+ In XmlManifest._Unload set 'bugurl' to Wrapper().BUG_URL.
+ contactinfo returns a namedtuple.
+ bug_url can be accessed as self._manifest.contactinfo.bugurl.
Tested the code with the following commands.
$ ./run_tests -v
Added contactinfo tag to default.xml and verified that bugurl is used.
Bug: [google internal] b/186220520.
Change-Id: Iaafd6465e072b2e47a0a0b548bf6cb608a0b0a04
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/306342
Tested-by: Raman Tenneti <rtenneti@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
It will be used to let manifest authors self-register contact info.
This element can be repeated, and any later entries will clobber
earlier ones. This would allow manifest authors who extend
manifests to specify their own contact info.
It would have 1 required attribute: bugurl.
"bugurl" specifies the URL to file a bug against the manifest owner.
<contactinfo bugurl="bug-url"/>
TODO: This CL only implements the parsing logic and further work
will be in followup CLs.
Tested the code with the following commands.
$ ./run_tests tests/test_manifest_xml.py
$ ./run_tests -v
Bug: [google internal] b/186220520.
Change-Id: I47e765ba2dab5cdf850191129f4d4cd6b803f451
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/305203
Tested-by: Raman Tenneti <rtenneti@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
partial-clone-exclude option excludes projects during
partial clone. This is a comma-delimited project names
(from manifest.xml). This option is persisted and it
is used by the sync command.
A project that has been unparital'ed will remain unpartial if
that project's name is specified in the --partial-clone-exclude
option. The project name should match exactly.
Added
$ ./run_tests -v
Bug: [google internal] b/175712967
"I can't "unpartial" my androidx-main checkout"
$ rm -rf androidx-main/
$ mkdir androidx-main/
$ cd androidx-main/
$ repo_dev init -u https://android.googlesource.com/platform/manifest -b androidx-main --partial-clone --clone-filter=blob:limit=10M -m default.xml
$ repo_dev sync -c -j8
+ Verify a project is partial
$ cd frameworks/support/
$ git config -l | grep 'partial'
+ Unpartial a project.
$ /google/bin/releases/android/git_repack/git_unpartial
+ Verify project is unpartial
$ git config -l | grep 'partial'
$ cd ../..
+ Exclude the project from being unparial'ed after init and sync.
$ repo_dev init -u https://android.googlesource.com/platform/manifest -b androidx-main --partial-clone --clone-filter=blob:limit=10M --partial-clone-exclude="platform/frameworks/support,platform/frameworks/support-golden" -m default.xml
+ Verify project is unpartial
$ cd frameworks/support/
$ git config -l | grep 'partial'
$ cd ../..
$ repo_dev sync -c -j8
$ cd frameworks/support/
$ git config -l | grep 'partial'
$ cd ../..
+ Remove the project from exclude list and verify that project is partially cloned.
$ repo_dev init -u https://android.googlesource.com/platform/manifest -b androidx-main --partial-clone --clone-filter=blob:limit=10M --partial-clone-exclude= -m default.xml
$ repo_dev sync -c -j8
$ cd frameworks/support/
$ git config -l | grep 'partial'
Change-Id: Id5dba418eba1d3f54b54e826000406534c0ec196
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/303162
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
Re-allow checking out projects to the top of the repo client checkout.
We add checks to prevent checking out files under .repo/ as that path
is only managed by us, and projects cannot inject content or settings
into it.
Bug: https://crbug.com/gerrit/14156
Bug: https://crbug.com/gerrit/14200
Change-Id: Id6bf9e882f5be748442b2c35bbeaee3549410b25
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/299623
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Added the following methods to XmlManifest class.
+ GetDefaultGroupsStr() - return 'default,platform-' + platform.system().lower()
+ GetGroupsStr() - Same as gitc_utils.py's _manifest_groups func.
+ Replaced gitc_utils.py's_manifest_groups calls with GetGroupsStr.
+ Used the above methods to get groups in command.py::GetProjects
and part of init.py.
TODO: clean up these funcs to take structured group data more instead
of passing strings around everywhere that need parsing.
Tested the code with the following commands.
$ ./run_tests -v
Tested the sync code by using repo_dev alias and pointing to this CL
and verified prebuilts/fullsdk-linux directory has all the folders.
Tested repo init and repo sync with --use-superproject and without
--use-superproject argument.
$ repo_dev init -u sso://android.git.corp.google.com/platform/manifest -b androidx-main --partial-clone --clone-filter=blob:limit=10M --repo-rev=main --use-superproject
$ repo_dev sync -c -j32
Bug: [google internal] b/181804931
Bug: https://crbug.com/gerrit/13707
Change-Id: Ia98585cbfa3a1449710655af55d56241794242b6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/299422
Reviewed-by: Jonathan Nieder <jrn@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
Allow the user to specify relative or absolute or any other funky
path that they want when using `repo init` or `repo sync`. Our
goal is to restrict the paths in the remote manifest git repo we
cloned from the network, not protect the user from themselves.
Bug: https://crbug.com/gerrit/14156
Change-Id: I1ccfb2a6bd1dce2bd765e261bef0bbf0f8a9beb6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/298823
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
These attribute values are used to construct local filesystem paths,
so apply the existing filesystem checks to them.
Bug: https://crbug.com/gerrit/14156
Change-Id: Ibcceecd60fa74f0eb97cd9ed1a9792e139534ed4
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/298443
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
This function is currently written with copyfile & linkfile in mind.
Generalize the logic & function arguments slightly so we can reuse
in more places that make sense.
This changes the validation logic slightly too in that we no longer
allow "." for the dest attribute with copyfile & linkfile, nor for
the src attribute with copyfile. We already rejected those later on
when checking against the active filesystem, but now we reject them
a little sooner when parsing.
The empty path check isn't a new requirement exactly -- repo used to
crash on it, so it was effectively blocked, but now we diagnosis it.
Bug: https://crbug.com/gerrit/14156
Change-Id: I0fdb42a3da60ed149ff1997c5dd4b85da70eec3d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/298442
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Python 3 has a simpler super() style so switch to it to make the
code a little simpler and to stop pylint warnings.
Change-Id: I1b3ccf57ae968d56a9a0bcfc1258fbd8bfa3afee
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297383
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Clean up a few linter warnings.
Change-Id: I531d0263a202435d32d83d87ec24998f4051639c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297062
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
As we were testing superproject setting revisionId attribute to SHA and
reloading the manifest, we found out revisionId attribute is not being
saved. Made the change to save the revisionId if it is not being saved.
Tested the code with the following commands.
$ ./run_tests -v
Bug: https://crbug.com/gerrit/13709
Bug: https://crbug.com/gerrit/13707
Tested-by: Raman Tenneti <rtenneti@google.com>
Change-Id: I95fdf655b19648ad3e9aba10b9bed8bb9439deb6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/296182
Reviewed-by: Ian Kasprzak <iankaz@google.com>
At most one superproject may be specified. It will be used
to specify the URL of superproject.
It would have 3 attributes: remote, name, and default.
Only "name" is required while the others have reasonable defaults.
<remote name="superproject-url" review="<url>" />
<superproject remote="superproject-url" name="platform/superproject"/>
TODO: This CL only implements the parsing logic and further work
will be in followup CLs.
Tested the code with the following commands.
$ ./run_tests tests/test_manifest_xml.py
$ ./run_tests -v
Bug: https://crbug.com/gerrit/13709
Tested-by: Raman Tenneti <rtenneti@google.com>
Change-Id: I5b4bba02c8b59601c754cf6b5e4d07a1e16ce167
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/292982
Reviewed-by: Mike Frysinger <vapier@google.com>
We're committed to Python 3 at this point, so purge all the
is_python3 related dynamic checks.
Bug: https://crbug.com/gerrit/10418
Change-Id: I4c8b405d6de359b8b83223c9f4b9c8ffa18ea1a2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/292383
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
We allow project.groups to be whitespace or comma delimited, but
repo-hooks.enabled-list is only whitespace delimited. This hasn't
been a big deal as it's only ever had one valid value, but if we
want to add more, we should harmonize these a bit.
Refactor the groups method to be more generic, and run the enabled-
list attribute through it. Then add missing docs for it.
Change-Id: Iaa96a0faa9c4a68b313b49336751831b73bf855d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/290743
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Attrib groups can now be added to manifest include, thus
all projects in an included manifest file can easily be tagged
with a group without modifying all projects in that manifest file.
Include groups will add and recurse, meaning included manifest
projects will carry all parent includes. Intentionally, no support
added for group remove, to keep complexity down.
Group handling for projects is untouched, meaning a group set on
a project will still append to whatever was or was not inherited
in parent manifest includes, resulting in union of groups inherited
and set for the project itself.
Test: manual multi-level manifest include structure, in serial and parallel,
with different groups set on init
Test: added unit tests to cover the inheritance
Change-Id: Id2229aa6fd78d355ba598cc15c701b2ee71e5c6f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/283587
Tested-by: Fredrik de Groot <fredrik.de.groot@volvocars.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
We conflate the manifest & parsing logic with the management of the
repo client checkout in a single class. This makes testing just one
part (the manifest parsing) hard as it requires a full checkout too.
Start splitting the two apart into separate classes to make it easy
to reason about & test.
Change-Id: Iaf897c93db9c724baba6044bfe7a589c024523b2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/288682
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Sometimes parsing JSON is easier than parsing XML, especially when
the XML format is limited (which ours is). Add a --json option to
the manifest command to quickly emit that form.
Bug: https://crbug.com/gerrit/11743
Change-Id: Ia2bb254a78ae2b70a851638b4545fcafe8c1a76b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/280436
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Using sha1 manifest, project's revisionId is initialized
first by the manifest.
An update of a projet revision by extend-project node does
not apply to the revisionId which is therefore kept to the
initial value.
Resets revisionId value when revision is updated by an
extend-project node.
Change-Id: I873af283890cebaeaabde966f04b125642af929f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/275715
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Miguel Gaio <miguel.gaio@renault.com>
We deprecated this 8 years ago. Time to drop it to simplify the code
as it'll help with refactoring in this module to not migrate it.
Change-Id: I2deae5496d1f66a4491408fcdc95cd527062f8b6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/280798
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Michael Mortensen <mmortensen@google.com>
If the manifest uses a trailing slash on the name attribute, repo
will construct bad internal filesystem paths which confuses tools
later on.
For example, this manifest entry:
<project name="aosp/platform/system/libhidl/" ...
will cause repo to use paths like:
.repo/project-objects/aosp/platform/system/libhidl/.git/
when it really should be using:
.repo/project-objects/aosp/platform/system/libhidl.git
Apply the normalization when we construct the local filesystem paths
as we cannot guarantee that the remote URL constructed from these
will behave the same. A server might really want:
https://example.com/aosp/platform/system/libhidl/
and would throw an error if we instead tried to fetch:
https://example.com/aosp/platform/system/libhidl
Unfortunately, any existing repo client checkouts that use such a
manifest will hit a one-time sync error as the internal git location
has changed. I'm not sure there's a way to cleanly migrate that.
Bug: https://crbug.com/1086043
Change-Id: I30bea0ffd23e478de89a035f408055e48a102658
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/268742
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@digital.ai>
For large projects, clone bundle is useful because it provided a way to
efficiently transfer a large portion of git objects through CDN, without
needing to interact with git server. However, with partial clones, the
intention is to not download most of the objects, so the use of clone
bundles would defeat the space savings normally seen with partial
clones, as they are downloaded before the first fetch.
A new option, --clone-bundle is added to override this behavior.
Add a new repo.clonebundle variable which remembers the choice if
explicitly given from command line at repo init.
Change-Id: I03638474af303a82af34579e16cd4700690b5f43
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/268452
Tested-by: Xin Li <delphij@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
When generating a revision locked manifest, we need to know what
ref to push changes to when doing 'repo upload'. This information
is lost when we lock the revision attribute to a particular commit
hash, so we need to expose it through the dest-branch attribute.
Bug: https://crbug.com/1005103
Test: manual execution
Change-Id: Ib31fd77ad8c9379759c4181dac1ea97de43eec35
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/263572
Tested-by: Sean McAllister <smcallis@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
We've been overly lenient with boolean parsing by ignoring invalid
values as "false" even if the user didn't intend that. Turn all
unknown values into warnings to avoid breaking existing manifests,
and unify the parsing logic in a helper to simplify.
We've been stricter about numbers, but still copying & pasting
inconsistent code. Add a helper for this too. For out of range
sync-j numbers (i.e. less than 1), throw a warning for now, but
mark it for future hard failures.
Change-Id: I924162b8036e6a5f1e31b6ebb24b6a26ed63712d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256457
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Trying to use the config state when the git tree hasn't yet been
created hits bad side effects. Add a check to avoid probing the
config logic during the first run. It's not clear what's going
wrong at the lower layers, but this gets us back to the behavior
before we added worktree support, so lets settle the status quo.
Bug: https://crbug.com/gerrit/12387
Change-Id: I85b56797455f3c2e249d02c18496e060be05501d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256592
Reviewed-by: Xin Li <delphij@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Changing this to a file instead of using a symlink serves two purposes:
* We can insert some comments & doc links to help users learn what this
is for, discover relevant documentation, and to discourage them from
modifying things.
* Windows requires Administrator access to use symlinks. With this
last change, Windows users can get repo client checkouts with the new
--worktree option and not need symlinks anywhere at all. Which means
they no longer need to be an Administrator in order to `repo sync`.
Change-Id: I9bc46824fd8d4b0f446ba84bd764994ca1e597e2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256313
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
We also need to check more things in the manifest/project handlers,
and use platform_utils in a few places to address Windows behavior.
Drop Python 2.7 from Windows testing as it definitely doesn't work
and we won't be fixing it.
Change-Id: I83d00ee9f1612312bb3f7147cb9535fc61268245
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256113
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
This provides initial support for using git worktrees internally
instead of our own ad-hoc symlink tree. It's been lightly tested
which is why it's not currently exposed via --help.
When people opt-in to worktrees in an existing repo client checkout,
no projects are migrated. Instead, only new projects will use the
worktree method. This allows for limited testing/opting in without
having to completely blow things away or get a second checkout.
Bug: https://crbug.com/gerrit/11486
Change-Id: Ic3ff891b30940a6ba497b406b2a387e0a8517ed8
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254075
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
- E301 expected 1 blank line
- E302 expected 2 blank lines
- E303 too many blank lines
- E305 expected 2 blank lines after class or function definition
- E306 expected 1 blank line before a nested definition
Fixed automatically with autopep8:
git ls-files | grep py$ | xargs autopep8 --in-place \
--select E301,E302,E303,E305,E306
Manually fix issues in project.py caused by misuse of block comments.
Change-Id: Iee840fcaff48aae504ddac9c3e76d2acd484f6a9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254599
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: David Pursehouse <dpursehouse@collab.net>
- E121 continuation line under-indented for hanging indent
- E122 continuation line missing indentation or outdented
- E125 continuation line with same indent as next logical line
- E126 continuation line over-indented for hanging indent
- E127 continuation line over-indented for visual indent
- E128 continuation line under-indented for visual indent
- E129 visually indented line with same indent as next logical line
- E131 continuation line unaligned for hanging indent
Fixed automatically with autopep8:
git ls-files | grep py$ | xargs autopep8 --in-place \
--select E121,E122,E125,E126,E127,E128,E129,E131
Change-Id: Ifd95fb8e6a1a4d6e9de187b5787d64a6326dd249
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254605
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: David Pursehouse <dpursehouse@collab.net>
flake8 reports:
E713 test for membership should be 'not in'
Change-Id: I4446be67c431b7267105b53478d2ceba2af758d7
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254451
Tested-by: David Pursehouse <dpursehouse@collab.net>
Reviewed-by: Mike Frysinger <vapier@google.com>
flake8 reports:
W391 blank line at end of file
Change-Id: I5498b2de2d1268d4f1f4b9e1760f9fa93a6da4cd
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254594
Tested-by: David Pursehouse <dpursehouse@collab.net>
Reviewed-by: Mike Frysinger <vapier@google.com>
Some Android/Nest manifests are using <linkfile> with src="." to
create stable paths to specific projects. Allow that specific
use case as it seems reasonable to support.
Bug: https://crbug.com/gerrit/11218
Change-Id: I5eadec257cd58ba0f8687c590ddc250a7a414a85
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254276
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
This commit supports for the 'remote' attribute in
<extend-project>. This avoids the need to perform a <remove-project>
followed by a <project> in local manifests.
Change-Id: I9f9347913337ec9d159bc264d15ce97881ae5398
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/253092
Tested-by: Kyunam Jo <kyunam.jo@gmail.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Reject paths in <copyfile> & <linkfile> that try to use symlinks or
non-file or non-dirs.
We don't fully validate <linkfile> when src is a glob as it's a bit
complicated -- any component in the src could be the glob. We make
sure the destination is a directory, and that any paths in that dir
are created as symlinks. So while this can be used to read any path,
it can't be abused to write to any paths.
Bug: https://crbug.com/gerrit/11218
Change-Id: I68b6d789b5ca4e43f569e75e8b293b3e13d3224b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/233074
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Reject paths in <copyfile> & <linkfile> that point outside of their
respective scopes. This validates paths while parsing the manifest
as this should be quick & cheap: we don't access the filesystem as
this code runs before we've synced.
Bug: https://crbug.com/gerrit/11218
Change-Id: I8e17bb91f3f5b905a9d76391b29fbab4cb77aa58
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/232932
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Michael Mortensen <mmortensen@google.com>
A new option, --partial-clone is added to 'repo init' which tells repo
to utilize git's partial clone functionality, which reduces disk and
bandwidth usage when downloading by omitting blob downloads initially.
Different from restricting clone-depth, the user will have full access
to change history, etc., as the objects are downloaded on demand.
Change-Id: I60326744875eac16521a007bd7d5481112a98749
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/229532
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Xin Li <delphij@google.com>
This takes a single argument (the error message), not multiple
arguments that get formatted implicitly.
Change-Id: Idfbc913ea9f93820edb7e955e9e4f57618c8cd1b
There's no reason to support any other encoding in these files.
This only affects the files themselves and not streams they open.
Bug: https://crbug.com/gerrit/10418
Change-Id: I053cb40cd3666ce5c8a0689b9dd938f24ca765bf
The current implementation ignores the user-specified paths to
manifests. if the "repo diffmanifests" is invoked with absolute
file paths for one or both manifests, the command fails with message:
fatal: duplicate path ... in /tmp/manifest-old.xml
Also the current implementation fails to expand the absolute path to
manifest files if "repo diffmanifests" is invoked with relative
paths, i.e "repo diffmanifests manifest-old.xml manifest-new.xml".
fatal: manifest manifest-old.xml not found
This commit fixes the first issue by disabling the local manifest
discovery for diffmanifests command, and the second issue by
expanding paths to manifests within "diffmanifests" sub-command.
Test: repo manifest --revision-as-HEAD -o /tmp/manifest-old.xml
repo sync
repo manifest --revision-as-HEAD -o /tmp/manifest-new.xml
repo diffmanifests /tmp/manifest-old.xml /tmp/manifest-new.xml
Change-Id: Ia125d769bfbea75adb9aba81abbd8c636f2168d4
Signed-off-by: Vasyl Gello <vasek.gello@gmail.com>
* Add more file i/o wrappers in platform_utils to allow using
long paths (length > MAX_PATH) on Windows.
* Paths using the long path syntax ("\\?\" prefix) should never
escape the platform_utils API surface area, so that this
specific syntax is not visible to the rest of the repo code base.
* Forward many calls from os.xxx to platform_utils.xxx in various place
to ensure long paths support, specifically when repo decides to delete
obsolete directories.
* There are more places that need to be converted to support long paths,
this commit is an initial effort to unblock a few common use cases.
* Also, fix remove function to handle directory symlinks
Change-Id: If82ccc408e516e96ff7260be25f8fd2fe3f9571a
pylint is not used since bb5b1a0. The pyflakes cleanup mentioned in that
commit has not been done, but given that this project is no longer being
actively developed I don't think it's worth spending time doing it.
Leaving the pylint suppressions causes confusion because it leads people
to think that we are still using pylint.
Change-Id: If7d9f280a0f408c780f15915ffdb80579ae21f69
It's convenient to set upstream for all projects in a manifest instead of
repeating the same value for each project.
Change-Id: I946b1de4efb01b351c332dfad108fa7d4f443cba
This change adds support for the 'revision' attribute in
<extend-project>. This avoids the need to perform a <remove-project>
followed by a <project> in local manifests.
Change-Id: Id2834fcfc1ae0d74b3347bed3618f250bf696b1f
Allow the 'default' and 'project' element in the manifest
file to apply "--no-tags" option equivalent.
Change-Id: I7e0f8c17a0e25cca744d45df049076d203c52ff5
Signed-off-by: YOUNG HO CHA <ganadist@gmail.com>
os.remove raises an exception when deleting read-only files on
Windows. Replace all calls with calls to platform_utils.remove,
which deals with deals with that issue.
Change-Id: I4dc9e0c9a36b4238880520c69f5075eca40f3e66
Replace all calls to os.symlink with platform_utils.symlink.
The Windows implementation calls into the CreateSymbolicLinkW Win32
API, as os.symlink is not supported.
Separate the Win32 API definitions into a separate module
platform_utils_win32 for clarity.
Change-Id: I0714c598664c2df93383734e609d948692c17ec5
repo sync can sync submodules via the --fetch-submodules option.
However, if the manifest repo has submodules, those will not be synced.
Having submodules in the manifest repo -- while not commonly done -- can
be useful for inheriting a manifest from another project using <include>
and layering changes on top of it. In this way, you can avoid having to
deal with merge conflicts between your own manifests and the other
project's manifests (for example, if you're managing an Android fork).
Add a --submodule option to init that automatically syncs the submodules
in the manifest repo whenever the manifest repo changes.
Change-Id: I45d34f04517774c1462d7f233f482d1d81a332a8
Signed-off-by: Martin Kelly <mkelly@xevo.com>
repo already special-cases sso:// URLs to behave similarly to https://
and rpc:// elsewhere in repo, but it forgot to do so here.
Noticed when trying to use relative URLs in a manifest obtained using
an sso:// URL.
Change-Id: Ia11469a09bbd6e444dbc4f22c82f9bbe9f5fd083
Allow the 'remote' element in the manifest file to define an optional
'pushurl' attribute which is passed into the .git/config file.
Change-Id: If342d299d371374aedc4440645798888869c9714
Signed-off-by: Steve Rae <steve.rae@raedomain.com>
When the alias attribute is set for a remote, the RemoteSpec attached to
a Project only contains the alias name used by git, not the original
name used in the manifest. But that's not enough information to
reconstruct the manifest, so save off the original manifest name as
another RemoteSpec parameter, only used to write the manifest out.
Bug: Issue 181
Bug: Issue 219
Change-Id: Id7417dfd6ce5572e4e5fe14f22924fdf088ca4f3
This way any changes made to the main manifest are reflected in the gitc
manifest. It's also necessary to use both manifests to sync since the
information required to update the gitc manifest is actually in the repo
manifest.
This also fixes a few issues that came up when testing. notdefault
groups weren't being saved to the gitc manifest in a method that matched
'sync'. The merge branch wasn't always being set to the correct value
either.
Change-Id: I435235cb5622a048ffad0059affd32ecf71f1f5b
This way any changes made to the main manifest are reflected in the gitc
manifest. It's also necessary to use both manifests to sync since the
information required to update the gitc manifest is actually in the repo
manifest.
This also fixes a few issues that came up when testing. notdefault
groups weren't being saved to the gitc manifest in a method that matched
'sync'. The merge branch wasn't always being set to the correct value
either.
Change-Id: I5dbc850dd73a9fbd10ab2470ae4c40e46ff894de
Updates the repo launcher and gitc_utils to pull the manifest
directory location out of the gitc config file.
Change-Id: Id08381b8a7d61962093d5cddcb3ff6afbb13004b
Add repo start support for GITC checkouts. If the user is in
the GITC FS view, they can now run repo start to check out
the sources and create a new working branch.
When "repo start" is called on a GITC project, the revision
tag is set to an empty string and saved in a new tag:
old-revision. This tells the GITC filesystem to display the
local copy of the sources when being viewed. The local copy
is created by pulling the project sources and the new branch
is created based off the original project revision.
Updated main.py to setup each command's gitc_manifest when
appropriate.
Updated repo sync's logic to sync opened projects and
updating the GITC manifest file for the rest.
Change-Id: I7e4809d1c4fc43c69b26f2f1bebe45aab0cae628
This argument wasn't being copied, which caused syncs from generated
manifests to pull down too much of the git history.
Change-Id: I269bab788d4557267c081628b3f8c6aec7744e81
Previously, in running the `manifest` command, we wouldn't output the
upstream if the default upstream would include the pinned sha1.
However, now that fetching refs/heads/* doesn't guarantee that we will
have the sha1, we need to always output the specified upstream branch.
Change-Id: Ib8b409a8ecd439397b38ee9649c530407797f841
Previously, we used a regex that would only remove a phony string from
a url if it existed, but we recently replaced that with a slice. This
change goes back to the previous behavior.
Change-Id: I8baf527be01c4b49d45b903b31a1cd6315563d5b
Instead of using regex, append the netloc and relative
scheme lists with the custom scheme.
The schemes will only be appended when needed, instead
of passing X amount of regex replaces.
see http://bugs.python.org/issue18828 for more details.
Change-Id: I10d26d5ddc32e7ed04c5a412bdd6e13ec59eb70f
This reverts commit 38e4387f8e.
A "repo init" followed by "repo sync" is meant to be as safe as
"git clone". In particular it should not run arbitrary code provided
by the manifest owner.
It would still be nice to have support for manifest-defined git hooks
--- they'd just need a prompt like the upload RepoHook has. Hopefully
a later change can bring them back.
Change-Id: I5ecd90fb5c2ed64f103d856d1ffcba38a47b062d
Signed-off-by: Jonathan Nieder <jrn@google.com>
When working within a team or corporation it is often
useful/required to use predefined git templates. This
change teaches repo to use a per-remote git hook template
structure.
The implementation is done as a continuation of the
existing projecthook functionality. The terminology is
therefore defined as projecthooks.
The downloaded projecthooks are stored in the .repo
directory as a metaproject separating them from the users
project forest.
The projecthooks are downloaded and set up when doing a
repo init and updated for each new repo init.
When downloading a mirror the projecthooks gits are
not added to the bare forest since the intention is to
ensure that the latest are used (allows for company policy
enforcement).
The projecthooks are defined in the manifest file in the
remote element as a subnode, the name refers to the
project name on the server referred to in the remote.
<remote name="myremote ..>
<projecthook name="myprojecthookgit" revision="myrevision"/>
</remote>
The hooks found in the projecthook revision supersede
the stock hooks found in repo. This removes the need for
updating the projecthook gits for repo stock hook changes.
Change-Id: I6796b7b0342c1f83c35f4b3e46782581b069a561
Signed-off-by: Patrik Ryd <patrik.ryd@stericsson.com>
Signed-off-by: Ian Kumlien <ian.kumlien@gmail.com>
'upstream' attribute is now transferred to the new manifest xml
that is created when using command 'repo manifest -o -'.
Manifest help is updated for the attributes 'sync-c','sync-s' and
'sync-j'.
Bug: Issue 164
Change-Id: If63f781e91d25c5b5b5ea0696b0c04337b0a686a
Currently, if a local manifest wants to add groups to an existing
project, it must use remove-project and then re-add the project with
the new groups. This makes the local manifest more fragile, requiring
updates to the local manifest if the original manifest changes.
Add a new extend-project tag, which supports adding groups to an
existing project.
Change-Id: Ib4d1352efd722a65dd263d02644b9ea5ab6ed400
Some projects use multiple remotes.
In some cases these remotes have different naming conventions.
Add an option to define a revision in the remote configuration.
The `project` revision takes precedence over `remote` and `default`.
The `remote` revision takes precedence over `default`.
The `default` revision acts as a fall back as it originally did.
Change-Id: I2b376160d45d48b0bab840c02a3eef1a1e32cf6d
dict.keys() produces a dict_keys object in Python 3, which does
not support .sort(). Use sorted() which will give the same outcome.
Change-Id: If6b33db07a31995b4e44959209d08d8fb74ae339
dict.values() produce dict_values objects rather than list objects.
Convert this to a list to maintain functionality with certain functions.
Change-Id: Ie76269e19f8d68479a1d7ae03aa965252d759a9e
It's just like copyfile and runs at the same time as copyfile but
instead of copying it creates a symlink instead. This is needed
because copyfile copies the target of the link as opposed to the
symlink itself.
Change-Id: I7bff2aa23f0d80d9d51061045bd9c86a9b741ac5
Commit 8d201 "repo: Support multiple branches for the same project."
(Change id is I5e2f4e1a7abb56f9d3f310fa6fd0c17019330ecd) caused missing
mirroring manifest repository when 'repo sync' after 'repo init --mirror'.
When the function _AddMetaProjectMirror() is called to add two of
meta projects - git-repo itself and manifest repository to mirror,
it didn't add them into self._paths which has list of projects to be
sync'ed by 'repo sync'.
In addition, because member var of Project 'relpath' is used as a key
of self._paths, it should be set with proper value other than None.
Since this is only for meta projects which are not described in manifest
xml, 'relpath' is name of the projects.
Change-Id: Icc3b9e6739a78114ec70bf54fe645f79df972686
Signed-off-by: Kwanhong Lee <kwanhong.lee@windriver.com>
This command allows a deeper diff between two manifest projects.
In addition to changed projects, it displays the logs of the
commits between both revisions for each project.
Change-Id: I86d30602cfbc654f8c84db2be5d8a30cb90f1398
Signed-off-by: Julien Campergue <julien.campergue@parrot.com>
Previously, we would remove 'persistent-' then tack it on at the end
if it had been previously found. However, this would ignore urljoin's
decision on whether or not the second path was relative. Instead, we
were always assuming it was relative and that we didn't want to use
a different absolute url with a different protocol.
This change handles persistent-https:// in the same way we handled the
absense of an explicit protocol. The only difference is that this time
instead of temporarily replacing it with 'gopher://', we use 'wais://'.
Change-Id: I6e8ad1eb4b911931a991481717f1ade01315db2a
In CL:50715, I updated repo to handle multiple projects, but the
remove-projects code path was not updated accordingly. Update it.
Change-Id: Icd681d45ce857467b584bca0d2fdcbf24ec6e8db
This significantly reduces sync time and used brandwidth as only
a tar of each project's revision is checked out, but git is not
accessible from projects anymore.
This is relevant when git is not needed in projects but sync
speed/brandwidth may be important like on CI servers when building
several versions from scratch regularly for example.
Archive is not supported over http/https.
Change-Id: I48c3c7de2cd5a1faec33e295fcdafbc7807d0e4d
Signed-off-by: Julien Campergue <julien.campergue@parrot.com>
git-repo uses 2 space indentation. A couple of recent changes
introduced 4 space indentation in some modules.
Change-Id: Ia4250157c1824c1b5e7d555068c4608f995be9da
It is often useful to be able to include the same project more than
once, but with different branches and placed in different paths in the
workspace. Add this feature.
This CL adds the concept of an object directory. The object directory
stores objects that can be shared amongst several working trees. For
newly synced repositories, we set up the git repo now to share its
objects with an object repo.
Each worktree for a given repo shares objects, but has an independent
set of references and branches. This ensures that repo only has to
update the objects once; however the references for each worktree are
updated separately. Storing the references separately is needed to
ensure that commits to a branch on one worktree will not change the
HEAD commits of the others.
One nice side effect of sharing objects between different worktrees is
that you can easily cherry-pick changes between the two worktrees
without needing to fetch them.
Bug: Issue 141
Change-Id: I5e2f4e1a7abb56f9d3f310fa6fd0c17019330ecd
Currently, an error is raised if more than one default is defined.
When including another manifest, it is likely that a default has
been defined in both manifests.
Don't raise an error if all the defaults defined have the same
attributes.
Change-Id: I2603020687e2ba04c2c62c3268ee375279b34a08
Signed-off-by: Julien Campergue <julien.campergue@parrot.com>
Previously, change I7150e449341ed8655d398956a095261978d95870
had broken alias support in order to fix the manifest command to keep
it from spitting projects that point to an alias that wasn't recorded.
This commit reverts that commit and instead solves the issue more
correctly, outputting the alias in the remote node of the manifest and
respecting that alias when outputting the list of projects.
Change-Id: I941fc4adb7121d2e61cedc5838e80d3918c977c3
This is to avoid the following AttributeError:
line 681, in _ParseProject
AttributeError: '_Default' object has no attribute 'destBranchExpr'
Change-Id: Ia9f7e2cce1409d22d71bc8a74b33edf2b27702ca
Revert "Fix "'module' object is not callable" error", and fix it properly.
* The urlparse module is renamed to urllib.parse in Python 3.
* This commit fixes the code to use "urllib.parse.urlparse"
instead of creating a new module urlib and setting
urlib.parse to urlparse.urlparse.
* Fixes an AttributeError:
'function' object has no attribute 'uses_relative'
This reverts commit cd51f17c64.
Change-Id: I48490b20ecd19cf5a6edd835506ea5a467d556ac
In a couple of files the urlparse method was not being set up
correctly for python < 3 and this resulted in an error being
thrown when trying to call it.
Change-Id: I4d2040ac77101e4e228ee225862f365ae3d96cec
This adds the ability to have reviews pushed to a different branch
from the one on which changes are based. This is useful for "gateway"
systems without smartsync.
Change-Id: I3a8a0fabcaf6055e62d3fb55f89c944e2f81569f
Add a new module with methods for checking the Python version.
Instead of handling Python3 imports with try...except blocks, first
check the python version and then import the relevant modules. This
makes the code a bit cleaner and will result in less diff when/if we
remove support for Python < 3 later.
Use the same mechanism to handle `input` vs. `raw_input` and add
suppression of pylint warnings caused by redefinition of the built-in
method `input`.
Change-Id: Ia403e525b88d77640a741ac50382146e7d635924
Also-by: Chirayu Desai <cdesai@cyanogenmod.org>
Signed-off-by: Chirayu Desai <cdesai@cyanogenmod.org>
* Fix imports.
* Use python3 syntax.
* Wrap map() calls with list().
* Use list() only wherever needed.
(Thanks Conley!)
* Fix dictionary iteration methods
(s/iteritems/items/).
* Make use of sorted() in appropriate places
* Use iterators directly in the loop.
* Don't use .keys() wherever it isn't needed.
* Use sys.maxsize instead of sys.maxint
TODO:
* Make repo work fully with python3. :)
Some of this was done by the '2to3' tool [1], by
applying the needed fixes in a way that doesn't
break compatibility with python2.
Links:
[1]: http://docs.python.org/2/library/2to3.html
Change-Id: Ibdf3bf9a530d716db905733cb9bfef83a48820f7
Signed-off-by: Chirayu Desai <cdesai@cyanogenmod.org>
In some cases, especially when local manifest files exist, users may want
to force the mirrored repositories to be created in folders according to
their 'path' attribute in the manifest, rather than according to the name
of the repositories.
To enable this functionality for specified mirror, add a new attribute
'force-path' for that project in the manifest, set its value to 'true'.
Change-Id: I61df8c987a23d84309b113e7d886ec90c838a6cc
Signed-off-by: Scott Fan <fancp2007@gmail.com>
