This helps with people tracing repo/git execution. We use a similar
format to git, but a little simpler since we always initialize the
env var setting, and we want to avoid too much overhead.
Bug: https://crbug.com/gerrit/12314
Change-Id: I75675b6cc4c6f7c4f5e09f54128eba9456364d04
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254331
Reviewed-by: Josh Steadmon <steadmon@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
We import the wrapper on the fly, so minimize how much code we run
in module scope. It's pointless/wasted when importing.
Change-Id: I4a71c2030325d0a639585671cd7ebe8f22687ecd
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254072
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Reviewed-by: Mike Frysinger <vapier@google.com>
We were perhaps a bit too hasty to jump to git-2.10. Existing LTS
releases of Ubuntu are quite old still: Trusty has 1.9 while Xenial
has 2.5. While we plan on dropping support for those eventually as
we migrate to Python 3.6, we don't need to be so strict just yet on
the git versions.
We also want to disconnect the version the repo launcher requires
from the version the rest of the source tree requires. The repo
launcher doesn't need as many features, and being flexible there
allows us more freedom to upgrade & rollback as needed.
So we'll allow git-1.7 again, but start warning on any users older
than git-1.9. This aligns better with existing LTS releases, and
gives users a chance to start upgrading before we cut them off.
Change-Id: I140305dd8e42c9719c84e2aee0dc6a5c5b18da25
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254573
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
We want to start warning about Python 2 usage, but we can't do it
simply because the shebang is /usr/bin/python which might be an old
version like python2.7.
We can't change the shebang because program name usage is spotty at
best: on some platforms (like macOS), it's not uncommon to not have
a `python3` wrapper, only a major.minor one like `python3.6`. Using
python3 wouldn't guarantee a new enough version of Python 3 anyways,
and we don't want to require Python 3.6 exactly, just that minimum.
So we check the current Python version. If it's older than the ver
of Python 3 we want, we search for a `python3.X` version to run. If
those don't work, we see if `python3` exists and is a new enough ver.
If it's not, we die if the current Python 3 is too old, and we start
issuing warnings if the current Python version is 2.7. This should
allow the user to take a bit more action by installing Python 3 on
their system without having to worry about changing /usr/bin/python.
Once we require Python 3 completely, we can simplify this logic a bit
by always bootstrapping up to Python 3 and failing with Python 2.
We have a few KI with Windows atm though, so keep it disabled there
until the fixes are merged.
Bug: https://crbug.com/gerrit/10418
Change-Id: I5e157defc788e31efb3e21e93f53fabdc7d75a3c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/253136
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
The git-2.10 series was released in 2016. Since we're moving to
require Python 3.6 which was also released in 2016, bumping up the
git version seems reasonable. Also we don't really test any git
versions close to as old as 1.7.2 which was released in 2010.
Change-Id: Ib71b714de6cd0b7dd50d0b300b108a560ee27331
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/253134
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
This hasn't been used in many years to sign a release, so drop it
from the keyring to avoid confusing people.
Bug: https://crbug.com/gerrit/12229
Change-Id: Ifca7eee713d167c11f32252975724e5858e4c007
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/253133
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
This reflects the transition to the new 2.x series which will be
migrating to Python 3-only.
Bug: https://crbug.com/gerrit/10418
Change-Id: I6355ac955d26b930f8a3721d3526eec5bed92400
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/253132
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
In order to be able to use "--no-repo-verify" to work around an issue with
gpg-agent and long socket paths (see e.g. [1]), this change avoids GPG
being set up at all if that option is passed.
[1] https://github.com/elastic/elasticsearch/issues/17053
Change-Id: I1e5cbd8be2dc0084f12afe0ca33c789fdbc6fef9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/251108
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Use open() as a context manager to simplify the close logic and make
the code easier to read & understand. This is also more Pythonic.
Change-Id: I579d03cca86f99b2c6c6a1f557f6e5704e2515a7
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/244734
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
We've rolled quite a number of fixes since the last update, including
a lot of Python 3 improvements. Lets bump the wrapper version for it.
Change-Id: I6c6c04c3c8241bf8e8bcf26603549ae4595fede8
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/237812
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
We use subprocess a lot in the wrapper, but we don't always read
or write the streams directly. When we do, make sure we convert
to/from bytes before trying to use the content.
Change-Id: I318bcc8e7427998348e359f60c3b49e151ffbdae
Reported-by: Michael Scott <mike@foundries.io>
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/236612
Reviewed-by: Michael Scott <mike@foundries.io>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Michael Scott <mike@foundries.io>
A new option, --partial-clone is added to 'repo init' which tells repo
to utilize git's partial clone functionality, which reduces disk and
bandwidth usage when downloading by omitting blob downloads initially.
Different from restricting clone-depth, the user will have full access
to change history, etc., as the objects are downloaded on demand.
Change-Id: I60326744875eac16521a007bd7d5481112a98749
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/229532
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Xin Li <delphij@google.com>
This should help people get some bearings in the codebase.
Change-Id: I951238fe617a3ecb04a47ead3809ec72c8fbf5a1
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/231232
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
All code that calls ParseGitVersion needs to run `git --version`
itself and parse the output before passing it in. To avoid that
duplication, allow ParseGitVersion to run `git --version` itself
if ver_str=None.
Bug: https://crbug.com/gerrit/11144
Change-Id: Ie07793ca57a40c0231af808df04a576118d5eea3
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/231054
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
We were returning an e.g. tuple(1,2,3), but that strips off the full
version string which we might want in some places e.g. '1.2.3-rc3'.
Change the return value to a namedtuple so we can pass back up the
full version string. For code doing a compare with three elements
(all code today), things still work fine as the namedtuple will DTRT
in this scenario.
Bug: https://crbug.com/gerrit/11144
Change-Id: Ib897b5df308116ad1550b0cf18f49afeb662423e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/231053
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Python 3 returns bytes by default with urlopen. Adjust our code to
handle that scenario and decode as necessary.
Bug: https://crbug.com/gerrit/10418
Change-Id: Icf4cd80e7ef92d71a3eefbc6113f1ba11c32eebc
We avoided this future import because Python 2.4 & 2.5 did not
support it. We've dropped support for Python 2.6 at this point,
and those versions are long dead. Since this workaround adds a
bit of complexity to the codebase, drop it. Considering we are
not running any actual tests against older versions, there's no
sense in trying to support them anymore.
Change-Id: Icda874861e8a8eb4fa07c624a9e7c5ee2a0da401
There's no reason to support any other encoding in these files.
This only affects the files themselves and not streams they open.
Bug: https://crbug.com/gerrit/10418
Change-Id: I053cb40cd3666ce5c8a0689b9dd938f24ca765bf
Standard utilities exit normally/zero when users explicitly request
--help, and they write to stdout. Exiting non-zero & using stderr
is meant for incorrect tool usage instead. We're already doing this
for `repo help <init|gitc-init>` calls, so lets fix `repo help` and
`repo --help|-h` to match.
Change-Id: Ia4f352b431c91eefef70dcafc11f00209ee69809
"repo init --reference" has two purposes: to decrease bandwidth used
at clone time, and to decrease disk usage afterward, by using the
reference repositories as an alternate store of objects even after
the clone. The downside is that it makes the borrowing repositories
dependent on the reference repositories, so it is easy to end up
with missing objects by mistake after a cleanup operation like "git
gc".
To prevent that, v2.3.0-rc0~30^2 (clone: --dissociate option to mark
that reference is only temporary, 2014-10-14), "git clone" gained a
--dissociate option that makes --reference reuse objects from the
reference repository at clone time but copy them over instead of
using the reference as an alternate. This is more straightforward to
use than plain --reference, at the cost of higher disk usage.
Introduce a --dissociate to "repo init" that brings the same benefits
to repo. The option is simply passed on to "git clone".
Change-Id: Ib50a549eb71e0a2b3e234aea57537923962a80d4
pylint is not used since bb5b1a0. The pyflakes cleanup mentioned in that
commit has not been done, but given that this project is no longer being
actively developed I don't think it's worth spending time doing it.
Leaving the pylint suppressions causes confusion because it leads people
to think that we are still using pylint.
Change-Id: If7d9f280a0f408c780f15915ffdb80579ae21f69
Commit 27226e742d introduced a warning if
"repo" is not part of the bootstrapped REPO_URL. However, that check was
done too early, directly after the call to _Clone. As the _Clone function
does not actually clone but it only initializes and fetches, the check
needs to be moved to after the call to _Checkout.
To reproduce, call
repo init --no-clone-bundle --repo-branch=master -u https://android.googlesource.com/platform/manifest
which will currently always show the (bogus) warning message. With this
fix, the warning will only be shown if "repo" indeed does not exist.
While at it, also slightly improve the code by using os.path.join().
Change-Id: Ied89e24231addabab6075005065748df1ffa74c4
While on Linux stderr is unbuffered, it is buffered on Windows. Always
flush stderr on Windows to ensure any error messages appear in the right
order to ease diagnosing.
Change-Id: I37300e384ecd3a51a321a48818f0114d6f3357a0
See http://stackoverflow.com/questions/7004687/os-exec-on-windows:
execv on Windows does not behave as on Linux, i.e. a new process is
spawned and the parent process terminates right away, which makes the
shell prompt come back too soon.
Change-Id: I1f8d23208765988629f081e9b949c67cf71c08ae
repo sync can sync submodules via the --fetch-submodules option.
However, if the manifest repo has submodules, those will not be synced.
Having submodules in the manifest repo -- while not commonly done -- can
be useful for inheriting a manifest from another project using <include>
and layering changes on top of it. In this way, you can avoid having to
deal with merge conflicts between your own manifests and the other
project's manifests (for example, if you're managing an Android fork).
Add a --submodule option to init that automatically syncs the submodules
in the manifest repo whenever the manifest repo changes.
Change-Id: I45d34f04517774c1462d7f233f482d1d81a332a8
Signed-off-by: Martin Kelly <mkelly@xevo.com>
If you don't know that the url to git-repo itself can be overridden via
REPO_URL, it's hard to debug cases where REPO_URL is accidentally set to
another repository, e.g. inside a Jenkins CI job. What makes is even
harder is that the ".repo/repo" directory gets silently removed in such
cases as verifications fails, which makes it impossible to look at the
cloned files to understand the problem.
To better protect against such an issue, warn if the cloned git-repo
repository does not contain a top-level "repo" file, and state that the
".repo/repo" directory will be removed in case of a clone failure.
Change-Id: I697b4999205a5967910c0237772ccaada01e74d4
There have been a number of changes in the repo wrapper since the last
increment that was done in fee390ee:
- 9711a98 init: Add --no-clone-bundle option
- 631d0ec Support non-ASCII GNUPGHOME environment variable
- 4088eb4 repo: Cleaned up pylint/pep8 violations
- 5553628 repo: Add check of REPO_URL env variable
- 745b4ad Fix gitc-init behavior
- d3ddcdb Ignore clone.bundle on HTTP 501, i.e. Not Implemented
Change-Id: I3f763ef0ec2df2d726dff429021b48ad474148f1
I noticed when running pylint (as the SUBMITTING_PATCHES file directs)
that there were a number of violations reported. This makes it difficult
to see violations I might have introduced. This commit corrects all
pylint violations in the repo script.
First I ran this to clean up the formatting:
autopep8 --max-line-length=80 --indent-size 2 repo
Following that the following violations remained:
% pylint --rcfile=.pylintrc repo
************* Module repo
W:220,21: Redefining name 'init_optparse' from outer scope (line 156)
(redefined-outer-name)
W:482, 2: No exception type(s) specified (bare-except)
C:704, 0: Old-style class defined. (old-style-class)
For line 220, the parameter to _GitcInitOptions was renamed so as not to
mask the init_optparse global.
For line 482, a pylint directive was added to disable the bare-execpt
violation for just that line.
For line 704, the _Options class was changed to subclass object.
Additionally, the comments at lines 107-113 were spaced out to line up
with the comment at line 112 that autopep8 moved.
This script now has a pylint score of 10.0
Change-Id: I779b66eb6b061a195d3c4372b99dec1b6d2a214f
We want to be able to run repo on a system that is not connected to
the Internet and cannot access https://gerrit.googlesource.com. We
can put a clone of that repos there, but would prefer to use the
stable version of the repo script instead of a locally modified
version.
This commit adds a check for the REPO_URL environment variable. If
that is set and not empty its value will be set in the REPO_URL
global in repo. Otherwise the standard path will be used.
Change-Id: I0616f5f81ef75f3463b73623b892cb5eed6bb7ba
With gitc-init, a gitc client may be specified using '-c'. If we're
not currently in that client, we need to change directories so that
we don't affect the local checkout, and to ensure that repo is
checked out in the new client.
This also makes '-c' optional if already in a gitc client, to match
the rest of the init options.
Change-Id: Ib514ad9fd101698060ae89bb035499800897e9bd
If the clone.bundle is out of date, repo may be installed with an old
version. It will upgrade with the next sync a day later, or when "repo
selfupdate" is run.
This behavior was added to normal project downloads, but was never added
to the repo launcher.
Change-Id: Ib04bef3a658c98fe1b6c53b3e8d0067165a5e3f7
Updates the repo launcher and gitc_utils to pull the manifest
directory location out of the gitc config file.
Change-Id: Id08381b8a7d61962093d5cddcb3ff6afbb13004b
Adds the new gitc-init command to set up a GITC client. Gitc-init
sets up the client directory and calls repo init within it. Once
the repo is initialized, then generates a GITC manifest file
by using git ls-remote on each project and retrieving the HEAD SHA
to use as the revision attribute.
Gitc-init inherits from and has all the options as repo init.
Change-Id: Icd7e47e90eab752a77de7c80ebc98cfe16bf6de3
