This can take a few seconds, if not a lot more, so add a progress bar
so users understand what's going on.
Change-Id: I5b4b54c1bbb9ec18728f979521310f7087afaa5c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/302802
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The current logic has a downside in that it doesn't sync to the latest
signed version available if the latest commit itself is unsigned. This
can come up when using the "main" branch as it is sometimes signed, but
often not as it's holding the latest merged commits. When people use
the main branch, it's to get early testing on versions tagged but not
yet released, and we don't want them to get stuck indefinitely on that
old version of repo.
For example, this series of events:
* "stable" is at v2.12.
* "main" is tagged with v2.13.
* early testers use --repo-rev main to get v2.13.
* new commits are merged to "main".
* "main" is tagged with v2.14.
* new commits are merged to "main".
* devs who had synced in the past to test v2.13 are stuck on v2.13.
repo sees "main" is unsigned and so doesn't try to upgrade at all.
The only way to get unwedged is to re-run `repo init --repo-rev main`,
or to manually sync once with repo verification disabled, or for us to
leave "main" signed for a while and hope devs will sync in that window.
The new logic is that whenever changes are available, we switch to the
latest signed tag. We also replace some of the duplicated verification
code in the sync command with the newer wrapper logic. This handles a
couple of important scenarios inaddition to above:
* rollback (e.g. v2.13.8 -> v2.13.7)
* do not trash uncommitted changes (in case of ad-hoc testing)
* switch tag histories (e.g. v2.13.8 -> v2.13.8-cr1)
Change-Id: I5b45ba1dd26a7c582700ee3711f303dc7538579b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/300122
Reviewed-by: Jonathan Nieder <jrn@google.com>
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
These are manually kept in sync which is a pain. Have the init
subcmd reuse the wrapper code directly.
Change-Id: Ica73211422c64377bacc9bb3b1d1a8d9d5f7f4ca
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/302762
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
This avoids GIL limitations with using threads for parallel processing.
This reworks the fetch logic to return results for processing in the
main thread instead of leaving every thread to do its own processing.
We have to tweak the chunking logic a little here because multiprocessing
favors batching over returning immediate results when using a larger value
for chunksize. When a single job can be quite slow, this tradeoff is not
good UX.
Bug: https://crbug.com/gerrit/12389
Change-Id: I0f0512d15ad7332d1eb28aff52c29d378acc9e1d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/298642
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Use multiprocessing to run in parallel. When operating on multiple
projects, this can greatly speed things up. Across 1000 repos, it
goes from ~40sec to ~16sec with the default -j8.
The output processing does not appear to be a significant bottle
neck -- it accounts for <1sec out of the ~16sec runtime. Thus we
leave it in the main thread to simplify the code.
Change-Id: I750b72c7711b0c5d26e65d480738fbaac3a69971
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297984
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Use multiprocessing to run in parallel. When operating on multiple
projects, this can greatly speed things up. Across 1000 repos, it
goes from ~10sec to ~4sec with the default -j8.
This only does a simple conversion over to get an easy speedup. It
is currently written to collect all results before displaying them.
If we refactored this module more, we could have it display results
as they came in.
Change-Id: I5caf4ca51df0b7f078f0db104ae5232268482c1c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/298643
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
If the project exists, but the ref the manifest wants doesn't exist,
don't throw an error (and abort the process in general). This can
come up with a partially synced tree: the manifest is up-to-date,
but not all the projects have yet been synced.
Bug: https://crbug.com/gerrit/14289
Change-Id: Iba97413c476544223ffe518198c900c2193a00ed
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/301262
Reviewed-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Tested the code with the following commands.
$ ./run_tests -v
Bug: [google internal] b/183232698
Bug: https://crbug.com/gerrit/13707
$ repo_dev init -u sso://android.git.corp.google.com/platform/manifest -b master --partial-clone --clone-filter=blob:limit=10M --repo-rev=main --use-superproject
$ repo_dev sync --use-superproject
$ repo_dev sync
real 0m8.046s
user 0m2.866s
sys 0m2.457s
Second time repo sync took only 8 seconds and verified by printing that
urrent_branch_only is True in project.py's Sync_NetworkHalf function.
Change-Id: Ic48efb23ea427dfa36e12a5c49973d6ae776d818
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/301182
Tested-by: Raman Tenneti <rtenneti@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
This makes it easy to use --H as a shortcut, and kind of matches the
use of storing HEAD as the revision.
Change-Id: I590bf488518f313e7a593853140316df98262d7e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/301163
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Historically forall has been interactive since it ran in serial.
Recent rework in here dropped that to enable parallel processing.
Restore support for interactive commands when running -j1 or with
an explicit --interactive option.
Bug: https://crbug.com/gerrit/14256
Change-Id: I502007186f771914cfd7830846a4e1938b5e1f38
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/300722
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The refactor to multiprocessing broke status reporting slightly when
checking out projects. Make sure we mark the step as failed if any
of the projects failed, not just when --fail-fast is set.
Change-Id: I0efb56ce83b068b2c334046df3fef23d797599c9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/299882
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Added the following methods to XmlManifest class.
+ GetDefaultGroupsStr() - return 'default,platform-' + platform.system().lower()
+ GetGroupsStr() - Same as gitc_utils.py's _manifest_groups func.
+ Replaced gitc_utils.py's_manifest_groups calls with GetGroupsStr.
+ Used the above methods to get groups in command.py::GetProjects
and part of init.py.
TODO: clean up these funcs to take structured group data more instead
of passing strings around everywhere that need parsing.
Tested the code with the following commands.
$ ./run_tests -v
Tested the sync code by using repo_dev alias and pointing to this CL
and verified prebuilts/fullsdk-linux directory has all the folders.
Tested repo init and repo sync with --use-superproject and without
--use-superproject argument.
$ repo_dev init -u sso://android.git.corp.google.com/platform/manifest -b androidx-main --partial-clone --clone-filter=blob:limit=10M --repo-rev=main --use-superproject
$ repo_dev sync -c -j32
Bug: [google internal] b/181804931
Bug: https://crbug.com/gerrit/13707
Change-Id: Ia98585cbfa3a1449710655af55d56241794242b6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/299422
Reviewed-by: Jonathan Nieder <jrn@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
There's a few rough edges here still, but no known corruption ones,
so open it up a bit for people to experiment with.
Bug: https://crbug.com/gerrit/11486
Change-Id: I81e0122ab6d3e032c546c8239dd4f03740676e80
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/299242
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Superproject objects accept the optional argument “quiet”.
The following progress messages are displayed if quiet is false.
Displayed the following message whenever we find we have to make a new
folder (aka new remote), because if you started with repo init android
and later do googleplex-android that is when it will be slow.
"<location>: Performing initial setup for superproject; this might take
several minutes.".
After fetch completion, added the following notification:
"<location>: Initial setup for superproject completed."
Tested the code with the following commands.
$ ./run_tests -v
Tested the sync code by using repo_dev alias and pointing to this CL.
$ repo_dev init -u persistent-https://googleplex-android.git.corp.google.com/platform/manifest -b rvc-dev --partial-clone --clone-filter=blob:limit=10M --repo-rev=main --use-superproject
Bug: [google internal] b/181178282
Bug: https://crbug.com/gerrit/13707
Change-Id: Ia7fb85c6fb934faaa90c48fc0c55e7f41055f48a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/299122
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
With the recent commit 0501b29e7a
("status: Use multiprocessing for `repo status -j<num>` instead of
threading"), the limitation with project serialization no longer
applies. It turns out that ad-hoc logic is expensive. In the CrOS
checkout (~1000 projects w/8 jobs by default), it adds about ~7sec
overhead to all invocations. With a fast nop run:
time repo forall -j8 -c true
This goes from ~11sec to ~4sec -- more than 50% speedup.
Change-Id: Ie6bcccd21eef20440692751b7ebd36c890d5bbcc
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/298724
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The ProjectArgs function can be inlined which simplifies it quite a
bit. We shouldn't need the custom exception handling here either.
This also makes the next commit easier to review.
Change-Id: If3be04f58c302c36a0f20b99de0f67e78beac141
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/298723
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
This is in preparation for simplifying the jobs support. The nested
function is referenced in the options object which can't be pickled,
so pull it out into a static method instead.
Change-Id: I01d3c4eaabcb8b8775ddf22312a6e142c84cb77d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/298722
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
If a manifest checksout a project multiple times, repo download isn't
able to accurately pick the right project. We were just picking the
first result which could be a bit random for the user. If we hit that
situation, check if the cwd is one of the projects, and if it isn't,
we emit an error and tell the user it's an ambiguous request.
Bug: https://crbug.com/gerrit/13070
Change-Id: Id1059b81330229126b48c7312569b37504808383
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/298702
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Use multiprocessing to run in parallel. When operating on multiple
projects, this can speed things up. Across 1000 repos, it goes from
~9sec to ~5sec with the default -j8.
Change-Id: Ida6dd565db78ff7bac0ecb25d2805e8a1bf78048
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297982
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
This avoids GIL limitations with using threads for parallel processing.
In a CrOS checkout with ~1000 repos, the nop case goes from ~6 sec down
to ~4 sec with -j8. Not a big deal, but shows that this actually works
to speed things up unlike the threading model.
This reworks the checkout logic to return results for processing in the
main thread instead of leaving every thread to do its own processing.
Bug: https://crbug.com/gerrit/12389
Change-Id: I143e5e3f7158e83ea67e2d14e5552153a874248a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/298063
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Use multiprocessing to run in parallel. When operating on multiple
projects, this can greatly speed things up. Across 1000 repos, it
goes from ~30sec to ~3sec with the default -j8.
Change-Id: I0dc62d704c022dd02cac0bd67fe79224f4e34095
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297484
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
This is in preparation for adding jobs support. The nested function
is referenced in the options object which can't be pickled, so pull
it out into a static method instead.
Change-Id: I280ed2bf26390a0203925517a0d17c13053becaa
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297983
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The default sync output should show a progress bar only for successful
commands, and the error output for any commands that fail. Implement
that policy here.
Bug: https://crbug.com/gerrit/11293
Change-Id: I85716032201b6e2b45df876b07dd79cb2c1447a5
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297905
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The idea for skipping some progress updates was to avoid spending
too much time on the progress bar itself. Unfortunately, for large
projects (100s if not 1000s) of repos, we get into the situation
with large/slow checkouts that we skip showing updates when a repo
finishes, but not enough repos finished to increase the percent.
Since the progress bar should be relatively fast compared to the
actual network & local dick operations, have it show an update
whenever the caller requests it. A test with ~1000 repos shows
that the progress bar in total adds <100ms.
Bug: https://crbug.com/gerrit/11293
Change-Id: I708a0c4bd923c59c7691a5b48ae33eb6fca4cd14
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297903
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When people switch to non-default branches, they sometimes want to
switch back to the default, but don't know the exact name for that
branch. Add a -b HEAD shortcut for that.
Change-Id: I090230da25f9f5a169608115d483f660f555624f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297843
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
If --use-superproject is passed as argument to "repo init", then
--use-superproject need not be specified during "repo sync".
Tested the code with the following commands.
$ time repo_dev sync -c -j32
...
WARNING: --use-superproject is experimental and not for general use
Bug: https://crbug.com/gerrit/13709
Bug: https://crbug.com/gerrit/13707
Change-Id: Ibb33f3038a2515f74a6c4f7cb785d354b26ee680
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/298102
Tested-by: Raman Tenneti <rtenneti@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Ian Kasprzak <iankaz@google.com>
Python 3 renamed this method from isSet to is_set.
Change-Id: I8f9bb0b302d55873bed3cb20f2d994fa2d082157
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297742
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Use multiprocessing to run diff in parallel.
Change-Id: I61e973d9c2cde039d5eebe8d0fe8bb63171ef447
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297483
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
This fixes intermingling of parallel jobs and simplifies the code
by switching to subprocess.run. This also provides stable output
in the order of projects by returning the output as a string that
the main loop outputs.
This drops support for interactive commands, but it's unclear if
anyone was relying on that, and the default behavior (-j2) made
that unreliable. If it turns out someone still wants this, we can
look at readding it.
Change-Id: I7555b4e7a15aad336667292614f730fb7a90bd26
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297482
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Use a pool contextmanager to take care of the messy details like
properly cleaning it up when aborting.
Change-Id: I264ebb591c2e67c9a975b6dcc0f14b29cc66a874
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297243
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The status command runs a bunch of jobs in parallel, and each one
is responsible for writing to stdout directly. When running many
noisy jobs in parallel, output can get intermingled. Pass down a
StringIO buffer for writing to so we can return the entire output
as a string so the main job can handle displaying it. This fixes
interleaved output as well as making the output stable: we always
display results in the same project order now. By switching from
map to imap, this ends up not really adding any overhead.
Bug: https://crbug.com/gerrit/12231
Change-Id: Ic18b07c8074c046ff36e306eb8d392fb34fb6eca
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297242
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Extend the Command class to support adding the --jobs option to the
parser if the command declares it supports running in parallel. Also
pull the default value used for the number of local jobs into the
command module so local commands can share it.
Change-Id: I22b0f8d2cf69875013cec657b8e6c4385549ccac
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297024
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Python 3 has a simpler super() style so switch to it to make the
code a little simpler and to stop pylint warnings.
Change-Id: I1b3ccf57ae968d56a9a0bcfc1258fbd8bfa3afee
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297383
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Since the --manifest-url flag is always required when creating a new
checkout, allow the url to be specified via a positional argument.
This brings it a little closer to the `git clone` UI.
Change-Id: Iaf18e794ae2fa38b20579243d067205cae5fae2f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297322
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
We only provide input to GitCommand in one place, so inline the logic
to be more synchronous and similar to subprocess.run. This makes the
code simpler and easier to understand.
Change-Id: Ibe498fedf608774bae1f807fc301eb67841c468b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297142
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Clean up a few linter warnings.
Change-Id: I531d0263a202435d32d83d87ec24998f4051639c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297062
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The code is a bit simpler & easier to reason about.
Change-Id: I149729c7d01434b08b58cc9715dcf0f0d11201c2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297022
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Added --no-use-superproject to repo and init.py to disable use of
manifest superprojects.
Replaced the term "sha" with "commit id".
Added _GetBranch method to Superproject object.
Moved shared code between init and sync into SyncSuperproject function.
This function either does git clone or git fetch. If git fetch fails
it does git clone.
Changed Superproject constructor to accept manifest, repodir and branch
to avoid passing them to multiple functions as argument.
Changed functions that were raising exceptions to return either True
or False.
Saved the --use-superproject option in config as repo.superproject.
Updated internal-fs-layout.md document.
Updated the tests to work with the new API changes in Superproject.
Performance for the first time sync has improved from 20 minutes to
around 15 minutes.
Tested the code with the following commands.
$ ./run_tests -v
Tested the sync code by using repo_dev alias and pointing to this CL.
$ repo init took around 20 seconds longer because of cloning of superproject.
$ time repo_dev init -u sso://android.git.corp.google.com/platform/manifest -b master --partial-clone --clone-filter=blob:limit=10M --repo-rev=main --use-superproject
...
real 0m35.919s
user 0m21.947s
sys 0m8.977s
First run
$ time repo sync --use-superproject
...
real 16m41.982s
user 100m6.916s
sys 19m18.753s
No difference in repo sync time after the first run.
Bug: [google internal] b/179090734
Bug: https://crbug.com/gerrit/13709
Bug: https://crbug.com/gerrit/13707
Change-Id: I12df92112f46e001dfbc6f12cd633c3a15cf924b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/296382
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
We have access to repodir on the command object itself, so we don't
need to pull it indirectly out of the manifest object.
Change-Id: I8688fb1c84979825efa966dc787e78c6f7ba3823
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/296542
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
A little sugar simplifies the code a bit.
Change-Id: Ie2b8a965faa9f9ca05c7be479d03e8e073cd816d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/296522
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Changed "git pull" to "git fetch" as we are using --bare option. Used the
following command to fetch:
git fetch origin +refs/heads/*:refs/heads/* --prune
Pass --branch argument to Superproject's UpdateProjectsRevisionId function.
Returned False/None when directories don't exist instead of raise
GitError exception from _Fetch and _LsTree functions. The caller of Fetch
does Clone if Fetch fails.
Tested the code with the following commands.
$ ./run_tests -v
Tested the init and sync code by copying all the repo changes into my Android
AOSP checkout and running repo sync with --use-superproject option.
Bug: https://crbug.com/gerrit/13709
Bug: https://crbug.com/gerrit/13707
Tested-by: Raman Tenneti <rtenneti@google.com>
Change-Id: I3e441ecdfc87c735f46eff0eb98efa63cc2eb22a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/296222
Reviewed-by: Mike Frysinger <vapier@google.com>
After updating all project’s revsionIds with the SHAs from superproject,
write the updated manifest into superproject_override.xml file. Reload
that file for future Reloads. This file is created in exp-superproject
directory.
Moved most of the code that is superproject specific into
git_superproject.py and wrote test code.
If git pull fails, did a git clone of the superproject.
We saw performance gains for consecutive repo sync's. The time to sync
went down from around 120 secs to 40 secs when repo sync is executed
consecutively.
Tested the code with the following commands.
$ ./run_tests -v tests/test_git_superproject.py
$ ./run_tests -v
Tested the sync code by copying all the repo changes into my Android
AOSP checkout and doing a repo sync --use-superproject twice.
First run
$ time repo sync --use-superproject
...
real 21m3.745s
user 97m59.380s
sys 19m11.286s
After two consecutive sync runs
$ time repo sync -c -j8 --use-superproject
real 0m39.626s
user 0m29.937s
sys 0m38.155s
Bug: https://crbug.com/gerrit/13709
Bug: https://crbug.com/gerrit/13707
Tested-by: Raman Tenneti <rtenneti@google.com>
Change-Id: Id79a0d7c4d20babd65e9bd485196c6f8fbe9de5e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/296082
Reviewed-by: Ian Kasprzak <iankaz@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
Added "--use-superporject" option to sync.py to fetch project SHAs from
superproject. If there are any missing projects in superprojects, it
prints the missing entries and exits. If there are no missing entries,
it will use SHAs from superproject to fetch the projects from git.
Tested the code with the following commands.
$ ./run_tests tests/test_manifest_xml.py
$ ./run_tests -v tests/test_git_superproject.py
$ ./run_tests -v
Tested the sync code by copying all the repo changes into my Android
AOSP checkout and adding <superporject> tag to default.xml. With
local modification to the code to print the status,
.../WORKING_DIRECTORY$ repo sync --use-superproject
repo: executing 'git clone' url: sso://android/platform/superproject
repo: executing 'git ls-tree'
Success: []
Bug: https://crbug.com/gerrit/13709
Tested-by: Raman Tenneti <rtenneti@google.com>
Change-Id: Id18665992428dd684c04b0e0b3a52f46316873a0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/293822
Reviewed-by: Mike Frysinger <vapier@google.com>
We're committed to Python 3 at this point, so purge all the
is_python3 related dynamic checks.
Bug: https://crbug.com/gerrit/10418
Change-Id: I4c8b405d6de359b8b83223c9f4b9c8ffa18ea1a2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/292383
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
