New vs existing project may be a useful measure for analyzing
sync performance.
Bug: b/287105597
Change-Id: Ibea3e90c9fe3d16fd8b863bcae22b21963a6771a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/377574
Tested-by: Jason Chang <jasonnc@google.com>
Reviewed-by: Joanna Wang <jojwang@google.com>
By chance, _sync_dict can be empty even though repo sync is still
working. In that case, the progress message shows incorrect info. Handle this case and fix a bug where "0 jobs" can show.
Bug: http://b/284465096
Change-Id: If915d953ba60e7cf84a6fb2d137fd6ed82abd3cc
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/375494
Tested-by: Gavin Mak <gavinmak@google.com>
Reviewed-by: Josip Sokcevic <sokcevic@google.com>
Commit-Queue: Gavin Mak <gavinmak@google.com>
It's possible that number of jobs is more than 0 when we
check length, but in the meantime number of jobs drops to
0. In that case, we are working with float(inf) which
causes other problems
Bug: 284383869
Change-Id: I5d070d1be428f8395df7fde8ca84866db46f2100
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/375134
Reviewed-by: Mike Frysinger <vapier@google.com>
Commit-Queue: Josip Sokcevic <sokcevic@google.com>
Tested-by: Josip Sokcevic <sokcevic@google.com>
Reviewed-by: Gavin Mak <gavinmak@google.com>
An investigation go/git-repo-shallow shows a number of problems
when doing a shallow git fetch/clone. This change introduces an
environment variable REPO_ALLOW_SHALLOW. When this environment variable
is set to 1 during a repo init or repo sync all shallow git fetch
commands are replaced with partial fetch commands. Any shallow
repository needing update is unshallowed. This behavior continues until
a subsequent repo sync command is run with REPO_ALLOW_SHALLOW set to 1.
Bug: b/274340522
Change-Id: I1c3188270629359e52449788897d9d4988ebf280
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/374754
Reviewed-by: Josip Sokcevic <sokcevic@google.com>
Tested-by: Jason Chang <jasonnc@google.com>
Last of the recent `repo sync` UX changes. Show number of fetch jobs eg:
"Fetching: 3% (8/251) 0:03 | 8 jobs | 0:01 chromiumos/overlays/chrom.."
Bug: https://crbug.com/gerrit/11293
Change-Id: I1b3dcf3e56ae6731c6c6cb73cfce069b2f374b69
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/374920
Reviewed-by: Josip Sokcevic <sokcevic@google.com>
Commit-Queue: Gavin Mak <gavinmak@google.com>
Tested-by: Gavin Mak <gavinmak@google.com>
Reviewed-by: Joanna Wang <jojwang@google.com>
Change-Id: I91b99a7147c7c3cb5485d5406316c8ffd79f9272
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/374914
Commit-Queue: Josip Sokcevic <sokcevic@google.com>
Reviewed-by: Joanna Wang <jojwang@google.com>
Tested-by: Josip Sokcevic <sokcevic@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
"Last synced: X" is printed only after a project finishes syncing.
Replace that with a message that shows the longest actively syncing
project.
Bug: https://crbug.com/gerrit/11293
Change-Id: I84c7873539d84999772cd554f426b44921521e85
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/372674
Reviewed-by: Josip Sokcevic <sokcevic@google.com>
Commit-Queue: Gavin Mak <gavinmak@google.com>
Reviewed-by: Joanna Wang <jojwang@google.com>
Tested-by: Gavin Mak <gavinmak@google.com>
Trace logs emitted from repo are not useful on error for many critical
commands. This change adds errors for critical commands to trace logs.
Change-Id: Ideb9358bee31e540bd84a94327a09ff9b0246a77
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/373814
Reviewed-by: Joanna Wang <jojwang@google.com>
Tested-by: Josip Sokcevic <sokcevic@google.com>
Commit-Queue: Josip Sokcevic <sokcevic@google.com>
Reviewed-by: Gavin Mak <gavinmak@google.com>
Give users an indication that `repo sync` isn't stuck if taking a long
time to fetch.
Bug: https://crbug.com/gerrit/11293
Change-Id: Iccdaec918f86c9cc2db5dc12f9e3eef7ad0bcbda
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/371414
Tested-by: Gavin Mak <gavinmak@google.com>
Reviewed-by: Josip Sokcevic <sokcevic@google.com>
Reviewed-by: Joanna Wang <jojwang@google.com>
Commit-Queue: Gavin Mak <gavinmak@google.com>
Apply rules set by https://gerrit-review.googlesource.com/c/git-repo/+/362954/ across the codebase and fix any lingering errors caught
by flake8. Also check black formatting in run_tests (and CQ).
Bug: b/267675342
Change-Id: I972d77649dac351150dcfeb1cd1ad0ea2efc1956
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/363474
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Gavin Mak <gavinmak@google.com>
Commit-Queue: Gavin Mak <gavinmak@google.com>
dest_branch.
- This still prevents the case mentioned here:
https://gerrit-review.googlesource.com/c/50300
while also supporting dest_branch.
- Update _GetMergeBranch to get merge branches for any branch, not just
the one we happen to run `repo upload` in. (e.g. for uploading multiple
branches)
Bug: b/27955930
Change-Id: Ia8ee1d6a83a783c984bb2eb308bb11b3a721a95d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/360794
Commit-Queue: Joanna Wang <jojwang@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Joanna Wang <jojwang@google.com>
If interrupt signal is sent to repo process while sync is running, repo
prints stack trace for each concurrent job that is currently running
with no useful information.
Instead, this change captures KeyboardInterrupt in each process and
prints one line about current project that is being processed.
Change-Id: Ieca760ed862341939396b8186ae04128d769cd56
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/357135
Reviewed-by: Joanna Wang <jojwang@google.com>
Tested-by: Josip Sokcevic <sokcevic@google.com>
repo sync progress bar is misleading. Many bug reports mentioned that
repo is stuck at the repo that is currently displayed in the progress
bar. Repo sync actually shows what repository is the last processed.
This change makes that obvious.
Change-Id: I962bf0bc65af7ac0ed98db86e9144f07d9e1f96f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/357134
Reviewed-by: Joanna Wang <jojwang@google.com>
Tested-by: Josip Sokcevic <sokcevic@google.com>
This can potentially show up when sync'ing projects with submodules
that are not declared in the manifest as well as the internal
'.repo/repo' project, which is likely not desirable from a user
standpoint.
Change-Id: I93d7fcd6e3fd1818357ea4537882a864dea9942c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/355920
Reviewed-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Michael Kelly <mkelly@arista.com>
Resolves multiple TODOs. Since we are requiring Python 3,
we move to using print function with flush=True instead of
using sys.stdout.flush().
Change-Id: I54db0344ec78ac81a8d6c6c7e43ee7d301f42f02
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/354701
Tested-by: Daniel Kutik <daniel.kutik@lavawerk.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Add a per-remote option `uploadwarningthreshold` allowing the user to
override how many commits can be uploaded prior to a warning being
displayed.
Change-Id: Ia7e1b2c7de89a0bf9ca1c24cc83dc595b3667437
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/354375
Tested-by: David Greenaway <dgreenaway@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Since --jobs defaults to 0, not None, we never pull the value out
of the manifest. Treat values of 0 and None the same to fix.
Bug: http://b/239712300
Bug: http://b/260908907
Change-Id: I9b1026682072366616825fd72f90bd90c10a252f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/354254
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Josip Sokcevic <sokcevic@google.com>
Reviewed-by: Sam Saccone <samccone@google.com>
If syncing in _FetchOne fails with GitError, sync_result does not get
set. There's already a separate local variable for success; do the same
for remote_fetched instead of referring to the conditionally defined
named tuple.
This bug is originally caused by a combination of ad8aa697 "sync: only
print error.GitError, don't raise that exception." and 1eddca84 "sync:
use namedtuples for internal return values".
Change-Id: I0f9dbafb97f8268044e5a56a6f92cf29bc23ca6a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/354176
Tested-by: Karsten Tausche <karsten@fairphone.com>
Reviewed-by: LaMont Jones <lamontjones@google.com>
The wrong revision of the change was submitted as
d793553804.
Change-Id: I6f3e4993cf40c30ccf0d69020177db8fe5f76b8c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/353934
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Sam Saccone <samccone@google.com>
Do not use a progress bar when not doing GC, and restrict activity in
that case to only repairing preciousObject state.
This also includes additional cleanup based on review comments from
previous changes.
Change-Id: I48581c9d25da358bc7ae15f40e98d55bec142331
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/353514
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
This bug-cacher related code is no longer needed.
This reverts commit 891e8f72ce.
Change-Id: Ia94a2690ff149427fdcafacd39f5008cd60827d5
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/353774
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Sam Saccone <samccone@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
REPO_AUTO_GC was introduced as a way for users to restore the previous
default behavior, since the default changed at the same time as the
option was added. As such, it should be marked as deprecated, and
removed entirely in a future release.
Change-Id: Ib73d98fbea693e7057cc4587928c225a9e4beab2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/353734
Reviewed-by: Sam Saccone <samccone@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Correct usage of project.relpath for multi manifest workspaces.
Change-Id: Idc32873552fcdae6eec7b03dde2b2f31134b72fd
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/347534
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
Since the same project can be checked out in multiple paths, we need to
track the "to be uploaded" projects by path, rather than project name.
Bug: crbug.com/gerrit/16260
Test: manual
Change-Id: Ic3dc81bb8acb34886baa6299e90a49c7ba372957
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/351054
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
Add an environment variable to restore previous behavior, since the
older version of repo does not support `--auto-gc`.
Change-Id: I874dfb8fc3533a97b8adfd52125eb3d1d75e2f3c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/351194
Reviewed-by: Sam Saccone <samccone@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
Adds --auto-gc and --no-auto-gc (default) options to control sync's
behavior around calling `git gc`.
Bug: b/184882274
Change-Id: I4d6ca3b233d79566f27e876ab2d79f238ebc12a9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/344535
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
Aligns argument usage of refactored GitcManifest (8c1e9cbef
"manifest_xml: refactor manifest parsing from client management") to fix
the `repo gitc-init` error: `fatal: manifest_file must be abspath`.
Change-Id: I1728032cce3f39ed1077bbb7ef714410c2c49e1a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/350374
Tested-by: Woody Lin <woodylin@google.com>
Reviewed-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Xin Li <delphij@google.com>
If this is a project that is not using object sharing (there is only one
copy of the remote project) then clear preciousObjects.
To override this for a project, run:
git config --replace-all repo.preservePreciousObjects true
Change-Id: If3ea061c631c5ecd44ead84f68576012e2c7405c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/350235
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
People rarely care about the history of the manifest repo. Add a
parameter to specify depth for the manifest.
For now, make the default behavior the same as the current behavior. At
a future date, the default will be changed to 1. People who need the
full history should begin passing --manifest-depth=0 to preserve the
behavior when the default changes.
We can't reuse the existing --depth option because that applies to
all projects we clone, not just the manifest repo.
Bug: https://crbug.com/gerrit/16193, https://crbug.com/gerrit/16358
Change-Id: I9130fed3eaed656435c778a85cfe9d04e3a4a6a0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/349814
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Xin Li <delphij@google.com>
This reverts commit 076d54652e.
Reason for revert: crbug.com/gerrit/16358
Change-Id: I2970eb50677cca69786f71edffe4aa5271cf139f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/349834
Reviewed-by: Sam Saccone <samccone@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Xin Li <delphij@google.com>
When repo sync fails, if the workspace is a mirror, an uninitialized
variable is referenced.
Bug: crbug.com/gerrit/16356
Change-Id: I1dba9f92319b9cbfd18460327560a395c88a089f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/349654
Reviewed-by: Sam Saccone <samccone@google.com>
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
Use pre-3.9 syntax for NamedTuple, so that users do not need to have
python 3.9 or later installed.
Bug: b/255632143, crbug.com/gerrit/16355
Test: manually verified with python 3.8
Change-Id: I488d2d5267ed98d5c55c233cc789e629f1911c9d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/349395
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
Replace tuple returns with namedtuples, to simplify adding new fields.
Extend the Sync_NetworkHalf return value to:
- success: True if successful (the former return value)
- remote_fetched: True if we called `git fetch`
Change-Id: If63c24c2f849523f77fa19c05bbf23a5e9a20ba9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/344534
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
By default there are 4 categories in the diffmanifests
api puts the diffs in to - added, removed, changed and unreachable
Example of command - repo diffmanifests 1.xml 2.xml
added - list down the projects present in second manifest but not in
first
removed - list down the projects present in first but not in
second
changed - list down the changes and the differences for each project
unreachable - when it encounters revision value in a project is incorrect
But, when there are projects present in both manifests and could not
find in local workspace where we have cloned the repo(because of
different/subset manifest xml) - this will create unhandled exception
Now we have added a 5th category called 'missing' - where in such
cases it will handle the scenario and print the log for user
Example:
added projects :
project_2 at revision e6c8a59832c05dc4b6a68cee6bc0feb832181725
removed projects :
project_1 at revision e6c8a59832c05dc4b6a68cee6bc0feb832181725
changed projects :
project_3 changed from 3bb890e1286f04e84d505e5db48e0ada89892331 to e434b3736f11537c67590fefadfe4495895e9785
missing projects :
project_4
Change-Id: I244e8389bff7e95664c29d3dcb61e22308e3a573
Signed-off-by: Shashank Devaraj <shashankkarthik@gmail.com>
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/344774
Reviewed-by: Mike Frysinger <vapier@google.com>
This is ENABLED BY DEFAULT due to data corruption potential. To disable
it, set REPO_BACKUP_OBJECTS=0 in the environment.
While the workspace will grow over time, this provides a recovery path
for an issue where objects are erroneously deleted from the workspace,
resulting in lost work. Once the root cause is determined, we will be
able to stop saving backups again.
Backups are kept in .git/objects/.repo/pack.bak
Bug: https://crbug.com/gerrit/16247
Change-Id: Ib8b5c9b4bf0dfa9e29606e0f5c881d65996b2a40
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/345114
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Xin Li <delphij@google.com>
We don't want to keep showing the user config notice when reinitializing
existing checkouts, so hide it.
Change-Id: Id40610bd683396cbff7e1aefc092c8b77c397783
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/343536
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: LaMont Jones <lamontjones@google.com>
Make it clear to users when we're reinitializing an existing checkout
in case they weren't expecting it.
Bug: https://crbug.com/gerrit/12396
Change-Id: I22e89ae041a8e7b147c9d06a82f1302dd5807ae0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/343535
Reviewed-by: LaMont Jones <lamontjones@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
If stdout or stderr are empty, don't print empty lines.
Also trim any trailing lines so we don't show excess ones.
Change-Id: I65fcea191e1f725be03c064cb510578632466013
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/343516
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: LaMont Jones <lamontjones@google.com>
People rarely care about the history of the manifest repo. Change
the default to 1 to speed up initial setup. If people really want
the full history, they can pass --manifest-depth=0.
We can't reuse the existing --depth option because that applies to
all projects we clone, not just the manifest repo.
Bug: https://crbug.com/gerrit/16193
Change-Id: Ideab1712e9ffc743b9bae97903e074d7d429b134
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/343435
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: LaMont Jones <lamontjones@google.com>
We almost always use self.remote.name when calling self.GetRemote,
so make that the default to simplify the code a bit.
Change-Id: Ifdf6e1370d6b8963b44e6d384b0fac8fa5c4f2ba
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/343184
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: LaMont Jones <lamontjones@google.com>
The `--wip` allow to bulk push changed as work-in-progress. This CL
intend to allow the opposite opperation by removing the wip mark on the
CL and set it to be ready to review
Change-Id: If0743c5b14829f77be2def5a8547060d06a5648c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/342214
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: William Escande <wescande@google.com>
If the server responds with an HTML page, we should show that to the
user instead of crashing with XML errors.
Bug: https://crbug.com/gerrit/15936
Change-Id: I52e6b781c3bb6a6c9f6ecbe2e0907044876cdc8d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/337519
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
For projects that no longer share their per-project objects directly, we
no longer have to disable the git settings that disable pruning. See
commit "project: stop directly sharing objects/ between shared projects"
for more details.
Bug: https://crbug.com/gerrit/15553
Change-Id: Ica0e83c3002716424c2bc9111b3b3d3a76c30973
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/337535
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
For --jobs-network, the logic is now:
* If the user specifies --jobs-network, use that.
* Else, if the user specifies --jobs, use that.
* Else, if the manifest specifies sync-j, use that.
* Else, default to 1.
Then we limit the jobs count based on the softlimit RLIMIT_NOFILE.
For --jobs-checkout, the logic is now:
* If the user specifies --jobs-checkout, use that.
* Else, if the user specifies --jobs, use that.
* Else, if the manifest specifies sync-j, use that.
* Else, default to DEFAULT_LOCAL_JOBS which is based on user's ncpus.
Then we limit the jobs count based on the softlimit RLIMIT_NOFILE.
For garbage collecting, the logic is now:
* If the user specifies --jobs, use that.
* Else, if the manifest specifies sync-j, use that.
* Else, default to the user's ncpus.
Then we limit the jobs count based on the softlimit RLIMIT_NOFILE.
Having to factor in the manifest settings makes this more complicated
which is why we delay processing of defaults until after we've synced
the manifest projects.
Bug: http://b/239712300
Change-Id: Id27cda63c76c156f1d63f6a20cb2c4ceeb3d547c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/341394
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: LaMont Jones <lamontjones@google.com>
Apparently, manifest.topdir already contains a trailing slash in some
cases, so a simple string concatenation may or not lead to double
slashes. It is safer to use os.path.join. See
https://screenshot.googleplex.com/6pSY3QewAeCdAqk
Change-Id: I2411452296b7e78fc975787b675273a48d6b3d85
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/341574
Reviewed-by: LaMont Jones <lamontjones@google.com>
Tested-by: Mateus Azis <azis@google.com>
Display the project path relative to the outermost manifest by default,
and relative to the sub manifest only when --this-manifest-only is
specified.
For project-related diagnostic messages, use the outermost manifest for
messages.
Change-Id: I4537d7dd412a2c182e77d6720e95c1b0ef70eb0e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/340754
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
This option will suppress the
Uncommitted changes in ... (did you forget to amend?)
prompt when there are untracked (unknown) files in the working copy.
The prompt is still shown if tracked files are modified.
Change-Id: Ia3fcc82989b7fad09b69214eda31e2d0dfc14600
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/340456
Tested-by: Martin Geisler <mgeisler@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
If the user says `--no-use-superproject`, then do not bother syncing the
superproject.
Also add/update docstrings and comments throughout.
Change-Id: I9cdad706130501bab9a22d3099a1dae605e9c194
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/338975
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
With this change, partial syncs (sync with a project list) are again
supported.
If the updated manifest includes new sub manifests, download them
inheriting options from the parent manifestProject.
Change-Id: Id952f85df2e26d34e38b251973be26434443ff56
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334819
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
This way we know we don't need to encode the labels.
Change-Id: Ib83ed8f4ed05f00b9d2d06a9dd3f304e4443430e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/337518
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: LaMont Jones <lamontjones@google.com>
When the user does not specify any manifest groups, this allows the
parent manifest to indicate which manifest groups should be used for
syncing the submanifest.
Change-Id: I88806ed35013d13dd2ab3cd245fcd4f9061112c4
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/335474
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
We need to iterate over multiple manifests, and generally use the
outer_client.manifest for multi-manifest support. This refactors the
use of self.manifest into a chosen manifest.
Change-Id: I992f21d610c929675e99555ece9c38df4b635839
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334699
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Make git_superproject independent of the command line by passing
the specific value instead of requiring the caller to have an
optparse.Values object to pass in.
Flag --use-superproject and --archive as incompatible in subcmds/init.py
Change-Id: Ied7c874b312e151038df903c8af4328f070f387c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/335135
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
- REPO_PATH is relative to the root of the client. REPO_OUTERPATH is not
needed.
- REPO_INNERPATH is relative to the sub manifest root.
- REPO_OUTERPATH is the path for the sub manifest root relative to the
root of the client.
Change-Id: I031692891cfef2634d1358584d27a6a4df735c20
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334899
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
Always create Superproject when there is a <superproject> tag, and have
it hold the XML content, similar to how other manifest elements are
handled.
This also adds SetQuiet and SetPrintMessages to Superproject
consistent with manifest.SetUseLocalManifests.
Change-Id: I522bf3da542006575799f0640c67f7052704f266
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334641
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
The documentation states that a `sync-c` attribute in the manifest file
can set a default for whether only the current branch should be fetched
or all branches. This seems to have been broken for some time.
Commit 7356114 introduced the `--no-current-branch` CLI option and
relied on getting `None` via `optparse` if neither `--current-branch`
nor `--no-current-branch` was set to distinguish it from a boolean
value. If `None` was received, it would read the value from the manifest
option `sync-c`. The parsing went through the utility function
`_GetCurrentBranchOnly` which returned `True` if `--current-branch` had
been given on the command-line, or fell back on the "superproject"
setting, which would either return `True` or `None`. This would
incorrectly make `repo` fall back to the manifest setting even if the
user had given `--no-current-branch` if no superproject was requested --
the manifest became "too powerful":
Command-line Using superproject → `current_branch_only`
------------ ------------------ -----------------------
No From manifest
Yes True
--current-branch No True
--current-branch Yes True
--no-current-branch No From manifest ← wrong
--no-current-branch Yes True
In commit 0cb6e92 the superproject configuration value reading changed
from something that could return `None` to something that always
returned a boolean. If it returned `False`, this would then incorrectly
make `repo` ignore the manifest option even if neither
`--current-branch` nor `--no-current-branch` had been given. The
manifest default became useless:
Command-line Using superproject → `current_branch_only`
------------ ------------------ -----------------------
No False ← wrong
Yes True
--current-branch No True
--current-branch Yes True
--no-current-branch No False
--no-current-branch Yes True
By swapping the order in which the command-line option target and the
superproject setting is evaluated, things should work as documented:
Command-line Using superproject → `current_branch_only`
------------ ------------------ -----------------------
No From manifest
Yes True
--current-branch No True
--current-branch Yes True
--no-current-branch No False
--no-current-branch Yes True
Change-Id: I933c232d2fbecc6b9bdc364ebac181798bce9175
Tested-by: Daniel Andersson <daniel.r.andersson@volvocars.com>
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334270
Reviewed-by: Mike Frysinger <vapier@google.com>
- do not call the internal method from subcmds/sync.py.
- use the correct default groups for submanifests.
- only sync the superproject when we are told to.
Change-Id: I81e4025058f1ee564732b9e17aecc522f6b5f626
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334639
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
Also fixes some typos
Change-Id: Id2ba5834ba3a74ed3f29c36d2c0030737dc63e35
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334579
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
This moves more of the manifest project handling into ManifestProject.
Change-Id: Iecdafbec18cccdfd8e625753c3bd1bcddf2b227f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334520
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Use ManifestProject properties for config values.
Change-Id: Ib4ad90b0d9a089916e35615b8058942e6d01dc04
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334519
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Move the logic to sync a ManifestProject out of subcmds/init.py
Change-Id: Ia9d00f3da1dc3c5dada84c4d19cf9802c2346cb0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334140
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
To be addressed in another change:
- a partial `repo sync` (with a list of projects/paths to sync)
requires `--this-tree-only`.
Change-Id: I6c7400bf001540e9d7694fa70934f8f204cb5f57
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/322657
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
It was reported that git-lfs did not work with git-repo. Specifically,
`git read-tree -u` run by `repo sync` would fail git-lfs's smudge
filter. See https://github.com/github/git-lfs/issues/1422.
In fact, by the time `git read-tree -u` is run, the repository is not
bare. It is just that, the working directory is not the same as the
.git directory. git-lfs's filter should work. No one seems to have
delved into that issue.
Today, with newer versions of git-repo and git-lfs, that issue will
not reproduce. Tested with
- git 2.33, git-lfs 2.13 on macOS
- git 2.17, git-lfs 2.3 on ubuntu
So, it seems fine to add an option --enable-git-lfs-filter, default to
false, and stat that it may not work with older versions of git and
git-lfs in the help doc.
Bug: https://crbug.com/gerrit/14516
Change-Id: I8d21854eeeea541e072f63d6b10ad1253b1a9826
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/328359
Tested-by: XD Trol <milestonejxd@gmail.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
If the user passes a bad --repo-rev setting in a new checkout, add a
tip to the error message that their option is probably bad instead of
just saying "unable to resolve".
If the user has already initialized a checkout, we'd display a raw
traceback which would confuse them. Swallow that and also include
the --repo-rev tip.
Bug: https://crbug.com/gerrit/15610
Change-Id: I5d72513c7b37bf9bb5d19862fcdfaf0d1f44e886
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/328820
Reviewed-by: Jack Neus <jackneus@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
If the branch is current, or present in less than half of the projects,
list which projects it is *in*.
Otherwise, correctly detect which projects (by relpath) it is not in.
Previously, the "not in" path would incorrectly list all projects.
Change-Id: Ia153856f577035a51f538b7bf5d3135b70c69d52
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/328199
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Xin Li <delphij@google.com>
+ Display 'Defaulting to no-use-superproject because there is no working tree.'
message if --use-superproject option is used and we are not using
superproject because manifest is either a mirror or is an archive.
Tested the code with the following commands.
$ ./run_tests -v
Tested the sync code by using repo_dev alias and pointing to this CL.
$ repo init -u https://android.googlesource.com/mirror/manifest --mirror
$ repo_dev sync
Receiving objects: 100% (3/3), done.eiving objects: 33% (1/3)
$ repo_dev sync --use-superproject
Defaulting to no-use-superproject because there is no working tree.
Fetching: 0% (0/2158) warming up
Bug: https://crbug.com/gerrit/15368
Change-Id: I16b87ee9623315dbc3100b612b1decdaab7ac1dc
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/325797
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
init.py
+ Similar to opt.archive, gave an error if --mirror option is
used with --use-superproject.
sync.py
+ Defaulted to --no-use-superproject if manifest is a mirror or
archive (similar to error at line# 1067).
Tested:
+ run_tests
+ flake8 (will fix known errors in another CL).
$ repo_dev init -u sso://googleplex-android.git.corp.google.com/platform/manifest --use-superproject --mirror
Usage: repo init [options] [manifest url]
main.py: error: --mirror and --use-superproject cannot be used together.
+ repo init and repo sync with --mirror and without --mirror
options.
$ repo_dev init -u https://android.googlesource.com/platform/manifest
$ repo_dev sync
...superproject.git: Initial setup for superproject completed.
+ With --mirror option, verfied there are no exceptions in git_superproject.py
Bug: [google internal] b/206537893
Change-Id: I059f20e76f0ab36f0587f29779bb53ede4663bd4
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/323955
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
This should make it easy to discover for people poking around .repo/.
Change-Id: Ie5051551f25127c0592df5e36efba7bb2263e5d4
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/323701
Reviewed-by: Jack Neus <jackneus@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
If a remote deletes a ref, and it points to an object that doesn't
exist locally, we can get into a bad state, and the only way for the
user to recover is to run `repo sync --prune` (and to know that is
the option they need). The error message is not helpful:
fatal: bad object refs/remotes/cros/firmware-zork-13421.B-master
error: https://chromium.googlesource.com/chromiumos/platform/ec did not send all necessary objects
This situation can also come up when the remote renames refs in a
UNIX FS incompatible way. For example, replacing refs/heads/foo
with refs/heads/foo/bar.
Also add a --no-prune option for users to disable the behavior.
Bug: https://issuetracker.google.com/203366450
Change-Id: Icf45d838a10938feb091d29800f7e49240830ec3
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/322956
Reviewed-by: Andrew Lamb <andrewlamb@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
This has been broken since it was added where --tags was actually
the same as --no-tags. Oddly, it was copied from init where the
logic is correct.
Bug: https://crbug.com/gerrit/12401
Change-Id: I15b89da1a655176a11bebc22573b25c728055328
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/322955
Reviewed-by: Andrew Lamb <andrewlamb@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Previously gsutil stderr was getting piped into stdout, which
yields bad results if there are non-fatal warnings in stderr.
Additionally, we should fail outright if gsutil fails (by adding
`check = True`) rather than fail later on when we try to sync to
a manifest that is in fact just a stderr dump.
BUG=none
TEST=manual runs with bad gs urls
Change-Id: Id71791d0c3f180bd0601ef2c783a8e8e4afa8f59
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/321935
Tested-by: Jack Neus <jackneus@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
sync should not attempt to sync the manifest project if it was
created from a standalone manifest. The current work around is to
run sync with --nmu.
BUG=none
TEST=manual runs
Change-Id: I2e121af0badf9642143e77c7af89d1c2d993b0f3
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/321195
Tested-by: Jack Neus <jackneus@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Previously `git gc` was being run on every gitdir even when they shared
the same objects. Instead only call it once and use pack-refs for the
gitdirs that were not gc'ed.
Bug: https://crbug.com/gerrit/15113
Test: repo sync -j # and check that git pack-refs is called
Change-Id: Icff37ab3ec78cfb44391d8cc7f2d875991532320
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/320275
Tested-by: Allen Webb <allenwebb@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
`repo init` doesn't do anything on re-init when the checkout has
been initialized using --standalone manifest. Rather than let the
tool run through its existing flows (which happen to noop), check
the args and explicitly quit if a bare `repo init` is run on a
standalone checkout.
BUG=none
TEST=manual tests
Change-Id: Ie4346ef6df1282ec3e3f8045a08138c93653fece
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/320735
Tested-by: Jack Neus <jackneus@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
We were accidentally always setting manifest.standlone in config,
which was messing up behavior for standard use cases.
BUG=gerrit:15160
TEST=manual runs
Change-Id: Ic80f084ae97de5721aced3bb52d3ea9115f8d833
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/320715
Tested-by: Jack Neus <jackneus@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
gc.autoDetach is enabled by default which makes 'git gc --auto' return
immediately and run in background. This can lead to a pile up of
operations all using large amounts of memory at the same time. To avoid
this set gc.autoDetach to false so that the garbage collect task waits
for instances to finish before spawning more.
Bug: https://crbug.com/gerrit/15113
Test: repo sync -j # and check the number of 'git gc' processes
Change-Id: Ic0815156ba3db03972968f33f6f9f51e4928f23b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/319835
Tested-by: Allen Webb <allenwebb@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Some of the file removal calls are subject to race conditions (if
something else deletes the file), so extend our remove API to have
an option to ignore ENOENT errors. Then update a bunch of random
call sites to use this new functionality.
Change-Id: I31a9090e135452033135337a202a4fc2dbf8b63c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/319195
Reviewed-by: Sean McAllister <smcallis@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Added --standalone_manifest to repo tool. If set, the
manifest is downloaded directly from the appropriate source
(currently, we only support GS) and used instead of creating
a manifest git checkout. The manifests.git repo is still created to
keep track of various config but is marked as being for a standalone
manifest so that the repo tool doesn't try to run networked git
commands in it.
BUG=b:192664812
TEST=existing tests (no coverage), manual runs
Change-Id: I84378cbc7f8e515eabeccdde9665efc8cd2a9d21
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/312942
Tested-by: Jack Neus <jackneus@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
git_trace2_event_log.py:
+ Added LogDataConfigEvents method to log 'data' events.
Sync's current_sync_state and previous_sync_state are logged
as 'data' events in the current log.
It logs are key/value in the |config| argument. Each key is
prefixed with |prefix| argument.
The following are sample events that are logged during repo sync.
{"event":"data",
"sid":"repo-20210914T181545Z-P000330c0/repo-20210914T181545Z-P000330c0",
"thread":"MainThread",
"time":"2021-09-14T18:16:19.935846Z",
"key":"previous_sync_state/repo.syncstate.main.synctime",
"value":"2021-09-14T17:27:11.573717Z"}
{"event":"data",
"sid":"repo-20210914T181545Z-P000330c0/repo-20210914T181545Z-P000330c0",
"thread":"MainThread",
"time":"2021-09-14T18:16:19.955546Z",
"key":"current_sync_state/repo.syncstate.main.synctime",
"value":"2021-09-14T18:16:19.935979Z"}
tests/test_git_trace2_event_log.py:
+ Added unit tests
sync.py:
+ Changed logging calls to LogDataConfigEvents.
Tested:
$ ./run_tests
Tested it by running the following command multiple times.
$ repo_dev sync -j 20
repo sync has finished successfully
Verified config data is looged in trace2 event logs.
Bug: [google internal] b/199758376
Change-Id: I75fd830e90c1811ec28510538c99a2632b104e85
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/317823
Reviewed-by: Josh Steadmon <steadmon@google.com>
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
1) If the manifest has superproject tag (git_master, etc), then
display error/warning messages (as it is doing today)
2) If the manifest doesn't have superproject tag (nest, chromeos
manifests), then don't display any error/warning messages about
superrproject (behave as though user has specified
--no-use-superproject).
3) Print error/warning messages if --use-superproject passed as
argument to repo sync.
4) No change in behavior for the repo init command.
git_superproject.py:
+ Fixed typo in _WriteManifestFile method name
+ Superproject accepts print_message as an argument and it defaults
to True. All messages that are printed to stderr are controlled by
this flag. If it is True, then messages get printed.
+ Added PrintMessages function which return true if either
--use-superproject is specified on the command line or if the
manifest has a superproject tag.
sync.py:
+ Displays the warning message if PrintMessgages are enabled and
passes that as argument to superproject object.
+ Added 'hassuperprojecttag' trace2 log entry for analysis. We can
find users/branches that are using superproject, but the manifest is
missing the superproject tag.
Tested:
$ ./run_tests
+ Verified printing of messages with and without superproject tag, with
with --use-superproject option.
+ aosp-master
$ repo_dev init --use-superproject -u https://android.googlesource.com/platform/manifest
$ repo_dev sync
+ A manifest without superproject tag.
$ repo_dev init -m $(pwd)/manifest_7482982.xml
$ repo_dev sync -n -c -j32 -m $(pwd)/manifest_7482982.xml
Bug: [google internal] b/196411099
Change-Id: I92166dcad15a4129fab82edcf869e7c8db3efd4b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/314982
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
git_config.py:
+ Added SyncAnalysisState class, which saves the following data
into the config object.
++ sys.argv, options, superproject's logging data.
++ repo.*, branch.* and remote.* parameters from config object.
++ current time as synctime.
++ Version number of the object.
+ All the keys for the above data are prepended with 'repo.syncstate.'
+ Added GetSyncAnalysisStateData and UpdateSyncAnalysisState methods
to GitConfig object to save/get the above data.
git_trace2_event_log.py:
+ Added LogConfigEvents method with code from DefParamRepoEvents
to log events.
sync.py:
+ superproject_logging_data is a dictionary that collects all the
superproject data that is to be logged as trace2 event.
+ Sync at the end logs the previously saved syncstate.* parameters
as previous_sync_state. Then it calls config's UpdateSyncAnalysisState
to save and log all the current options, superproject logged data.
docs/internal-fs-layout.md:
+ Added doc string explaining [repo.syncstate ...] sections of
.repo/manifests.git/config file.
test_git_config.py:
+ Added unit test for the new methods of GitConfig object.
Tested:
$ ./run_tests
$ repo_dev init --use-superproject -u https://android.googlesource.com/platform/manifest
Tested it by running the following command multiple times.
$ repo_dev sync -j 20
repo sync has finished successfully
Verified config file has [syncstate ...] data saved.
Bug: [google internal] b/188573450
Change-Id: I1f914ce50f3382111b72940ca56de7c41b53d460
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/313123
Tested-by: Raman Tenneti <rtenneti@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Xin Li <delphij@google.com>
Skip updating the superproject when -l is present and use the existing
superproject, if available (this would make sync -l work as it's
intended to do), and fall back to sync without superproject when not
(this would catch the case when superproject is enabled by automatic
rollout).
Tested:
$ repo sync -j 20 -n
NOTICE: --use-superproject is in beta; report any issues to the address described in `repo version`
/usr/local/google/home/rtenneti/work/android/src/aosp/.repo/exp-superproject/925043f706ba64db713e9bf3b55987e2-superproject.git: Initial setup for superproject completed.
Fetching: 100% (1032/1032), done in 41.184s
...
$ repo_dev sync -j 20 -l
prebuilts/asuite/: discarding 1 commits
prebuilts/runtime/: discarding 1 commits
...
repo sync has finished successfully.
+ With superproject-override.xml and test it.
$ ls -l .repo/exp-superproject/
total 176
drwxr-xr-x 7 rtenneti primarygroup 4096 Jul 27 14:10 925043f706ba64db713e9bf3b55987e2-superproject.git
-rw-r--r-- 1 rtenneti primarygroup 172742 Jul 27 14:10 superproject_override.xml
rtenneti@rtenneti:~/work/android/src/aosp$ repo_dev sync -j 20 -l
...
repo sync has finished successfully.
+ Rename the file superproject-override.xml and test it.
$ ls -l .repo/exp-superproject/
total 176
drwxr-xr-x 7 rtenneti primarygroup 4096 Jul 27 14:10 925043f706ba64db713e9bf3b55987e2-superproject.git
-rw-r--r-- 1 rtenneti primarygroup 172742 Jul 27 14:10 temp.xml
$ repo_dev sync -j 20 -l
Checking out: 1% (12/1031) platform/external/rust/crates/fallible-streaming-iteexternal/linux-kselftest/: discarding 1 commits
prebuilts/remoteexecution-client/: discarding 1 commits
Checking out: 51% (536/1031) platform/prebuilts/gcc/darwin-x86/aarch64/....
....
Checking out: 100% (1031/1031), done in 5.478s
repo sync has finished successfully.
Bug: [google internal] b/184368268
Change-Id: I3aba5872e4f7c299977b92c2a39847ef28698c5a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/312962
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
Currently we have the behavior:
* `repo`: Equivalent to `repo help` -- only shows common subcommands
(with short description), and then exits 0.
* `repo --help`: Shows repo's core options, lists all commands (no
specific info), and then exits 0.
The first case is not behaving well:
* If you run `repo` without a specific subcommand, that's an error,
so we should be exiting 1 instead.
* Showing only subcommands and no actual option summary makes it seem
like repo itself doesn't take any options. This confuses users.
Let's rework things a bit. Now we have the behavior:
* `repo`: Shows repo's core options, lists all commands (no specific
info), and then exits 1.
* `repo --help`: Shows repo's core options, shows common subcommands
(with short description), and then exits 0.
* `repo --help-all`: Shows repo's core options, shows all subcommands
(with short description), and then exits 0.
Basically we swap the behavior of `repo` and `repo --help`, and fix
the exit status when the subcommand is missing.
The addition of --help-all is mostly for the man pages. We were
relying on `repo help --all` to generate the repo(1) man page, but
that too omitted the core repo options. Now the man page includes
all the core repo options and provides a summary of all commands.
Change-Id: I1f99b99d5b8af2591f96a078d0647a3d76d6b0fc
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/312908
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
