Currently if you run repo download -c on a change and the cherry-pick
runs into a merge conflict a Traceback is produced:
rob@rob-i5-lm ~/Programming/repo_test/repo1 $ repo download -c repo1 3/1
From ssh://rob-i5-lm:29418/repo1
* branch refs/changes/03/3/1 -> FETCH_HEAD
error: could not apply 0c8b474... 2
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add <paths>' or 'git rm <paths>'
hint: and commit the result with 'git commit'
Traceback (most recent call last):
File "/home/rob/Programming/git-repo/main.py", line 408, in <module>
_Main(sys.argv[1:])
File "/home/rob/Programming/git-repo/main.py", line 384, in _Main
result = repo._Run(argv) or 0
File "/home/rob/Programming/git-repo/main.py", line 143, in _Run
result = cmd.Execute(copts, cargs)
File "/home/rob/Programming/git-repo/subcmds/download.py", line 90, in Execute
project._CherryPick(dl.commit)
File "/home/rob/Programming/git-repo/project.py", line 1943, in _CherryPick
raise GitError('%s cherry-pick %s ' % (self.name, rev))
error.GitError: repo1 cherry-pick 0c8b4740f876f8f8372bbaed430f02b6ba8b1898
This amount of error message is confusing to users and has the side effect
of the git message telling you the actual issue being ignored.
This change introduces a message stating that the cherry-pick couldn't
be completed removing the Traceback.
To reproduce the issue create a change that causes a conflict with one currently
in review and use repo download -c to cherry-pick the conflicting change.
Change-Id: I8ddf4e0c8ad9bd04b1af5360313f67cc053f7d6a
Gerrit no longer requires 'p/', and this causes unexpected behavior.
In this change we stop appending 'p/' to the urls.
Change-Id: I72c13bf838f4112086141959fb1af249f9213ce6
This commit implements a Kerberos HTTP authentication handler. It
uses credentials from a local cache to perform an HTTP authentication
negotiation using the GSSAPI.
The purpose of this handler is to allow the use Kerberos authentication
to access review endpoints without the need to transmit the user
password.
Change-Id: Id2c3fc91a58b15a3e83e4bd9ca87203fa3d647c8
Previously, we would remove 'persistent-' then tack it on at the end
if it had been previously found. However, this would ignore urljoin's
decision on whether or not the second path was relative. Instead, we
were always assuming it was relative and that we didn't want to use
a different absolute url with a different protocol.
This change handles persistent-https:// in the same way we handled the
absense of an explicit protocol. The only difference is that this time
instead of temporarily replacing it with 'gopher://', we use 'wais://'.
Change-Id: I6e8ad1eb4b911931a991481717f1ade01315db2a
The repo launcher version needs to be updated so some users can take
advantage of the more robust version number parsing.
Change-Id: Ibcd8036363311528db82db2b252357ffd21eb59b
'repo' and 'git_command.py' had their own git version parsing code.
This change shares that code between the modules. DRY is good.
Change-Id: Ic896d2dc08353644bd4ced57e15a91284d97d54a
This takes the wrapper importing code from main.py and moves it into
its own module so that other modules may import it without causing
circular imports with main.py.
Change-Id: I9402950573933ed6f14ce0bfb600f74f32727705
The last change regarding version parsing lost handling of version
hyphenation, this restores that. In otherwords,
1.1.1-otherstuff is parsed as (1,1,1) instead of (1,1,0)
Change-Id: I3753944e92095606653835ed2bd090b9301c7194
In CL:50715, I updated repo to handle multiple projects, but the
remove-projects code path was not updated accordingly. Update it.
Change-Id: Icd681d45ce857467b584bca0d2fdcbf24ec6e8db
the value of Manifest.projects has changed from being the dictionary
to the values of the dictionary. Here we handle this change
correctly on a PostRepoUpgrade.
From a `git diff v1.12.7 -- manifest_xml.py`:
+ @property
def projects(self):
self._Load()
- return self._projects
+ return self._paths.values()
self._paths does contain the projects according to this line of
manifest_xml.py:
484 self._paths[project.relpath] = project
Change-Id: I141f8d5468ee10dfb08f99ba434004a307fed810
Fetching a new branch on a shallow client may download the entire
project history, as the depth parameter is not passed to git
fetch. Force the fetch to only download the current branch.
Change-Id: Ie17ce8eb5e3487c24d90b2cae8227319dea482c8
This code checks whether a dir exists before creating it. In between the
check and the mkdir call, it is possible that another process will have
created the directory. We have seen this bug occur many times in
practice during our 'repo init' tests.
Change-Id: Ia47d39955739aa38fd303f4e90be7b4c50d9d4ba
The backtrace currently occurs when one uses the "--cbr" argument with
the repo upload subcommand if the current branch is not tracking an
upstream branch. There may be other cases that would backtrace as well,
but this is the only one I found so far.
Change-Id: Ie712fbb0ce3e7fe3b72769fca89cc4c0e3d2fce0
The docs on the annotations say that zero or more may exist as a child
of a project, so that means that a "*" instead of a "?" should be used.
Change-Id: Iff855d003dfb05cd980f285a237332914e1dad70
This significantly reduces sync time and used brandwidth as only
a tar of each project's revision is checked out, but git is not
accessible from projects anymore.
This is relevant when git is not needed in projects but sync
speed/brandwidth may be important like on CI servers when building
several versions from scratch regularly for example.
Archive is not supported over http/https.
Change-Id: I48c3c7de2cd5a1faec33e295fcdafbc7807d0e4d
Signed-off-by: Julien Campergue <julien.campergue@parrot.com>
If the top-level .repo directory is moved somewhere else (e.g. a
different drive) and replaced with a symlink, _InitHooks() will create
broken symlinks. Resolving symlinks before computing the relative path
for the symlink keeps the path within the repo tree, so the tree can
be moved anywhere.
Change-Id: Ifa5c07869e3477186ddd2c255c6c607f547bc1fe
If git-remote-persistent-https fails, we use an iter() and then
subsequently a .read() on stderr. Python doesn't like this and
gives the following error message:
ValueError: Mixing iteration and read methods would lose data
This change removes the use of iter() to avoid the issue.
Change-Id: I980659b83229e2a559c20dcc7b116f8d2476abd5
* Switching from python2 to python3 in the same workspace isn't
currently supported, due to a change in the pickle version (which
isn't supported by python2)
* Basic functionality does work with python3, however not everything
is expected to
Change-Id: I4256b5a9861562d0260b503f972c1569190182aa
* Add .decode('utf-8') where needed
* Add 'b' to `open` where needed, and remove where unnecessary
Change-Id: I0f03ecf9ed1a78e3b2f15f9469deb9aaab698657
git-repo uses 2 space indentation. A couple of recent changes
introduced 4 space indentation in some modules.
Change-Id: Ia4250157c1824c1b5e7d555068c4608f995be9da
It is often useful to be able to include the same project more than
once, but with different branches and placed in different paths in the
workspace. Add this feature.
This CL adds the concept of an object directory. The object directory
stores objects that can be shared amongst several working trees. For
newly synced repositories, we set up the git repo now to share its
objects with an object repo.
Each worktree for a given repo shares objects, but has an independent
set of references and branches. This ensures that repo only has to
update the objects once; however the references for each worktree are
updated separately. Storing the references separately is needed to
ensure that commits to a branch on one worktree will not change the
HEAD commits of the others.
One nice side effect of sharing objects between different worktrees is
that you can easily cherry-pick changes between the two worktrees
without needing to fetch them.
Bug: Issue 141
Change-Id: I5e2f4e1a7abb56f9d3f310fa6fd0c17019330ecd
Currently, an error is raised if more than one default is defined.
When including another manifest, it is likely that a default has
been defined in both manifests.
Don't raise an error if all the defaults defined have the same
attributes.
Change-Id: I2603020687e2ba04c2c62c3268ee375279b34a08
Signed-off-by: Julien Campergue <julien.campergue@parrot.com>
Example:
- `repo init -b master` / sync a project
- In one project: `git checkout -b work origin/branch-thats-not-master`
- make some changes, `git commit`
- `repo upload .`
- Upload will now be skipped with a warning instead of being uploaded to
master
Change-Id: I990b36217b75fe3c8b4d776e7fefa1c7d9ab7282
Passing a project revisionExpr to UploadForReview will cause it to
try to push to refs/for/<sha> if the revision points to a sha
instead of a branch. Pass None for dest_branch if no destination
branch has been specified, which will cause UploadForReview to
upload to the merge branch.
There is room for further improvement, the user prompts will
still print "Upload project <project> to remote branch <sha>",
and then upload to the merge branch and not the sha, but that
is the same behavior that was in 1.12.2.
Change-Id: I06c510336ae67ff7e68b5b69e929693179d15c0b
Previously, change I7150e449341ed8655d398956a095261978d95870
had broken alias support in order to fix the manifest command to keep
it from spitting projects that point to an alias that wasn't recorded.
This commit reverts that commit and instead solves the issue more
correctly, outputting the alias in the remote node of the manifest and
respecting that alias when outputting the list of projects.
Change-Id: I941fc4adb7121d2e61cedc5838e80d3918c977c3
When uploading a change for review, we sometimes request /ssh_info to
get the correct port number for uploading via ssh (regardless of
whether or not we intend to upload over ssh).
If we have trouble accessing /ssh_info (for authentication reasons,
etc), we now press on under the assumption that we will upload via http
instead of aborting.
Change-Id: Ica6bbeac1279e89424a903529649b7f4af0b6937
