This commit supports for the 'remote' attribute in
<extend-project>. This avoids the need to perform a <remove-project>
followed by a <project> in local manifests.
Change-Id: I9f9347913337ec9d159bc264d15ce97881ae5398
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/253092
Tested-by: Kyunam Jo <kyunam.jo@gmail.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Reject paths in <copyfile> & <linkfile> that try to use symlinks or
non-file or non-dirs.
We don't fully validate <linkfile> when src is a glob as it's a bit
complicated -- any component in the src could be the glob. We make
sure the destination is a directory, and that any paths in that dir
are created as symlinks. So while this can be used to read any path,
it can't be abused to write to any paths.
Bug: https://crbug.com/gerrit/11218
Change-Id: I68b6d789b5ca4e43f569e75e8b293b3e13d3224b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/233074
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Reject paths in <copyfile> & <linkfile> that point outside of their
respective scopes. This validates paths while parsing the manifest
as this should be quick & cheap: we don't access the filesystem as
this code runs before we've synced.
Bug: https://crbug.com/gerrit/11218
Change-Id: I8e17bb91f3f5b905a9d76391b29fbab4cb77aa58
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/232932
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Michael Mortensen <mmortensen@google.com>
A new option, --partial-clone is added to 'repo init' which tells repo
to utilize git's partial clone functionality, which reduces disk and
bandwidth usage when downloading by omitting blob downloads initially.
Different from restricting clone-depth, the user will have full access
to change history, etc., as the objects are downloaded on demand.
Change-Id: I60326744875eac16521a007bd7d5481112a98749
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/229532
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Xin Li <delphij@google.com>
This takes a single argument (the error message), not multiple
arguments that get formatted implicitly.
Change-Id: Idfbc913ea9f93820edb7e955e9e4f57618c8cd1b
There's no reason to support any other encoding in these files.
This only affects the files themselves and not streams they open.
Bug: https://crbug.com/gerrit/10418
Change-Id: I053cb40cd3666ce5c8a0689b9dd938f24ca765bf
The current implementation ignores the user-specified paths to
manifests. if the "repo diffmanifests" is invoked with absolute
file paths for one or both manifests, the command fails with message:
fatal: duplicate path ... in /tmp/manifest-old.xml
Also the current implementation fails to expand the absolute path to
manifest files if "repo diffmanifests" is invoked with relative
paths, i.e "repo diffmanifests manifest-old.xml manifest-new.xml".
fatal: manifest manifest-old.xml not found
This commit fixes the first issue by disabling the local manifest
discovery for diffmanifests command, and the second issue by
expanding paths to manifests within "diffmanifests" sub-command.
Test: repo manifest --revision-as-HEAD -o /tmp/manifest-old.xml
repo sync
repo manifest --revision-as-HEAD -o /tmp/manifest-new.xml
repo diffmanifests /tmp/manifest-old.xml /tmp/manifest-new.xml
Change-Id: Ia125d769bfbea75adb9aba81abbd8c636f2168d4
Signed-off-by: Vasyl Gello <vasek.gello@gmail.com>
* Add more file i/o wrappers in platform_utils to allow using
long paths (length > MAX_PATH) on Windows.
* Paths using the long path syntax ("\\?\" prefix) should never
escape the platform_utils API surface area, so that this
specific syntax is not visible to the rest of the repo code base.
* Forward many calls from os.xxx to platform_utils.xxx in various place
to ensure long paths support, specifically when repo decides to delete
obsolete directories.
* There are more places that need to be converted to support long paths,
this commit is an initial effort to unblock a few common use cases.
* Also, fix remove function to handle directory symlinks
Change-Id: If82ccc408e516e96ff7260be25f8fd2fe3f9571a
pylint is not used since bb5b1a0. The pyflakes cleanup mentioned in that
commit has not been done, but given that this project is no longer being
actively developed I don't think it's worth spending time doing it.
Leaving the pylint suppressions causes confusion because it leads people
to think that we are still using pylint.
Change-Id: If7d9f280a0f408c780f15915ffdb80579ae21f69
It's convenient to set upstream for all projects in a manifest instead of
repeating the same value for each project.
Change-Id: I946b1de4efb01b351c332dfad108fa7d4f443cba
This change adds support for the 'revision' attribute in
<extend-project>. This avoids the need to perform a <remove-project>
followed by a <project> in local manifests.
Change-Id: Id2834fcfc1ae0d74b3347bed3618f250bf696b1f
Allow the 'default' and 'project' element in the manifest
file to apply "--no-tags" option equivalent.
Change-Id: I7e0f8c17a0e25cca744d45df049076d203c52ff5
Signed-off-by: YOUNG HO CHA <ganadist@gmail.com>
os.remove raises an exception when deleting read-only files on
Windows. Replace all calls with calls to platform_utils.remove,
which deals with deals with that issue.
Change-Id: I4dc9e0c9a36b4238880520c69f5075eca40f3e66
Replace all calls to os.symlink with platform_utils.symlink.
The Windows implementation calls into the CreateSymbolicLinkW Win32
API, as os.symlink is not supported.
Separate the Win32 API definitions into a separate module
platform_utils_win32 for clarity.
Change-Id: I0714c598664c2df93383734e609d948692c17ec5
repo sync can sync submodules via the --fetch-submodules option.
However, if the manifest repo has submodules, those will not be synced.
Having submodules in the manifest repo -- while not commonly done -- can
be useful for inheriting a manifest from another project using <include>
and layering changes on top of it. In this way, you can avoid having to
deal with merge conflicts between your own manifests and the other
project's manifests (for example, if you're managing an Android fork).
Add a --submodule option to init that automatically syncs the submodules
in the manifest repo whenever the manifest repo changes.
Change-Id: I45d34f04517774c1462d7f233f482d1d81a332a8
Signed-off-by: Martin Kelly <mkelly@xevo.com>
repo already special-cases sso:// URLs to behave similarly to https://
and rpc:// elsewhere in repo, but it forgot to do so here.
Noticed when trying to use relative URLs in a manifest obtained using
an sso:// URL.
Change-Id: Ia11469a09bbd6e444dbc4f22c82f9bbe9f5fd083
Allow the 'remote' element in the manifest file to define an optional
'pushurl' attribute which is passed into the .git/config file.
Change-Id: If342d299d371374aedc4440645798888869c9714
Signed-off-by: Steve Rae <steve.rae@raedomain.com>
When the alias attribute is set for a remote, the RemoteSpec attached to
a Project only contains the alias name used by git, not the original
name used in the manifest. But that's not enough information to
reconstruct the manifest, so save off the original manifest name as
another RemoteSpec parameter, only used to write the manifest out.
Bug: Issue 181
Bug: Issue 219
Change-Id: Id7417dfd6ce5572e4e5fe14f22924fdf088ca4f3
This way any changes made to the main manifest are reflected in the gitc
manifest. It's also necessary to use both manifests to sync since the
information required to update the gitc manifest is actually in the repo
manifest.
This also fixes a few issues that came up when testing. notdefault
groups weren't being saved to the gitc manifest in a method that matched
'sync'. The merge branch wasn't always being set to the correct value
either.
Change-Id: I435235cb5622a048ffad0059affd32ecf71f1f5b
This way any changes made to the main manifest are reflected in the gitc
manifest. It's also necessary to use both manifests to sync since the
information required to update the gitc manifest is actually in the repo
manifest.
This also fixes a few issues that came up when testing. notdefault
groups weren't being saved to the gitc manifest in a method that matched
'sync'. The merge branch wasn't always being set to the correct value
either.
Change-Id: I5dbc850dd73a9fbd10ab2470ae4c40e46ff894de
Updates the repo launcher and gitc_utils to pull the manifest
directory location out of the gitc config file.
Change-Id: Id08381b8a7d61962093d5cddcb3ff6afbb13004b
Add repo start support for GITC checkouts. If the user is in
the GITC FS view, they can now run repo start to check out
the sources and create a new working branch.
When "repo start" is called on a GITC project, the revision
tag is set to an empty string and saved in a new tag:
old-revision. This tells the GITC filesystem to display the
local copy of the sources when being viewed. The local copy
is created by pulling the project sources and the new branch
is created based off the original project revision.
Updated main.py to setup each command's gitc_manifest when
appropriate.
Updated repo sync's logic to sync opened projects and
updating the GITC manifest file for the rest.
Change-Id: I7e4809d1c4fc43c69b26f2f1bebe45aab0cae628
This argument wasn't being copied, which caused syncs from generated
manifests to pull down too much of the git history.
Change-Id: I269bab788d4557267c081628b3f8c6aec7744e81
Previously, in running the `manifest` command, we wouldn't output the
upstream if the default upstream would include the pinned sha1.
However, now that fetching refs/heads/* doesn't guarantee that we will
have the sha1, we need to always output the specified upstream branch.
Change-Id: Ib8b409a8ecd439397b38ee9649c530407797f841
Previously, we used a regex that would only remove a phony string from
a url if it existed, but we recently replaced that with a slice. This
change goes back to the previous behavior.
Change-Id: I8baf527be01c4b49d45b903b31a1cd6315563d5b
Instead of using regex, append the netloc and relative
scheme lists with the custom scheme.
The schemes will only be appended when needed, instead
of passing X amount of regex replaces.
see http://bugs.python.org/issue18828 for more details.
Change-Id: I10d26d5ddc32e7ed04c5a412bdd6e13ec59eb70f
This reverts commit 38e4387f8e.
A "repo init" followed by "repo sync" is meant to be as safe as
"git clone". In particular it should not run arbitrary code provided
by the manifest owner.
It would still be nice to have support for manifest-defined git hooks
--- they'd just need a prompt like the upload RepoHook has. Hopefully
a later change can bring them back.
Change-Id: I5ecd90fb5c2ed64f103d856d1ffcba38a47b062d
Signed-off-by: Jonathan Nieder <jrn@google.com>
When working within a team or corporation it is often
useful/required to use predefined git templates. This
change teaches repo to use a per-remote git hook template
structure.
The implementation is done as a continuation of the
existing projecthook functionality. The terminology is
therefore defined as projecthooks.
The downloaded projecthooks are stored in the .repo
directory as a metaproject separating them from the users
project forest.
The projecthooks are downloaded and set up when doing a
repo init and updated for each new repo init.
When downloading a mirror the projecthooks gits are
not added to the bare forest since the intention is to
ensure that the latest are used (allows for company policy
enforcement).
The projecthooks are defined in the manifest file in the
remote element as a subnode, the name refers to the
project name on the server referred to in the remote.
<remote name="myremote ..>
<projecthook name="myprojecthookgit" revision="myrevision"/>
</remote>
The hooks found in the projecthook revision supersede
the stock hooks found in repo. This removes the need for
updating the projecthook gits for repo stock hook changes.
Change-Id: I6796b7b0342c1f83c35f4b3e46782581b069a561
Signed-off-by: Patrik Ryd <patrik.ryd@stericsson.com>
Signed-off-by: Ian Kumlien <ian.kumlien@gmail.com>
'upstream' attribute is now transferred to the new manifest xml
that is created when using command 'repo manifest -o -'.
Manifest help is updated for the attributes 'sync-c','sync-s' and
'sync-j'.
Bug: Issue 164
Change-Id: If63f781e91d25c5b5b5ea0696b0c04337b0a686a
Currently, if a local manifest wants to add groups to an existing
project, it must use remove-project and then re-add the project with
the new groups. This makes the local manifest more fragile, requiring
updates to the local manifest if the original manifest changes.
Add a new extend-project tag, which supports adding groups to an
existing project.
Change-Id: Ib4d1352efd722a65dd263d02644b9ea5ab6ed400
Some projects use multiple remotes.
In some cases these remotes have different naming conventions.
Add an option to define a revision in the remote configuration.
The `project` revision takes precedence over `remote` and `default`.
The `remote` revision takes precedence over `default`.
The `default` revision acts as a fall back as it originally did.
Change-Id: I2b376160d45d48b0bab840c02a3eef1a1e32cf6d
dict.keys() produces a dict_keys object in Python 3, which does
not support .sort(). Use sorted() which will give the same outcome.
Change-Id: If6b33db07a31995b4e44959209d08d8fb74ae339
dict.values() produce dict_values objects rather than list objects.
Convert this to a list to maintain functionality with certain functions.
Change-Id: Ie76269e19f8d68479a1d7ae03aa965252d759a9e
It's just like copyfile and runs at the same time as copyfile but
instead of copying it creates a symlink instead. This is needed
because copyfile copies the target of the link as opposed to the
symlink itself.
Change-Id: I7bff2aa23f0d80d9d51061045bd9c86a9b741ac5
Commit 8d201 "repo: Support multiple branches for the same project."
(Change id is I5e2f4e1a7abb56f9d3f310fa6fd0c17019330ecd) caused missing
mirroring manifest repository when 'repo sync' after 'repo init --mirror'.
When the function _AddMetaProjectMirror() is called to add two of
meta projects - git-repo itself and manifest repository to mirror,
it didn't add them into self._paths which has list of projects to be
sync'ed by 'repo sync'.
In addition, because member var of Project 'relpath' is used as a key
of self._paths, it should be set with proper value other than None.
Since this is only for meta projects which are not described in manifest
xml, 'relpath' is name of the projects.
Change-Id: Icc3b9e6739a78114ec70bf54fe645f79df972686
Signed-off-by: Kwanhong Lee <kwanhong.lee@windriver.com>
This command allows a deeper diff between two manifest projects.
In addition to changed projects, it displays the logs of the
commits between both revisions for each project.
Change-Id: I86d30602cfbc654f8c84db2be5d8a30cb90f1398
Signed-off-by: Julien Campergue <julien.campergue@parrot.com>
Previously, we would remove 'persistent-' then tack it on at the end
if it had been previously found. However, this would ignore urljoin's
decision on whether or not the second path was relative. Instead, we
were always assuming it was relative and that we didn't want to use
a different absolute url with a different protocol.
This change handles persistent-https:// in the same way we handled the
absense of an explicit protocol. The only difference is that this time
instead of temporarily replacing it with 'gopher://', we use 'wais://'.
Change-Id: I6e8ad1eb4b911931a991481717f1ade01315db2a
In CL:50715, I updated repo to handle multiple projects, but the
remove-projects code path was not updated accordingly. Update it.
Change-Id: Icd681d45ce857467b584bca0d2fdcbf24ec6e8db
This significantly reduces sync time and used brandwidth as only
a tar of each project's revision is checked out, but git is not
accessible from projects anymore.
This is relevant when git is not needed in projects but sync
speed/brandwidth may be important like on CI servers when building
several versions from scratch regularly for example.
Archive is not supported over http/https.
Change-Id: I48c3c7de2cd5a1faec33e295fcdafbc7807d0e4d
Signed-off-by: Julien Campergue <julien.campergue@parrot.com>
