Repo will remember a choice and an expiration time of the choice, per
user, about whether to use superproject by default. When not specified
from command line and the choice is not expired, repo would use the
user default value.
When a user default value is not present and when the system wide
enable default is provided in git's system configuration, repo would
ask the user for a confirmation which will be valid for two weeks.
git_config.py: Add support for system config. When reading system
config, we would use --system to avoid hardcoding a path as the
value may be different on some other distributions.
git_superproject.py: Add a new subroutine, _UseSuperproject(), which
returns whether superproject should be used and whether it
is from a user configuration.
The value is determined in the following order:
1. If the user specifies either --use-superproject or
--no-use-superproject, then that choice is being used.
2. If neither is specified, we would then check the saved value
(upon repo init) and use that choice when there was a choice.
3. We then check if there is a saved and unexpired value for
user's choice in their ~/.gitconfig, and use the unexpired
choice, if available.
4. Finally, if all the above didn't give us a decision, and if
the git system configuration is providing a rollout hint, present
a prompt to user for their decision and save it in ~/.gitconfig.
subcmds/sync.py: Make use of the new UseSuperproject() provided by
git_superproject.py.
While there also silent stderr from git describe when determining the
version of repo.
Bug: [google internal] b/190688390
Change-Id: Iad3ee03026342ee500e5d65e2f0fa600d7637613
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/309762
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Xin Li <delphij@google.com>
We changed sync to use multiprocessing for parallel work. This broke
the ssh proxy code as it's all based on threads. Rewrite the logic to
be multiprocessing safe.
Now instead of the module acting as a stateful object, callers have to
instantiate a new ProxyManager class that holds all the state, an pass
that down to any users.
Bug: https://crbug.com/gerrit/12389
Change-Id: I4b1af116f7306b91e825d3c56fb4274c9b033562
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/305486
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
The only time we really need ssh proxies is when we want to run many
connections and reuse them. That only happens when running sync.
Every other command makes at most two connections, and even then it's
only one or none. So the effort of setting up & tearing down ssh
proxies isn't worth it most of the time.
The big reason we want to move this logic to sync is that it's now
using multiprocessing for parallel work. The current ssh proxy code
is all based on threads, which means none of the logic is working
correctly. The current ssh design makes it hard to fix when all of
the state lives in the global/module scope.
So the first step to fixing this is top move the setup & teardown to
the one place that really needs it: sync. No other commands will use
proxies anymore, just direct connections.
Bug: https://crbug.com/gerrit/12389
Change-Id: Ibd351acdec39a87562b3013637c5df4ea34e03c6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/305485
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
We had ssh logic sprinkled between two git modules, and neither was
quite the right home for it. This largely moves the logic as-is to
its new home. We'll leave major refactoring to followup commits.
Bug: https://crbug.com/gerrit/12389
Change-Id: I300a8f7dba74f2bd132232a5eb1e856a8490e0e9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/305483
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The ssh master logic has never worked under Windows which is why this
code always returned False when running there (including cygwin). But
the OS check was still done while holding the threading lock. While
it might be a little slower than necessary, it still worked.
The switch from the threading module to the multiprocessing module
changed global behavior subtly under Windows and broke things: the
globals previously would stay valid, but now they get cleared. So
the lock is reset to None in children workers.
We could tweak the logic to pass the lock through, but there isn't
much point when the rest of the code is still disabled in Windows.
So perform the platform check before we grab the lock. This fixes
the crash, and probably speeds things up a few nanoseconds.
This shouldn't be a problem on Linux systems as the platform fork
will duplicate the existing process memory (including globals).
Bug: https://crbug.com/gerrit/14480
Change-Id: I1d1da82c6d7bd6b8cdc1f03f640a520ecd047063
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/305149
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
A little sugar simplifies the code a bit.
Change-Id: Ie2b8a965faa9f9ca05c7be479d03e8e073cd816d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/296522
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
We're committed to Python 3 at this point, so purge all the
is_python3 related dynamic checks.
Bug: https://crbug.com/gerrit/10418
Change-Id: I4c8b405d6de359b8b83223c9f4b9c8ffa18ea1a2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/292383
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Git config files may have an include tag pointing to another file.
The included file is not parsed unless “git config --list” is
explicitly told to follow includes by adding the argument ”--includes”.
This change add the "--includes" when parsing the global gitconfig file.
Change-Id: I892c9a3a748754c1eb8c9e220578305ca5850dd5
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/264759
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Ulrik Laurén <ulrik.lauren@gmail.com>
This allows people to write ~/.repoconfig/config akin to ~/.gitconfig
and .repo/config akin to .git/config. This allows us to add settings
specific to repo without mixing up git, and to persist in general.
Change-Id: I1c6fbe31e63fb8ce26aa85335349c6ae5b1712c6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255832
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
All the stdlib imports are supposed to come before any local imports.
Change-Id: I10c0335ba2ff715fd34c9eb91bfe6560e904df08
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255593
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Unwrap one unnecessarily wrapped line, and use parentheses on
a wrapped condition instead of wrapping with backslashes.
Change-Id: I12679a0547dd822b15a6551e0f6c308239ff7b2d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254607
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: David Pursehouse <dpursehouse@collab.net>
- E301 expected 1 blank line
- E302 expected 2 blank lines
- E303 too many blank lines
- E305 expected 2 blank lines after class or function definition
- E306 expected 1 blank line before a nested definition
Fixed automatically with autopep8:
git ls-files | grep py$ | xargs autopep8 --in-place \
--select E301,E302,E303,E305,E306
Manually fix issues in project.py caused by misuse of block comments.
Change-Id: Iee840fcaff48aae504ddac9c3e76d2acd484f6a9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254599
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: David Pursehouse <dpursehouse@collab.net>
- E121 continuation line under-indented for hanging indent
- E122 continuation line missing indentation or outdented
- E125 continuation line with same indent as next logical line
- E126 continuation line over-indented for hanging indent
- E127 continuation line over-indented for visual indent
- E128 continuation line under-indented for visual indent
- E129 visually indented line with same indent as next logical line
- E131 continuation line unaligned for hanging indent
Fixed automatically with autopep8:
git ls-files | grep py$ | xargs autopep8 --in-place \
--select E121,E122,E125,E126,E127,E128,E129,E131
Change-Id: Ifd95fb8e6a1a4d6e9de187b5787d64a6326dd249
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254605
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: David Pursehouse <dpursehouse@collab.net>
Make sure we decode the bytes coming from the subprocess.Popen as
we're treating them as strings.
Change-Id: I44100ca5cd94f68a35d489936292eb641006edbe
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/253973
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Use open() as a context manager to simplify the close logic and make
the code easier to read & understand. This is also more Pythonic.
Change-Id: I579d03cca86f99b2c6c6a1f557f6e5704e2515a7
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/244734
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
There is a standard Python "trace" module, so having a local trace.py
prevents us being able to import that. Rename the module to avoid.
Change-Id: I23e29ec95a2204bb168a641323d05e76968d9b57
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/234832
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
When syncing in parallel, this exception is hard to trace back to
a specific repo as the relevant log line could have been pushed
out by other repos syncing code.
Change-Id: I382efeec7651e85622aa51e351134aef0148267f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/233075
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Reviewed-by: Nasser Grainawi <nasser@codeaurora.org>
Tested-by: Mike Frysinger <vapier@google.com>
Python 3 returns bytes by default with urlopen. Adjust our code to
handle that scenario and decode as necessary.
Bug: https://crbug.com/gerrit/10418
Change-Id: Icf4cd80e7ef92d71a3eefbc6113f1ba11c32eebc
There's no reason to support any other encoding in these files.
This only affects the files themselves and not streams they open.
Bug: https://crbug.com/gerrit/10418
Change-Id: I053cb40cd3666ce5c8a0689b9dd938f24ca765bf
* Add more file i/o wrappers in platform_utils to allow using
long paths (length > MAX_PATH) on Windows.
* Paths using the long path syntax ("\\?\" prefix) should never
escape the platform_utils API surface area, so that this
specific syntax is not visible to the rest of the repo code base.
* Forward many calls from os.xxx to platform_utils.xxx in various place
to ensure long paths support, specifically when repo decides to delete
obsolete directories.
* There are more places that need to be converted to support long paths,
this commit is an initial effort to unblock a few common use cases.
* Also, fix remove function to handle directory symlinks
Change-Id: If82ccc408e516e96ff7260be25f8fd2fe3f9571a
pylint is not used since bb5b1a0. The pyflakes cleanup mentioned in that
commit has not been done, but given that this project is no longer being
actively developed I don't think it's worth spending time doing it.
Leaving the pylint suppressions causes confusion because it leads people
to think that we are still using pylint.
Change-Id: If7d9f280a0f408c780f15915ffdb80579ae21f69
os.remove raises an exception when deleting read-only files on
Windows. Replace all calls with calls to platform_utils.remove,
which deals with deals with that issue.
Change-Id: I4dc9e0c9a36b4238880520c69f5075eca40f3e66
When starting a branch, branch.merge is set to project revision unless
the revision is a SHA1. In that case, branch.merge is set to dest_branch
if defined or manifest default revision otherwise. This special handling
allows repo upload to work when the project revision is a SHA1.
Extend the special handling to also happen when the project revision
is a tag value or a change value so that repo upload will work in those
case as well.
Change-Id: Iff81ece40e770cd02535e80dcb023564d42dcf47
This option allow to bypass verification ssl certification while
establishing connection with Gerrit to upload review.
Change-Id: If2e15f5a273c18a700eb5093ca8a4d5a4cbf80cd
This is required for setups, where Gerrit access using ssh is only available
for some networks.
For network without ssh access, repo will get ssh_info from Gerrit and
use ssh for communications - which will fail. To support this setup
we need to have an option to ignore the ssh_info provided by Gerrit and
use http(s).
Using git insteadOf as alternative results in the inability to add
reviewers using "repo upload --re=...", since the syntax of adding
reviewers differs for ssh and https. repo is assuming an ssh
connection and uses "git push --receive-pack=...", which will fail
since git silently uses https for push operation. repo must be aware
that https is used so it uses "git push remote ...:refs/for/...%r=..."
for upload.
Change-Id: Idd83baef0fb26ffcc9ac65e204b68d323ce177a1
Allow the 'remote' element in the manifest file to define an optional
'pushurl' attribute which is passed into the .git/config file.
Change-Id: If342d299d371374aedc4440645798888869c9714
Signed-off-by: Steve Rae <steve.rae@raedomain.com>
if a gerrit server has ssh and https access enabled, but user access
(for some users) is limited to https, 'repo upload' command will fail
for them.
Gerrit returns a ssh configuration (gerrit/ssh_info), that does not work
for users limited to https.
With this patch repo will test, if the returned ssh configuration from
gerrit/ssh_info is working. if not, it will fall back to https for upload.
Change-Id: If98f472e994f350bf71f35610cd649b163f1ab33
this check can only detect errors that happen within 1 sec after launching
ssh. But this is typically enough to catch configuration issues like
'connection refused' or 'authentication failed'.
Change-Id: I00b6f62d4c2889b1faa6c820e49a198554c92795
Use the same cookies and proxy that git traffic goes through for
persistent-http[s] to support authentication for smart-sync.
Change-Id: I20f4a281c259053a5a4fdbc48b1bca48e781c692
As a fix for issue #149, this patch add support for the remote '.'
(local).
As an alias for the local repository, remote '.' is lacking a fetch =
config in .git/config.
Without such refspec, repo info --overview is not able to process a
local tracking branch.
v2: Check for name == '.' before checking if merge starts with refs/,
since the case where it's not is invalid.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Change-Id: I8c8fd8602cd68baecb530301ae41d37d751ec85d
While not typical, some users might have an upstream that isn't in
the usual refs/heads/* namespace. There's no reason not to use
those refs as the value for the upstream attribute, so support
doing so.
Change-Id: I5b119f1135c3268c20e7c4084682e860d3ee1fb1
Use JSON as it is shown to be much faster than pickle.
Also clean up the loading and saving functions.
Change-Id: I45b3dee7b4d59a1c0e0d38d4a83b543ac5839390
For complex .gitconfig url rewrites, multiple insteadOf lines may be
used for a url. Search all of them for the right rewrite.
Change-Id: If5e9ecd054e86226924b0baf513801cd57c389cd
