When the alias attribute is set for a remote, the RemoteSpec attached to
a Project only contains the alias name used by git, not the original
name used in the manifest. But that's not enough information to
reconstruct the manifest, so save off the original manifest name as
another RemoteSpec parameter, only used to write the manifest out.
Bug: Issue 181
Bug: Issue 219
Change-Id: Id7417dfd6ce5572e4e5fe14f22924fdf088ca4f3
This way any changes made to the main manifest are reflected in the gitc
manifest. It's also necessary to use both manifests to sync since the
information required to update the gitc manifest is actually in the repo
manifest.
This also fixes a few issues that came up when testing. notdefault
groups weren't being saved to the gitc manifest in a method that matched
'sync'. The merge branch wasn't always being set to the correct value
either.
Change-Id: I435235cb5622a048ffad0059affd32ecf71f1f5b
This way any changes made to the main manifest are reflected in the gitc
manifest. It's also necessary to use both manifests to sync since the
information required to update the gitc manifest is actually in the repo
manifest.
This also fixes a few issues that came up when testing. notdefault
groups weren't being saved to the gitc manifest in a method that matched
'sync'. The merge branch wasn't always being set to the correct value
either.
Change-Id: I5dbc850dd73a9fbd10ab2470ae4c40e46ff894de
Updates the repo launcher and gitc_utils to pull the manifest
directory location out of the gitc config file.
Change-Id: Id08381b8a7d61962093d5cddcb3ff6afbb13004b
Add repo start support for GITC checkouts. If the user is in
the GITC FS view, they can now run repo start to check out
the sources and create a new working branch.
When "repo start" is called on a GITC project, the revision
tag is set to an empty string and saved in a new tag:
old-revision. This tells the GITC filesystem to display the
local copy of the sources when being viewed. The local copy
is created by pulling the project sources and the new branch
is created based off the original project revision.
Updated main.py to setup each command's gitc_manifest when
appropriate.
Updated repo sync's logic to sync opened projects and
updating the GITC manifest file for the rest.
Change-Id: I7e4809d1c4fc43c69b26f2f1bebe45aab0cae628
This argument wasn't being copied, which caused syncs from generated
manifests to pull down too much of the git history.
Change-Id: I269bab788d4557267c081628b3f8c6aec7744e81
Previously, in running the `manifest` command, we wouldn't output the
upstream if the default upstream would include the pinned sha1.
However, now that fetching refs/heads/* doesn't guarantee that we will
have the sha1, we need to always output the specified upstream branch.
Change-Id: Ib8b409a8ecd439397b38ee9649c530407797f841
Previously, we used a regex that would only remove a phony string from
a url if it existed, but we recently replaced that with a slice. This
change goes back to the previous behavior.
Change-Id: I8baf527be01c4b49d45b903b31a1cd6315563d5b
Instead of using regex, append the netloc and relative
scheme lists with the custom scheme.
The schemes will only be appended when needed, instead
of passing X amount of regex replaces.
see http://bugs.python.org/issue18828 for more details.
Change-Id: I10d26d5ddc32e7ed04c5a412bdd6e13ec59eb70f
This reverts commit 38e4387f8e.
A "repo init" followed by "repo sync" is meant to be as safe as
"git clone". In particular it should not run arbitrary code provided
by the manifest owner.
It would still be nice to have support for manifest-defined git hooks
--- they'd just need a prompt like the upload RepoHook has. Hopefully
a later change can bring them back.
Change-Id: I5ecd90fb5c2ed64f103d856d1ffcba38a47b062d
Signed-off-by: Jonathan Nieder <jrn@google.com>
When working within a team or corporation it is often
useful/required to use predefined git templates. This
change teaches repo to use a per-remote git hook template
structure.
The implementation is done as a continuation of the
existing projecthook functionality. The terminology is
therefore defined as projecthooks.
The downloaded projecthooks are stored in the .repo
directory as a metaproject separating them from the users
project forest.
The projecthooks are downloaded and set up when doing a
repo init and updated for each new repo init.
When downloading a mirror the projecthooks gits are
not added to the bare forest since the intention is to
ensure that the latest are used (allows for company policy
enforcement).
The projecthooks are defined in the manifest file in the
remote element as a subnode, the name refers to the
project name on the server referred to in the remote.
<remote name="myremote ..>
<projecthook name="myprojecthookgit" revision="myrevision"/>
</remote>
The hooks found in the projecthook revision supersede
the stock hooks found in repo. This removes the need for
updating the projecthook gits for repo stock hook changes.
Change-Id: I6796b7b0342c1f83c35f4b3e46782581b069a561
Signed-off-by: Patrik Ryd <patrik.ryd@stericsson.com>
Signed-off-by: Ian Kumlien <ian.kumlien@gmail.com>
'upstream' attribute is now transferred to the new manifest xml
that is created when using command 'repo manifest -o -'.
Manifest help is updated for the attributes 'sync-c','sync-s' and
'sync-j'.
Bug: Issue 164
Change-Id: If63f781e91d25c5b5b5ea0696b0c04337b0a686a
Currently, if a local manifest wants to add groups to an existing
project, it must use remove-project and then re-add the project with
the new groups. This makes the local manifest more fragile, requiring
updates to the local manifest if the original manifest changes.
Add a new extend-project tag, which supports adding groups to an
existing project.
Change-Id: Ib4d1352efd722a65dd263d02644b9ea5ab6ed400
Some projects use multiple remotes.
In some cases these remotes have different naming conventions.
Add an option to define a revision in the remote configuration.
The `project` revision takes precedence over `remote` and `default`.
The `remote` revision takes precedence over `default`.
The `default` revision acts as a fall back as it originally did.
Change-Id: I2b376160d45d48b0bab840c02a3eef1a1e32cf6d
dict.keys() produces a dict_keys object in Python 3, which does
not support .sort(). Use sorted() which will give the same outcome.
Change-Id: If6b33db07a31995b4e44959209d08d8fb74ae339
dict.values() produce dict_values objects rather than list objects.
Convert this to a list to maintain functionality with certain functions.
Change-Id: Ie76269e19f8d68479a1d7ae03aa965252d759a9e
It's just like copyfile and runs at the same time as copyfile but
instead of copying it creates a symlink instead. This is needed
because copyfile copies the target of the link as opposed to the
symlink itself.
Change-Id: I7bff2aa23f0d80d9d51061045bd9c86a9b741ac5
Commit 8d201 "repo: Support multiple branches for the same project."
(Change id is I5e2f4e1a7abb56f9d3f310fa6fd0c17019330ecd) caused missing
mirroring manifest repository when 'repo sync' after 'repo init --mirror'.
When the function _AddMetaProjectMirror() is called to add two of
meta projects - git-repo itself and manifest repository to mirror,
it didn't add them into self._paths which has list of projects to be
sync'ed by 'repo sync'.
In addition, because member var of Project 'relpath' is used as a key
of self._paths, it should be set with proper value other than None.
Since this is only for meta projects which are not described in manifest
xml, 'relpath' is name of the projects.
Change-Id: Icc3b9e6739a78114ec70bf54fe645f79df972686
Signed-off-by: Kwanhong Lee <kwanhong.lee@windriver.com>
This command allows a deeper diff between two manifest projects.
In addition to changed projects, it displays the logs of the
commits between both revisions for each project.
Change-Id: I86d30602cfbc654f8c84db2be5d8a30cb90f1398
Signed-off-by: Julien Campergue <julien.campergue@parrot.com>
Previously, we would remove 'persistent-' then tack it on at the end
if it had been previously found. However, this would ignore urljoin's
decision on whether or not the second path was relative. Instead, we
were always assuming it was relative and that we didn't want to use
a different absolute url with a different protocol.
This change handles persistent-https:// in the same way we handled the
absense of an explicit protocol. The only difference is that this time
instead of temporarily replacing it with 'gopher://', we use 'wais://'.
Change-Id: I6e8ad1eb4b911931a991481717f1ade01315db2a
In CL:50715, I updated repo to handle multiple projects, but the
remove-projects code path was not updated accordingly. Update it.
Change-Id: Icd681d45ce857467b584bca0d2fdcbf24ec6e8db
This significantly reduces sync time and used brandwidth as only
a tar of each project's revision is checked out, but git is not
accessible from projects anymore.
This is relevant when git is not needed in projects but sync
speed/brandwidth may be important like on CI servers when building
several versions from scratch regularly for example.
Archive is not supported over http/https.
Change-Id: I48c3c7de2cd5a1faec33e295fcdafbc7807d0e4d
Signed-off-by: Julien Campergue <julien.campergue@parrot.com>
git-repo uses 2 space indentation. A couple of recent changes
introduced 4 space indentation in some modules.
Change-Id: Ia4250157c1824c1b5e7d555068c4608f995be9da
It is often useful to be able to include the same project more than
once, but with different branches and placed in different paths in the
workspace. Add this feature.
This CL adds the concept of an object directory. The object directory
stores objects that can be shared amongst several working trees. For
newly synced repositories, we set up the git repo now to share its
objects with an object repo.
Each worktree for a given repo shares objects, but has an independent
set of references and branches. This ensures that repo only has to
update the objects once; however the references for each worktree are
updated separately. Storing the references separately is needed to
ensure that commits to a branch on one worktree will not change the
HEAD commits of the others.
One nice side effect of sharing objects between different worktrees is
that you can easily cherry-pick changes between the two worktrees
without needing to fetch them.
Bug: Issue 141
Change-Id: I5e2f4e1a7abb56f9d3f310fa6fd0c17019330ecd
Currently, an error is raised if more than one default is defined.
When including another manifest, it is likely that a default has
been defined in both manifests.
Don't raise an error if all the defaults defined have the same
attributes.
Change-Id: I2603020687e2ba04c2c62c3268ee375279b34a08
Signed-off-by: Julien Campergue <julien.campergue@parrot.com>
Previously, change I7150e449341ed8655d398956a095261978d95870
had broken alias support in order to fix the manifest command to keep
it from spitting projects that point to an alias that wasn't recorded.
This commit reverts that commit and instead solves the issue more
correctly, outputting the alias in the remote node of the manifest and
respecting that alias when outputting the list of projects.
Change-Id: I941fc4adb7121d2e61cedc5838e80d3918c977c3
This is to avoid the following AttributeError:
line 681, in _ParseProject
AttributeError: '_Default' object has no attribute 'destBranchExpr'
Change-Id: Ia9f7e2cce1409d22d71bc8a74b33edf2b27702ca
Revert "Fix "'module' object is not callable" error", and fix it properly.
* The urlparse module is renamed to urllib.parse in Python 3.
* This commit fixes the code to use "urllib.parse.urlparse"
instead of creating a new module urlib and setting
urlib.parse to urlparse.urlparse.
* Fixes an AttributeError:
'function' object has no attribute 'uses_relative'
This reverts commit cd51f17c64.
Change-Id: I48490b20ecd19cf5a6edd835506ea5a467d556ac
In a couple of files the urlparse method was not being set up
correctly for python < 3 and this resulted in an error being
thrown when trying to call it.
Change-Id: I4d2040ac77101e4e228ee225862f365ae3d96cec
This adds the ability to have reviews pushed to a different branch
from the one on which changes are based. This is useful for "gateway"
systems without smartsync.
Change-Id: I3a8a0fabcaf6055e62d3fb55f89c944e2f81569f
Add a new module with methods for checking the Python version.
Instead of handling Python3 imports with try...except blocks, first
check the python version and then import the relevant modules. This
makes the code a bit cleaner and will result in less diff when/if we
remove support for Python < 3 later.
Use the same mechanism to handle `input` vs. `raw_input` and add
suppression of pylint warnings caused by redefinition of the built-in
method `input`.
Change-Id: Ia403e525b88d77640a741ac50382146e7d635924
Also-by: Chirayu Desai <cdesai@cyanogenmod.org>
Signed-off-by: Chirayu Desai <cdesai@cyanogenmod.org>
* Fix imports.
* Use python3 syntax.
* Wrap map() calls with list().
* Use list() only wherever needed.
(Thanks Conley!)
* Fix dictionary iteration methods
(s/iteritems/items/).
* Make use of sorted() in appropriate places
* Use iterators directly in the loop.
* Don't use .keys() wherever it isn't needed.
* Use sys.maxsize instead of sys.maxint
TODO:
* Make repo work fully with python3. :)
Some of this was done by the '2to3' tool [1], by
applying the needed fixes in a way that doesn't
break compatibility with python2.
Links:
[1]: http://docs.python.org/2/library/2to3.html
Change-Id: Ibdf3bf9a530d716db905733cb9bfef83a48820f7
Signed-off-by: Chirayu Desai <cdesai@cyanogenmod.org>
In some cases, especially when local manifest files exist, users may want
to force the mirrored repositories to be created in folders according to
their 'path' attribute in the manifest, rather than according to the name
of the repositories.
To enable this functionality for specified mirror, add a new attribute
'force-path' for that project in the manifest, set its value to 'true'.
Change-Id: I61df8c987a23d84309b113e7d886ec90c838a6cc
Signed-off-by: Scott Fan <fancp2007@gmail.com>
If the clone-depth attribute is set on a project, its value will
be used to set the depth when fetching the git. The value, if
given, must be a positive integer.
The value in the clone-depth attribute overrides any value given to
repo init via the --depth command line option.
Change-Id: I273015b3724213600b63e40cca4cafaa9f782ddf
Long story short, w/out this modification the manifest dump points
at the alias, rather than the actual remote for the project. This
breaks sync'ing for scenarios where the alias doesn't have the same
repos available as the remote, plus just plain is wrong.
Change-Id: I7150e449341ed8655d398956a095261978d95870
When running repo sync, the local_manifest.xml deprecation warning
is shown twice.
Add a flag to ensure that it is only displayed once.
Change-Id: Icfa2b0b6249c037c29771f9860252e6eda3ae651
If the .repo/local_manifests folder includes a local manifest file
that cannot be parsed, the current behaviour is to catch the parse
exception, print a warning, and continue to process remaining files.
This can cause any errors to go unnoticed.
Remove the exception handling, so that the exception is instead
caught in main._Main, and repo exits with a fatal error.
Change-Id: I75a70b7b850d2eb3e4ac99d435a4568ff598b7f4
When a local_manifest.xml file is present, a deprecation warning
is printed telling the user to put local manifest files in the
`local_manifests` directory.
Include the full path to the `local_manifests` directory in the
warning, to reduce confusion about where the directory should be
located. Also enclose the directory name in backticks.
Change-Id: I85710cfbd6e77fb2fa6b7b0ce66d77693ccd649f
