This can take a few seconds, if not a lot more, so add a progress bar
so users understand what's going on.
Change-Id: I5b4b54c1bbb9ec18728f979521310f7087afaa5c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/302802
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The current logic has a downside in that it doesn't sync to the latest
signed version available if the latest commit itself is unsigned. This
can come up when using the "main" branch as it is sometimes signed, but
often not as it's holding the latest merged commits. When people use
the main branch, it's to get early testing on versions tagged but not
yet released, and we don't want them to get stuck indefinitely on that
old version of repo.
For example, this series of events:
* "stable" is at v2.12.
* "main" is tagged with v2.13.
* early testers use --repo-rev main to get v2.13.
* new commits are merged to "main".
* "main" is tagged with v2.14.
* new commits are merged to "main".
* devs who had synced in the past to test v2.13 are stuck on v2.13.
repo sees "main" is unsigned and so doesn't try to upgrade at all.
The only way to get unwedged is to re-run `repo init --repo-rev main`,
or to manually sync once with repo verification disabled, or for us to
leave "main" signed for a while and hope devs will sync in that window.
The new logic is that whenever changes are available, we switch to the
latest signed tag. We also replace some of the duplicated verification
code in the sync command with the newer wrapper logic. This handles a
couple of important scenarios inaddition to above:
* rollback (e.g. v2.13.8 -> v2.13.7)
* do not trash uncommitted changes (in case of ad-hoc testing)
* switch tag histories (e.g. v2.13.8 -> v2.13.8-cr1)
Change-Id: I5b45ba1dd26a7c582700ee3711f303dc7538579b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/300122
Reviewed-by: Jonathan Nieder <jrn@google.com>
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
This avoids GIL limitations with using threads for parallel processing.
This reworks the fetch logic to return results for processing in the
main thread instead of leaving every thread to do its own processing.
We have to tweak the chunking logic a little here because multiprocessing
favors batching over returning immediate results when using a larger value
for chunksize. When a single job can be quite slow, this tradeoff is not
good UX.
Bug: https://crbug.com/gerrit/12389
Change-Id: I0f0512d15ad7332d1eb28aff52c29d378acc9e1d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/298642
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Tested the code with the following commands.
$ ./run_tests -v
Bug: [google internal] b/183232698
Bug: https://crbug.com/gerrit/13707
$ repo_dev init -u sso://android.git.corp.google.com/platform/manifest -b master --partial-clone --clone-filter=blob:limit=10M --repo-rev=main --use-superproject
$ repo_dev sync --use-superproject
$ repo_dev sync
real 0m8.046s
user 0m2.866s
sys 0m2.457s
Second time repo sync took only 8 seconds and verified by printing that
urrent_branch_only is True in project.py's Sync_NetworkHalf function.
Change-Id: Ic48efb23ea427dfa36e12a5c49973d6ae776d818
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/301182
Tested-by: Raman Tenneti <rtenneti@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
The refactor to multiprocessing broke status reporting slightly when
checking out projects. Make sure we mark the step as failed if any
of the projects failed, not just when --fail-fast is set.
Change-Id: I0efb56ce83b068b2c334046df3fef23d797599c9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/299882
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Superproject objects accept the optional argument “quiet”.
The following progress messages are displayed if quiet is false.
Displayed the following message whenever we find we have to make a new
folder (aka new remote), because if you started with repo init android
and later do googleplex-android that is when it will be slow.
"<location>: Performing initial setup for superproject; this might take
several minutes.".
After fetch completion, added the following notification:
"<location>: Initial setup for superproject completed."
Tested the code with the following commands.
$ ./run_tests -v
Tested the sync code by using repo_dev alias and pointing to this CL.
$ repo_dev init -u persistent-https://googleplex-android.git.corp.google.com/platform/manifest -b rvc-dev --partial-clone --clone-filter=blob:limit=10M --repo-rev=main --use-superproject
Bug: [google internal] b/181178282
Bug: https://crbug.com/gerrit/13707
Change-Id: Ia7fb85c6fb934faaa90c48fc0c55e7f41055f48a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/299122
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
This avoids GIL limitations with using threads for parallel processing.
In a CrOS checkout with ~1000 repos, the nop case goes from ~6 sec down
to ~4 sec with -j8. Not a big deal, but shows that this actually works
to speed things up unlike the threading model.
This reworks the checkout logic to return results for processing in the
main thread instead of leaving every thread to do its own processing.
Bug: https://crbug.com/gerrit/12389
Change-Id: I143e5e3f7158e83ea67e2d14e5552153a874248a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/298063
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The default sync output should show a progress bar only for successful
commands, and the error output for any commands that fail. Implement
that policy here.
Bug: https://crbug.com/gerrit/11293
Change-Id: I85716032201b6e2b45df876b07dd79cb2c1447a5
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297905
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The idea for skipping some progress updates was to avoid spending
too much time on the progress bar itself. Unfortunately, for large
projects (100s if not 1000s) of repos, we get into the situation
with large/slow checkouts that we skip showing updates when a repo
finishes, but not enough repos finished to increase the percent.
Since the progress bar should be relatively fast compared to the
actual network & local dick operations, have it show an update
whenever the caller requests it. A test with ~1000 repos shows
that the progress bar in total adds <100ms.
Bug: https://crbug.com/gerrit/11293
Change-Id: I708a0c4bd923c59c7691a5b48ae33eb6fca4cd14
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297903
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
If --use-superproject is passed as argument to "repo init", then
--use-superproject need not be specified during "repo sync".
Tested the code with the following commands.
$ time repo_dev sync -c -j32
...
WARNING: --use-superproject is experimental and not for general use
Bug: https://crbug.com/gerrit/13709
Bug: https://crbug.com/gerrit/13707
Change-Id: Ibb33f3038a2515f74a6c4f7cb785d354b26ee680
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/298102
Tested-by: Raman Tenneti <rtenneti@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Ian Kasprzak <iankaz@google.com>
Python 3 renamed this method from isSet to is_set.
Change-Id: I8f9bb0b302d55873bed3cb20f2d994fa2d082157
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297742
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Extend the Command class to support adding the --jobs option to the
parser if the command declares it supports running in parallel. Also
pull the default value used for the number of local jobs into the
command module so local commands can share it.
Change-Id: I22b0f8d2cf69875013cec657b8e6c4385549ccac
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297024
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Clean up a few linter warnings.
Change-Id: I531d0263a202435d32d83d87ec24998f4051639c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297062
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The code is a bit simpler & easier to reason about.
Change-Id: I149729c7d01434b08b58cc9715dcf0f0d11201c2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297022
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Added --no-use-superproject to repo and init.py to disable use of
manifest superprojects.
Replaced the term "sha" with "commit id".
Added _GetBranch method to Superproject object.
Moved shared code between init and sync into SyncSuperproject function.
This function either does git clone or git fetch. If git fetch fails
it does git clone.
Changed Superproject constructor to accept manifest, repodir and branch
to avoid passing them to multiple functions as argument.
Changed functions that were raising exceptions to return either True
or False.
Saved the --use-superproject option in config as repo.superproject.
Updated internal-fs-layout.md document.
Updated the tests to work with the new API changes in Superproject.
Performance for the first time sync has improved from 20 minutes to
around 15 minutes.
Tested the code with the following commands.
$ ./run_tests -v
Tested the sync code by using repo_dev alias and pointing to this CL.
$ repo init took around 20 seconds longer because of cloning of superproject.
$ time repo_dev init -u sso://android.git.corp.google.com/platform/manifest -b master --partial-clone --clone-filter=blob:limit=10M --repo-rev=main --use-superproject
...
real 0m35.919s
user 0m21.947s
sys 0m8.977s
First run
$ time repo sync --use-superproject
...
real 16m41.982s
user 100m6.916s
sys 19m18.753s
No difference in repo sync time after the first run.
Bug: [google internal] b/179090734
Bug: https://crbug.com/gerrit/13709
Bug: https://crbug.com/gerrit/13707
Change-Id: I12df92112f46e001dfbc6f12cd633c3a15cf924b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/296382
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
We have access to repodir on the command object itself, so we don't
need to pull it indirectly out of the manifest object.
Change-Id: I8688fb1c84979825efa966dc787e78c6f7ba3823
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/296542
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Changed "git pull" to "git fetch" as we are using --bare option. Used the
following command to fetch:
git fetch origin +refs/heads/*:refs/heads/* --prune
Pass --branch argument to Superproject's UpdateProjectsRevisionId function.
Returned False/None when directories don't exist instead of raise
GitError exception from _Fetch and _LsTree functions. The caller of Fetch
does Clone if Fetch fails.
Tested the code with the following commands.
$ ./run_tests -v
Tested the init and sync code by copying all the repo changes into my Android
AOSP checkout and running repo sync with --use-superproject option.
Bug: https://crbug.com/gerrit/13709
Bug: https://crbug.com/gerrit/13707
Tested-by: Raman Tenneti <rtenneti@google.com>
Change-Id: I3e441ecdfc87c735f46eff0eb98efa63cc2eb22a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/296222
Reviewed-by: Mike Frysinger <vapier@google.com>
After updating all project’s revsionIds with the SHAs from superproject,
write the updated manifest into superproject_override.xml file. Reload
that file for future Reloads. This file is created in exp-superproject
directory.
Moved most of the code that is superproject specific into
git_superproject.py and wrote test code.
If git pull fails, did a git clone of the superproject.
We saw performance gains for consecutive repo sync's. The time to sync
went down from around 120 secs to 40 secs when repo sync is executed
consecutively.
Tested the code with the following commands.
$ ./run_tests -v tests/test_git_superproject.py
$ ./run_tests -v
Tested the sync code by copying all the repo changes into my Android
AOSP checkout and doing a repo sync --use-superproject twice.
First run
$ time repo sync --use-superproject
...
real 21m3.745s
user 97m59.380s
sys 19m11.286s
After two consecutive sync runs
$ time repo sync -c -j8 --use-superproject
real 0m39.626s
user 0m29.937s
sys 0m38.155s
Bug: https://crbug.com/gerrit/13709
Bug: https://crbug.com/gerrit/13707
Tested-by: Raman Tenneti <rtenneti@google.com>
Change-Id: Id79a0d7c4d20babd65e9bd485196c6f8fbe9de5e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/296082
Reviewed-by: Ian Kasprzak <iankaz@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
Added "--use-superporject" option to sync.py to fetch project SHAs from
superproject. If there are any missing projects in superprojects, it
prints the missing entries and exits. If there are no missing entries,
it will use SHAs from superproject to fetch the projects from git.
Tested the code with the following commands.
$ ./run_tests tests/test_manifest_xml.py
$ ./run_tests -v tests/test_git_superproject.py
$ ./run_tests -v
Tested the sync code by copying all the repo changes into my Android
AOSP checkout and adding <superporject> tag to default.xml. With
local modification to the code to print the status,
.../WORKING_DIRECTORY$ repo sync --use-superproject
repo: executing 'git clone' url: sso://android/platform/superproject
repo: executing 'git ls-tree'
Success: []
Bug: https://crbug.com/gerrit/13709
Tested-by: Raman Tenneti <rtenneti@google.com>
Change-Id: Id18665992428dd684c04b0e0b3a52f46316873a0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/293822
Reviewed-by: Mike Frysinger <vapier@google.com>
We're committed to Python 3 at this point, so purge all the
is_python3 related dynamic checks.
Bug: https://crbug.com/gerrit/10418
Change-Id: I4c8b405d6de359b8b83223c9f4b9c8ffa18ea1a2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/292383
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The --force-sync option was being passed down for all updates except
for the manifest project, so add that there too.
Bug: https://crbug.com/gerrit/11034
Change-Id: I33818b652f828c6b847dbc70f1fedfac5ac17bbe
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/228146
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
For large projects, clone bundle is useful because it provided a way to
efficiently transfer a large portion of git objects through CDN, without
needing to interact with git server. However, with partial clones, the
intention is to not download most of the objects, so the use of clone
bundles would defeat the space savings normally seen with partial
clones, as they are downloaded before the first fetch.
A new option, --clone-bundle is added to override this behavior.
Add a new repo.clonebundle variable which remembers the choice if
explicitly given from command line at repo init.
Change-Id: I03638474af303a82af34579e16cd4700690b5f43
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/268452
Tested-by: Xin Li <delphij@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
Add retries with exponential backoff and jitter to the fetch
operations. By default don't change behavior and enable
behind the new flag '--fetch-retries'.
Bug: https://crbug.com/1061473
Change-Id: I492710843985d00f81cbe3402dc56f2d21a45b35
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/261576
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: George Engelbrecht <engeg@google.com>
We refer to this as "revision" in help text, and in REPO_REV envvar,
so rename to --repo-rev to be consistent. We keep --repo-branch for
backwards compatibility, but as a hidden option.
Bug: https://crbug.com/gerrit/11045
Change-Id: I1ecc282fba32917ed78a63850360c08469db849a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/259352
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Since tracking a branch prevents repo from updating, make sure we
warn people about the situation when using `repo sync`.
Bug: https://crbug.com/gerrit/11045
Change-Id: I966513f510827cc93194f8df176c6745946bd739
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/258892
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
This is a dict to index, not a function to call.
Change-Id: I0117eeaaa8b2ef4762ab6f0d22f9ffdaee961f52
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/258132
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
- E129 visually indented line with same indent as next logical line
- E125 continuation line with same indent as next logical line
Fixed automatically by:
autopep8 --in-place --select E125,E129 subcmds/sync.py
Change-Id: Ia2f82f443e1e6a23ba22c6f9849c8485405aed0e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256092
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: David Pursehouse <dpursehouse@collab.net>
Since deleting a source checkout involves a good bit of internal
knowledge of .repo/, move the DeleteProject helper out of the sync
code and into the Project class itself. This allows us to add git
worktree support to it so we can unlock/unlink project checkouts.
Change-Id: If9af8bd4a9c7e29743827d8166bc3db81547ca50
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256072
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When using extensions, make sure we set the git repo format version
so git knows to check the extension compatibility. We can add a
helper to the Project API to simplify this and make it foolproof.
Change-Id: I9ab6c32d92fe2b8e5df6e2b080ca71556332e909
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256035
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
This provides initial support for using git worktrees internally
instead of our own ad-hoc symlink tree. It's been lightly tested
which is why it's not currently exposed via --help.
When people opt-in to worktrees in an existing repo client checkout,
no projects are migrated. Instead, only new projects will use the
worktree method. This allows for limited testing/opting in without
having to completely blow things away or get a second checkout.
Bug: https://crbug.com/gerrit/11486
Change-Id: Ic3ff891b30940a6ba497b406b2a387e0a8517ed8
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254075
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Different Python & OS versions have different environ behavior wrt
accepted types & encoding. Since we're migrating to be Python 3 only,
lets change our code to assume strings always work as that's what the
newer Python 3 does. This will fail under Python 2 for some env vars,
mostly on Windows, but the effort of maintaining shim layers that can
handle these edge cases isn't worth it when we're dropping that code.
We leave the logic in the `repo` launcher for now as it is simple, and
we want it to be able to switch versions a bit longer than the rest of
the tree.
Here's the support table:
| *NIX | Windows |
Python 2 | ASCII string | str or bytes, not unicode |
Python 3 | str or bytes | str only |
Windows uses strings natively in its environment all the time. But it
doesn't allow unicode strings under Python 2, so we have to encode.
Python 2 on *NIX is funky in that it always lowers to ASCII, so we had
to manually encode to avoid errors regardless of unicode or str.
Python 3 on Windows & *NIX will accept strings. *NIX will also accept
bytes but Windows will not.
Bug: https://crbug.com/gerrit/12145
Change-Id: I3cf8f95a06902754ea1f08ad4b28503f7063531b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/248972
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Trying to use booleans with names like "no_xxx" are hard to follow due
to the double negatives. Invert all of them so we only have positive
meanings to follow.
Change-Id: Ifd37d0368f97034d94aa2cf38db52c723ac0c6ed
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255493
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Named Temporary file defaults to mode 'w+b' which causes repo sync to
fail. By opening the tmpcookiefile in PersistentTransport.request as
writable, we are able to run sync successfully.
Bug: https://crbug.com/gerrit/12370
Test: Ran smartsync successfully
Change-Id: I01ddf915fc30eb3ff0e4d440a6f1aa261c63e88d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255692
Tested-by: Jonathan Nieder <jrn@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
This allows us to control sync output better by having three levels
of output: quiet (only errors), default (progress bars), verbose (all
the things). For now, we just put the chatty "already have persistent
ref" message behind the verbose level.
Bug: https://crbug.com/gerrit/11293
Change-Id: Ia61333fd8085719f3e99edb7b466cdb04031b67f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255414
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Some people find the existing output to be a bit confusing. It spews
a lot of git output before exiting, but it's not exactly clear what
the final state is when things pass. Add an explicit message.
Bug: https://crbug.com/gerrit/10501
Change-Id: I9de83b595d3185feb820005b8fc81c6adc55b357
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254732
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
We've been requiring git-1.7.2 since Oct 2012, so we can safely drop
the individual checks sprinkled throughout the code base for older.
Change-Id: I1737fff7b3f27f475960b0bff9cb300aefd5d108
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/253135
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
flake8 reports:
E722 do not use bare 'except'
Replace them with 'except Exception' per [1] which says:
Bare except will catch exceptions you almost certainly don't want
to catch, including KeyboardInterrupt (the user hitting Ctrl+C) and
Python-raised errors like SystemExit
If you don't have a specific exception you're expecting, at least
except Exception, which is the base type for all "Regular" exceptions.
[1] https://stackoverflow.com/a/54948581
Change-Id: Ic555ea9482645899f5b04040ddb6b24eadbf9062
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254606
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: David Pursehouse <dpursehouse@collab.net>
- E301 expected 1 blank line
- E302 expected 2 blank lines
- E303 too many blank lines
- E305 expected 2 blank lines after class or function definition
- E306 expected 1 blank line before a nested definition
Fixed automatically with autopep8:
git ls-files | grep py$ | xargs autopep8 --in-place \
--select E301,E302,E303,E305,E306
Manually fix issues in project.py caused by misuse of block comments.
Change-Id: Iee840fcaff48aae504ddac9c3e76d2acd484f6a9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254599
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: David Pursehouse <dpursehouse@collab.net>
- E121 continuation line under-indented for hanging indent
- E122 continuation line missing indentation or outdented
- E125 continuation line with same indent as next logical line
- E126 continuation line over-indented for hanging indent
- E127 continuation line over-indented for visual indent
- E128 continuation line under-indented for visual indent
- E129 visually indented line with same indent as next logical line
- E131 continuation line unaligned for hanging indent
Fixed automatically with autopep8:
git ls-files | grep py$ | xargs autopep8 --in-place \
--select E121,E122,E125,E126,E127,E128,E129,E131
Change-Id: Ifd95fb8e6a1a4d6e9de187b5787d64a6326dd249
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254605
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: David Pursehouse <dpursehouse@collab.net>
flake8 reports:
E713 test for membership should be 'not in'
Change-Id: I4446be67c431b7267105b53478d2ceba2af758d7
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254451
Tested-by: David Pursehouse <dpursehouse@collab.net>
Reviewed-by: Mike Frysinger <vapier@google.com>
flake8 reports:
W391 blank line at end of file
Change-Id: I5498b2de2d1268d4f1f4b9e1760f9fa93a6da4cd
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254594
Tested-by: David Pursehouse <dpursehouse@collab.net>
Reviewed-by: Mike Frysinger <vapier@google.com>
Some automatic git operations will prune objects on us, and not just
the gc step. Normally we don't care, but with shared projects, we
will have multiple git checkouts with refs that the others cannot
see, but with a shared object dir. Any pruning of objects based on
refs in just one repo can easily break the others.
git-2.7.0 introduced a preciousObjects setting which tells git to
never prune objects for this exact scenario: there might be refs in
some location that git is unable to see.
Change-Id: I781de27c5bbe1d4c70f0187566141c9cce088bd8
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254392
Reviewed-by: Nasser Grainawi <nasser@codeaurora.org>
Reviewed-by: David Riley <davidriley@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Currently our default behavior is:
* Try to sync all repos
* If any errors seen, exit
* Try to garbage collect all repos
* If any errors seen, exit
* Try to update local project list
* If any errors seen, exit
* Try to checkout out all local repos
* If any errors seen, exit
Users find these incomplete syncs confusing, so lets try to complete
as much as possible by default and printing out summaries at the end.
Bug: https://crbug.com/gerrit/11293
Change-Id: Idd17cc9c3bbc574d8a0f08a30225dec7bfe414cb
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/238554
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The use case is any situation where your manifest does
not exist on server, but where you still want to do
full sync for the projects, without having your
workspace manifest switched to other branch or
forwarded to latest or similar.
This allows syncing to a historical manifest in git log,
that does not have a branch, as well as when integrating
something together that has not been pushed upstream yet.
Changes can also exist locally on a manifest that is
behind head, meaning not requiring rebase to latest.
Tested using:
$ cd .repo/manifests/
$ git checkout <any hash 1>
$ <do local modifications>
$ repo sync --no-manifest-update
$ git checkout <any hash 2>
$ repo sync --no-manifest-update
Change-Id: I0c9773aa8bc5876813a2e7d7fec697abcb2d9e94
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/246445
Tested-by: Fredrik de Groot <fredrik.de.groot@volvocars.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
The current sync output displays "Fetching project" and "Checking out
project" messages and progress bar updates independently leading to a
lot of spam. Lets merge these periodic outputs with the status bar to
get a little bit tighter output in the normal case. This doesn't solve
all our problems, but gets us closer.
Bug: https://crbug.com/gerrit/11293
Change-Id: Icd627830af4dd934a9355b7ace754b56dc96cfef
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/244934
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
When repo sync fails because some git trees are not in clean state and
as such can not be rebased automatically, it is a pain to figure out
which trees are the culprits.
With this patch the list of offending trees is printed when repo sync
reports checkout errors.
TEST=ran 'repo sync' and observed the proper list of directories show
up after the final error message
Bug: https://crbug.com/gerrit/11293
Change-Id: Icdf1a03e9014ecb184f331f513cc9a2efc7d11ed
Signed-off-by: Vadim Bendebury <vbendeb@google.com>
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/244053
Reviewed-by: Mike Frysinger <vapier@google.com>
Use open() as a context manager to simplify the close logic and make
the code easier to read & understand. This is also more Pythonic.
Change-Id: I579d03cca86f99b2c6c6a1f557f6e5704e2515a7
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/244734
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Cut out some more standalone code from Execute to make this func a
bit more manageable. The manifest project update is pretty simple
and standalone, but still takes up a good chunk of what's left.
Change-Id: Idc2442d9def495eccd0a49cda203c44aef16f129
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/236614
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
The smart sync logic takes up about 45% of the overall Execute func
and is about 100 lines of code. The only effect it has on the rest
of the code is to set the manifest_name variable. Since this func
is already quite huge, split the smart sync logic out.
Change-Id: Id861849b0011ab47387d74e92c2ac15afcc938ba
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/234835
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
In commit d9e5cf0e ("sync: invert --force-broken with --fail-fast") the
force-broken option has been deprecated. Accidentally the option has
been changed from Boolean to Value. This breaks all users of repo with:
main.py: error: -f option requires an argument
This is easy to avoid by keeping the type.
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Change-Id: Ia8b589cf41ac756d10c61e17ec8d76ba8f7031f9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/235043
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
A common pattern in our subcommands is to verify the arguments &
options before executing things. For some subcommands, that check
stage is quite long which makes the execution function even bigger.
Lets split that logic out of the execute phase so it's easier to
manage these.
This is most noticeable in the sync subcommand whose Execute func
is quite large, and the option checking makes up ~15% of it.
The manifest command's Execute can be simplified significantly as
the optparse configuration always sets output_file to a string.
Change-Id: I7097847ff040e831345e63de6b467ee17609990e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/234834
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
People seem to not expect the sync process to halt immediately if an
error is encountered. It's also basically guaranteed to leave their
tree in an incomplete state. Lets invert the default behavior so we
attempt to sync (both fetch & checkout) all projects. If an error is
hit, we still exit(1) and show it at the end.
If people want the sync to abort quickly, they can use the new option
--fail-fast.
Bug: https://crbug.com/gerrit/11293
Change-Id: I49dd6c4dc8fd5cce8aa905ee169ff3cbe230eb3d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/234812
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Callers don't actually see -1 (they'll usually see 255, but the exact
answer here is complicated). Just switch to 1 as that's the standard
value tools use to indicate an error.
Change-Id: Ib712db1924bc3e5f7920bafd7bb5fb61f3bda44f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/233553
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
The partial clone rework (commit 745be2ede1
"Add support for partial clone") changed the behavior when a single repo
hit a failure: it would always call sys.exit() immediately. This isn't
even necessary as we already pass down an error event object which the
workers set and the parent checks. Just delete the exit entirely.
Change-Id: Id72d8642aefa2bde24e1a438dbe102c3e3cabf48
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/233552
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
A new option, --partial-clone is added to 'repo init' which tells repo
to utilize git's partial clone functionality, which reduces disk and
bandwidth usage when downloading by omitting blob downloads initially.
Different from restricting clone-depth, the user will have full access
to change history, etc., as the objects are downloaded on demand.
Change-Id: I60326744875eac16521a007bd7d5481112a98749
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/229532
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Xin Li <delphij@google.com>
Neither of the fields here expect floats so make sure we use integer
division when calculating things.
Bug: https://crbug.com/gerrit/10418
Change-Id: Ibda068b16a7bba7ff3efba442c4bbff4415caa6e
There's no reason to support any other encoding in these files.
This only affects the files themselves and not streams they open.
Bug: https://crbug.com/gerrit/10418
Change-Id: I053cb40cd3666ce5c8a0689b9dd938f24ca765bf
Forcefully remove dirty projects if option '--force-remove-dirty' is given.
The '--force-remove-dirty' option can be used to remove previously used
projects with uncommitted changes. WARNING: This may cause data to be lost
since uncommitted changes may be removed with projects that no longer exist
in the manifest.
Change-Id: I844a6e943ded522fdc7b1b942c0a1269768054bc
* Add more file i/o wrappers in platform_utils to allow using
long paths (length > MAX_PATH) on Windows.
* Paths using the long path syntax ("\\?\" prefix) should never
escape the platform_utils API surface area, so that this
specific syntax is not visible to the rest of the repo code base.
* Forward many calls from os.xxx to platform_utils.xxx in various place
to ensure long paths support, specifically when repo decides to delete
obsolete directories.
* There are more places that need to be converted to support long paths,
this commit is an initial effort to unblock a few common use cases.
* Also, fix remove function to handle directory symlinks
Change-Id: If82ccc408e516e96ff7260be25f8fd2fe3f9571a
Since gitiles recommends using # headers over ---/=== underlines,
change the manifest-format.md over and all our help texts.
Change-Id: I96391d41fba769e9f26870d497cf7cf01c8d8ab3
os.remove raises an exception when deleting read-only files on
Windows. Replace all calls with calls to platform_utils.remove,
which deals with deals with that issue.
Change-Id: I4dc9e0c9a36b4238880520c69f5075eca40f3e66
* changes:
Port os.rename calls to work on Windows
Workaround shutil.rmtree limitation on Windows
Add support for creating symbolic links on Windows
Make "git command" and "forall" work on Windows
$ git ls-files | grep py$ | xargs pyflakes
subcmds/stage.py:101: list comprehension redefines 'p' from line 63
subcmds/sync.py:784: list comprehension redefines 'p' from line 664
subcmds/upload.py:467: list comprehension redefines 'avail' from line 454
Change-Id: Ia65d1a72ed185ab3357e1a91ed4450c719e75a7c
With --force-broken it continue to fetch other projects but nothing
is added in directory because it abort some lines later.
Change-Id: I32c4a4619b3028893dc4f98e8d4e5bc5c09adb27
By default, shutil.rmtree raises an exception when deleting readonly
files on Windows.
Replace all shutil.rmtree with platform_utils.rmtree, which adds an
error handler to make files read-write when they can't be deleted.
Change-Id: I9cfea9a7b3703fb16a82cf69331540c2c179ed53
repo sync can sync submodules via the --fetch-submodules option.
However, if the manifest repo has submodules, those will not be synced.
Having submodules in the manifest repo -- while not commonly done -- can
be useful for inheriting a manifest from another project using <include>
and layering changes on top of it. In this way, you can avoid having to
deal with merge conflicts between your own manifests and the other
project's manifests (for example, if you're managing an Android fork).
Add a --submodule option to init that automatically syncs the submodules
in the manifest repo whenever the manifest repo changes.
Change-Id: I45d34f04517774c1462d7f233f482d1d81a332a8
Signed-off-by: Martin Kelly <mkelly@xevo.com>
repo can be configured to download from any number of remote git repos.
However when one fails repo doesn't report which one. Example:
Fatal: remote error: Daily ls-remote rate limit exceeded for IP xx.xx.xx.xx
TEST=repo init -q -u https://chromium.googlesource.com/chromiumos/manifest.git
# Apply patch in ./.repo/repo/
# Simulate a git remote error:
sed -i -e 's#chromiumos/docs#chromiumos/XXdocs#' .repo/manifests/full.xml
repo sync --quiet --force-sync docs
# error message now shows the remote URL
Optional test tip: reduce the time.sleep(random(...)) in ./.repo/repo/project.py
Change-Id: I4509383b6a43a8e66064778e8ed612d8a735c8b6
When repo syncs a manifest that utilizes multiple branches
in the same project, then the sync will use an extra
thread for each "duplicate". For example, if
the manifest includes the project "foo" and "bar"
twice, then "repo sync -jN" will fetch with N+2 threads.
This is caused by _FetchHelper() releasing the thread semaphore
object each time it's called, even though _FetchProjectList()
may call this function multiple times within the scope of a
single thread.
Fix by moving the thread semaphore release to
_FetchProjectList(), which is only called once per thread
instance.
Change-Id: I1da78b145e09524d40457db5ca5c37d315432bd8
When there's a symlink to a directory, os.walk still lists the symlink
in dirs, even if it isn't configured to follow symlinks. This will fail
the listdirs check if the symlink is broken (either before or during the
cleanup). So instead, check for directory symlinks and remove them using
os.remove.
Bug: Issue 231
Change-Id: I0ec45a26be566613a4a39bf694a3d9c6328481c2
When there are nested projects in a manifest, like on AOSP right now:
<project path="build" name="platform/build" />
<project path="build/blueprint" name="platform/build/blueprint" />
<project path="build/kati" name="platform/build/kati" />
<project path="build/soong" name="platform/build/soong" />
And the top "build" project is removed (or renamed to remove the
nesting), repo just wipes away everything under build/ and re-creates
the projects that are still there. But it only checks to see if the
build/ project is dirty, so if there are dirty files in a nested
project, they'll just be blown away, and a fresh worktree checked out.
Instead, behave similarly to how `git clean -dxf` behaves and preserve
any subdirectories that have git repositories in them. This isn't as
strict as git -- it does not check to see if the '.git' entry is a
readable gitdir, just whether an entry named '.git' exists.
If it encounters any errors removing files, we'll print them all out to
stderr and tell the user that we were unable to clean up the obsolete
project, that they should clean it up manually, then sync again.
Change-Id: I2f6a7dd205a8e0b7590ca5369e9b0ba21d5a6f77
The shared object stores confuse git and make it throw away objects which are
still in use. We'll avoid that problem by disabling automatic pruning on those
projects, but there's nothing preventing a user from changing the config back
or pruning a repository manually.
BUG=chromium:375945
TEST=Ran repo sync on fresh ChromeOS checkout, starting with a branch of repo
with this change. Verified that the kernel projects and no others were
identified as having shared object stores, and that repo successfully disabled
automatic pruning in their configs. Re-enabled pruning and ran repo sync just
on one of the kernel directories. Verified that pruning was re-disabled as a
result.
Change-Id: I728ed5b06f0087aeb5a23ba8f5410a7cd10af5b0
When repo sync is used with -f (--force-error) and a project fails to
sync, the sync will continue but then exit with an error status.
However if -n (--network-only) is also used, the exit code is 0, even
when a project failed.
Modify the logic to make sure the sync exits with the correct status.
Bug: Issue 214
Change-Id: I0b5d97a34642c5aa3743750ef14a42c9d5743c1d
By passing --prune to the sync command, the --prune option is
given to the `git fetch`, causing refs that no longer exist on
the remote to be removed.
Change-Id: I3cedacce14276d96ac2d5aabf2d07fd05e92bc02
The .gitcookies file generated by googlesource.com does not have
the header:
# (Netscape) HTTP Cookie File
which causes python's MozillaCookieJar.load to fail with the
error:
"does not look like a Netscape format cookies file"
Prepend the expected header onto the generated cookie file.
We don't bother to check if the header already exists on the
file; repeating it does not cause any problem.
Bug: Issue 207
Change-Id: I7d39720a1d36a6aae00f70691156514ebc04e579
This way any changes made to the main manifest are reflected in the gitc
manifest. It's also necessary to use both manifests to sync since the
information required to update the gitc manifest is actually in the repo
manifest.
This also fixes a few issues that came up when testing. notdefault
groups weren't being saved to the gitc manifest in a method that matched
'sync'. The merge branch wasn't always being set to the correct value
either.
Change-Id: I435235cb5622a048ffad0059affd32ecf71f1f5b
This way any changes made to the main manifest are reflected in the gitc
manifest. It's also necessary to use both manifests to sync since the
information required to update the gitc manifest is actually in the repo
manifest.
This also fixes a few issues that came up when testing. notdefault
groups weren't being saved to the gitc manifest in a method that matched
'sync'. The merge branch wasn't always being set to the correct value
either.
Change-Id: I5dbc850dd73a9fbd10ab2470ae4c40e46ff894de
Updates the repo launcher and gitc_utils to pull the manifest
directory location out of the gitc config file.
Change-Id: Id08381b8a7d61962093d5cddcb3ff6afbb13004b
Add repo start support for GITC checkouts. If the user is in
the GITC FS view, they can now run repo start to check out
the sources and create a new working branch.
When "repo start" is called on a GITC project, the revision
tag is set to an empty string and saved in a new tag:
old-revision. This tells the GITC filesystem to display the
local copy of the sources when being viewed. The local copy
is created by pulling the project sources and the new branch
is created based off the original project revision.
Updated main.py to setup each command's gitc_manifest when
appropriate.
Updated repo sync's logic to sync opened projects and
updating the GITC manifest file for the rest.
Change-Id: I7e4809d1c4fc43c69b26f2f1bebe45aab0cae628
Don't emit a message when the netrc file doesn't exist or couldn't
be opened.
Instead of trying to unpack the result of info.authenticators() and
catching the resulting TypeError when it's None, first store it to
a local and only unpack it if it has a value.
Also remove an unused import.
Change-Id: I5c404d91e48c261c1ab850c3e5f040c4f4c235cb
