> <!-- The BSP projects that we release in source form -->
<include name="bsp-priv.xml" /> <!-- The source of the BSP projects we release in binary form -->
</manifest>
Our release manifest will look like:
<?xml version='1.0' encoding='UTF-8'?>
<manifest>
<default revision="platform/android/release-ext" remote="intel"/>
<include name="server.xml"/> <!-- The Server configuration -->
<include name="aosp.xml" /> <!-- All the AOSP projects -->
<include name="bsp.xml" /> <!-- The BSP projects that we release in source form -->
<include name="bsp-ext.xml" /> <!-- The PREBUILT version of the BSP projects we release in binary form -->
</manifest>
And it is also easy to create and maintain feature branch with a manifest that looks like:
<?xml version='1.0' encoding='UTF-8'?>
<manifest>
<default revision="feature_branch_foobar" remote="intel"/>
<include name="server.xml"/> <!-- The Server configuration -->
<include name="aosp.xml" /> <!-- All the AOSP projects -->
<include name="bsp.xml" /> <!-- The BSP projects that we release in source form -->
<include name="bsp-priv.xml" /> <!-- The source of the BSP projects we release in binary form -->
</manifest>
Signed-off-by: Brian Harring <brian.harring@intel.com>
Signed-off-by: Pierre Tardy <pierre.tardy@intel.com>
Change-Id: I833a30d303039e485888768e6b81561b7665e89d
Allows to ff-only a gerrit patch
This patch is necessary to automatically ensure that the patch will
be correctly submitted on ff-only gerrit projects
You can now use:
repo download (--ff-only|-f) project changeid/patchnumber
This is useful to automate verification of fast forward status of a patch
in the context of build automation, and commit gating (e.g. buildbot)
Change-Id: I403a667557a105411a633e62c8eec23d93724b43
Signed-off-by: Erwan Mahe <erwan.mahe@intel.com>
Signed-off-by: Pierre Tardy <pierre.tardy@intel.com>
BZ: 4779
Allows to revert a gerrit patch
This patch is necessary for the on-demand creation of
engineering builds using buildbot
You can now use:
repo download [--revert|-r project changeid/patchnumber
This is useful to automate reverting of a patch
in the context of build automation, and regression bisection
Change-Id: I3985e80e4b2a230f83526191ea1379765a54bdcf
Signed-off-by: Erwan Mahe <erwan.mahe@intel.com>
Signed-off-by: Pierre Tardy <pierre.tardy@intel.com>
default option uses git checkout, and thus overwrite the previous
checkouts. this is a problem for automated builds of several
changesets in the same project for daily builds of pending submission
You can now use:
repo download [--cherry-pick|-c] project changeid/patchnumber
This will parse the manifest, cd to the corresponding project
download the changes to FETCH_HEAD and cherry-pick the result.
This is useful to automate cherry-picking of a patch
in the context of build automation, and commit gating (e.g. buildbot)
Change-Id: Ib638afd87677f1be197afb7b0f73c70fb98909fe
Signed-off-by: Pierre Tardy <pierre.tardy@intel.com>
repo status should output filenames one by one instead of trying to
build a string from incompatible encodings (like utf-8 and sjis
filenames)
Change-Id: I52282236ececa562f109f9ea4b2e971d2b4bc045
There are use-cases when fetching all branch is impractical and
we really need to fetch only one branch/tag.
e.g. there is a large project with binaries and every update of a
binary file is put to a separate branch.
The whole project history might be too large to allow users fetch it.
Add 'sync-c' option to 'project' and 'default' tags to make it possible
to configure 'sync-c' behavior at per-project and per-manifest level.
Note that currently there is no possibility to revert boolean flag from
command line. If 'sync-c' is set in manifest then you cannot make
full fetch by providing a repo tool argument.
Change-Id: Ie36fe5737304930493740370239403986590f593
Previous incarnations of groups support left "groups=" in the
repo .config, which is now treated as "delete all the projects".
Treat empty groups configuration the same as no groups
configuration.
Change-Id: I57dab8dac55bdbf4cc181e2748cd2e4e510764f5
Fixes three errors:
Python doesn't like the line wrap after 'and'.
platform.system is a function, needs to be platform.system().
Typo all_platfroms instead of all_platforms.
Change-Id: Ia875e521bc01ae2eb321ec62d839173c00f86c2d
Projects may optionally specify their platform
(eg, groups="platform-linux" in the manifest).
By default, repo will automatically detect the platform. However,
users may specify --platform=[auto|all|linux|darwin].
Change-Id: Ie678851fb2fec5b0938aede01f16c53138a16537
Every project is in group "default". "-default" does not remove
it from this project. All group names specified in the manifest
are positive names as opposed to a mix of negative and positive.
Specified groups are resolved in order. If init is supplied with
--groups="group1,-group2", the following describes the project
selection when syncing:
* all projects in "group1" will be added, and
* all projects in "group2" will be removed.
Change-Id: I1df3dcdb64bbd4cd80d675f9b2d3becbf721f661
Allow the optional addition of "annotation" nodes nested under
projects. Each annotation node must have "name" and "value"
attributes. These name/value pairs will be exported into the
environment during any forall command, prefixed with "REPO__"
In addition, an optional "keep" attribute with case insensitive "true"
or "false" values can be included to determine whether the annotation
will be exported with 'repo manifest'
Change-Id: Icd7540afaae02c958f769ce3d25661aa721a9de8
Signed-off-by: James W. Mills <jameswmills@gmail.com>
Previously repo had incorrect code that did not really check
if sha1 presents in a project. It worked for tags though.
Check if a revision (either tag or sha1) is present by using
'git rev_parse' functionality.
Change-Id: I1787f3348573948573948753987394839487572b
Allows specifying a list of groups with a -g argument to repo init.
The groups act on a group= attribute specified on projects in the
manifest.
All projects are implicitly labelled with "default" unless they are
explicitly labelled "-default".
Prefixing a group with "-" removes matching projects from the list
of projects to sync.
If any non-inverted manifest groups are specified, the default label
is ignored.
Change-Id: I3a0dd7a93a8a1756205de1d03eee8c00906af0e5
Reviewed-on: https://gerrit-review.googlesource.com/34570
Reviewed-by: Shawn Pearce <sop@google.com>
Tested-by: Shawn Pearce <sop@google.com>
The -u option causes 'repo diff' to generate diff output
with file paths relative to the repository root,
so the output can be applied to the Unix 'patch' command.
The name '-u' was selected for convenience, because
both 'diff' and 'git diff' accept the option with the same name
to generate an 'unified diff' output suitable for 'patch' command.
Change-Id: I79c8356db4ed20ecaccc258b3ba139db76666fe0
Reviewed-on: https://gerrit-review.googlesource.com/34380
Reviewed-by: Shawn Pearce <sop@google.com>
Tested-by: Shawn Pearce <sop@google.com>
A convenient equivalent to `repo upload --br=<current git branch>`.
Note that the head branch will be selected for each project
uploaded by repo, so different branches may be uploaded for
different projects.
Change-Id: I10ad8ceaa63f055105c2d847c6e329fa4226dbaf
401: Unauthorized, authentication may be required. This is usually
handled internally by the HTTP client in Python. If it reaches
our code in repo, the Python HTTP client didn't find a password
in ~/.netrc that it could use.
403: Authentication was supplied, but is incorrect. It might be
that the CDN doesn't want to offer this clone.bundle file
to the client, but the Git fetch operation would still be
successful. This might arise if branch level read controls
were used in Gerrit Code Review and the /clone.bundle file
contained branches not visible to the client.
404: The server has no /clone.bundle file available.
In all of these cases, sliently ignore the /clone.bundle file HTTP
error and let the Git operation take over.
Change-Id: I1787f3cac86b017351952bbb793fe5874d83c72b
In case of manifest/smart sync repo changes ".merge" config
option from branch to SHA. Doing 'repo upload' fails as
repo tries to upload to a remote branch that looks like SHA
(e.g. refs/for/23423423423423423423423)
Do not update the .merge in case if revision is SHA.
Change-Id: I9139708fa17f21eec5a7e23c3255333626bf529e
Clients might be using their own special git-remote-* helper that
has a hypen in its name. Permit - in the scheme part of the URL
when trying to decide if it is an SSH URL and assume it is *not*
SSH if the URL matches "foo-bar://" style.
Change-Id: I7ba2d810a614f6e605a441d5972902c4a14e73fd
repo tool supports only Basic authentication for now. For those
who want to use this tool to manage their own projects, in case
the administrator has configured the Apache server with Digest
authentication method, users will fail to be authenticated when
they run the command 'repo init'.
Add the digest authentication password manager to the handler
list will fix this issue.
Since Git HTTP protocol will require the user be authenticated
for fetch operation first before pushing commits to the remote,
it is unlikely for the administrator to implement anonymous
read (aka pull) access and write access (aka push) for
authenticated user. Both read and write have to be authenticated.
Be aware that the user may have to add an extra line in his
~/.netrc file:
-------------------
account example.com
-------------------
where 'example.com' is the realm for Apache Digest authentication.
Change-Id: I76eb27b205554426d9ce1965deaaf727b87916cd
Signed-off-by: Xiaodong Xu <stid.smth@gmail.com>
repo status just prints "# on branch oprofile" if you have branched
in clean status. This doesn't really tell which branch is meant.
Instead we can use the same syntax with modified gits which will
give us detailed information.
Change-Id: I55fe5154d278e10a814281dd2ba501ec6e956730
This new attribute can prevent 'repo sync' from automatically rebasing.
I hit a situation in where one of the git repositories I was tracking
was actually an external repository that I wanted to pull commits
into and merge myself. (NOT rebase, since that would lose the merge
history.) In this case, I'm not using 'repo upload', I'm manually
managing the merges to and from this repository.
Everything was going great until I typed 'repo sync' and it rebased
my manually-merged tree. Hence the option to skip it.
Change-Id: I965e0dd1acb87f4a56752ebedc7e2de1c502dbf8
Occassionally, the content-length may be missing when using urlib
in python 2.6 and 2.7. This change assumes the value of the header is
0 if it doesn't exist
Change-Id: Iaf1c8a796bc667823d4d7c30f9b617644b271d00
This parameter changes the manifest used by 'repo sync' for only
this execution. It should be useful for developers wishing to get
the repo temporarily into a known state, without clobbering their
existing manifest.
Tested by shifting Chrome OS between minilayout and full, and
between several release-builder-generated manifests.
Change-Id: I14194b665195b0e78f368d9ec8b8a83227af2627
If SSH is not available, Gerrit returns NOT_AVAILABLE to the /ssh_info
query made by repo upload. In this case fallback to the /p/$PROJECT URL
that Gerrit also exports and use that for uploads.
Change-Id: I1e3e39ab709ecc0a692614a41a42446426f39c08
This reverts commit ee1c2f5717.
This breaks a lot of buildbot systems. Rolling it back for now
until we can understand what the breakage was and how to fix it.
When repo is trying to figure out branches the repository has by
traversing refs/heads, add exception handling for readline.
Change-Id: If3b2a3720c6496f52f629aa9a2539f186d6ec882
Allows scripts driving repo to know when git failures have
occurred, not just repo internal errors.
Change-Id: Id20fbbb405c35a148e72c87b822da3f3bf93839c
If the user has already configured a workspace, use these values
when re-running 'repo init'.
Otherwise, if the user has global name and e-mail set, use these.
It's always possible to override this and be prompted by specifying
--config-name when running 'repo init'.
Change-Id: If45f0e4b14884071439fb02709dc5cb53f070f60
A default manifest URL can be specified using:
git config --global repo-manifest.<id>.url <url>
A default manifest server can be specified using:
git config --global repo-manifest.<id>.server <url>
A default git mirror reference can be specified using:
git config --global repo-manifest.<id>.reference <path>
This will allow the user to use 'repo init -u <id>' as
a shorter alternative to specifying the full URL.
Also, manifest server will not have to be specified in the
manifest XML and the reference will not have to be specified
on the command line. If they are, they will override these
default values however.
Change-Id: Ifdbc160bd5909ec7df9efb0c5d7136f1d9351754
Signed-off-by: Victor Boivie <victor.boivie@sonyericsson.com>
Several times one have done an upload only to later notice in gerrit
that the upload was done to the wrong branch as the git has not yet
been branched for the current git. This change will make repo print
what the destination branch is when asking the user if she wants to
go through with the upload.
Change-Id: Ia9c3a92a6a04c022edfebf4f8d651ac062bb1f3b
It is common in command line tools to indicate what the default answer
will be if the user simply hits enter. In repo, the display is just
"y/n" with no indication as to which is the default. So change the n
to N in the messages since that is how repo operates.
Change-Id: I81819ae630355072eb0365e59168b0921289498f
