Create RepoProject and ManifestProject, inheriting from MetaProject,
with methods separated for isolation and clarity.
Change-Id: Ic1d6efc65c99470290fea612e2abaf8670d199f4
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/334139
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
To be addressed in another change:
- a partial `repo sync` (with a list of projects/paths to sync)
requires `--this-tree-only`.
Change-Id: I6c7400bf001540e9d7694fa70934f8f204cb5f57
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/322657
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
If submodules is False, explicitly pass '=no'. Uninitialized submodules
may cause the default option to fail.
Change-Id: Ia00bcba5b69c4b65195f4c469c686a3ef9a4a3ad
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/330159
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
This is just a log file that, while useful for humans when gc aborts,
doesn't contain any data, so it's safe to throw away.
Bug: https://crbug.com/gerrit/15619
Change-Id: Ia95e0e281f52260668f7a80b5d5f990e32a8597a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/328999
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
It was reported that git-lfs did not work with git-repo. Specifically,
`git read-tree -u` run by `repo sync` would fail git-lfs's smudge
filter. See https://github.com/github/git-lfs/issues/1422.
In fact, by the time `git read-tree -u` is run, the repository is not
bare. It is just that, the working directory is not the same as the
.git directory. git-lfs's filter should work. No one seems to have
delved into that issue.
Today, with newer versions of git-repo and git-lfs, that issue will
not reproduce. Tested with
- git 2.33, git-lfs 2.13 on macOS
- git 2.17, git-lfs 2.3 on ubuntu
So, it seems fine to add an option --enable-git-lfs-filter, default to
false, and stat that it may not work with older versions of git and
git-lfs in the help doc.
Bug: https://crbug.com/gerrit/14516
Change-Id: I8d21854eeeea541e072f63d6b10ad1253b1a9826
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/328359
Tested-by: XD Trol <milestonejxd@gmail.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Removing the sample hooks is just clean up, so if repo cannot remove a
sample hook that should not cause it to fail.
Change-Id: I716b977da091c22b8f53e134f4fbc114116f9a65
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/328635
Reviewed-by: Mike Frysinger <vapier@google.com>
In order to stop sharing objects/ directly between shared projects,
we have to fetch the remote objects into project-objects/ manually.
So instead of running git operations in the individual project dirs
and relying on .git/objects being symlinked to project-objects/,
tell git to store any objects it fetches in project-objects/.
We do this by leveraging the GIT_OBJECT_DIRECTORY override. This
has been in git forever, or at least since v1.7.2 which is what we
already hard require. This tells git to save new objects to the
specified path no matter where it's being run otherwise.
We still otherwise run git in the project-specific dir so that it
can find the right set of refs that it wants to compare against,
including local refs. For that reason, we also have to leverage
GIT_ALTERNATE_OBJECT_DIRECTORIES to tell git where to find objects
that are not in the upstream remote. This way git doesn't blow up
when it can't find objects only associated with local commits.
As it stands right now, the practical result is the same: since we
symlink the project objects/ dir to the project-objects/ tree, the
default objects dir, the one we set $GIT_OBJECT_DIRECTORY to, and
the one we set $GIT_ALTERNATE_OBJECT_DIRECTORIES to are actually
all the same. So this commit by itself should be safe. But in a
follow up commit, we can replace the symlink with a separate dir
and git will keep working.
Bug: https://crbug.com/gerrit/15553
Change-Id: Ie4e654aec3e1ee307eee925a54908a2db6a5869f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/328100
Reviewed-by: Jack Neus <jackneus@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When using --reference, the path is written to objects/info/alternates.
The path is accessed inconsistently -- sometimes through projects/ (via
self.gitdir) and sometimes through project-objects/ (via self.objdir).
This works because projects/.../objects is a symlink to the objects dir
under project-objects/. Change all accesses to go through self.objdir.
This will allow us to stop symlinking projects/.../objects without the
reference dir logic breaking. The projects/ path is going to use its
alternates file for its own needs.
Bug: https://crbug.com/gerrit/15553
Change-Id: I6b452ad1aaffec74ecb7ac1bb9baa3a3a52e076c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/328099
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jack Neus <jackneus@google.com>
These hooks are never used and often get stale, so just trim them.
Users rarely look in these dirs to begin with.
Change-Id: Ic785aa55fb7ec84a61376df101127d0018882030
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/327538
Reviewed-by: Jack Neus <jackneus@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Since we don't do this anymore, and there prob won't be a need to
bring it back, drop support for it.
Bug: https://crbug.com/gerrit/15460
Change-Id: I7d86706f108c797a5c7962cb1578693d49430367
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/327537
Reviewed-by: Jack Neus <jackneus@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Verify all the .git/ paths will be handled by the migration logic before
starting the migration. This way we still abort & log an error, but the
user gets to see it before we put the tree into a state that they have to
manually recover. Also add a few more known-safe-to-clobber paths.
Bug: https://crbug.com/gerrit/15273
Change-Id: If49d69b341bc960ddcafa30da333fb5ec7145b51
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/327557
Reviewed-by: Colin Cross <ccross@android.com>
Tested-by: Mike Frysinger <vapier@google.com>
Unsharing this directory shouldn't be a problem. The current repo code
treated it as a file, and while that's actually incorrect, files & dirs
are basically treated the same, so it's practically the same.
Let's enumerate each subpath since there aren't that many.
info/refs:
Only used when the project is exported over git dumb transports (i.e.
a http:// server). Repo never does this, and it's extremely unlikely
any user has ever done this. Plus, this proposal talks about unsharing
project refs, so this file should get unshared too.
info/grafts:
A user-configurable file that repo never touches. Might be useful to
share across projects, but probably rarely (if ever) used by developers,
and forcing them to configure it for each project isn't that big of a
deal.
info/exclude:
info/attributes:
User-configurable files that repo never touches. Doesn't seem like
most users ever touch these, and if they do, having them do it for
each shared project isn't a big deal.
info/sparse-checkout:
Repo doesn't use sparse checkouts, and it's extremely unlikely to even
work if a user tried doing something themselves.
Bug: https://crbug.com/gerrit/15460
Change-Id: I53e44d73a6d7a92da615b46600d8ea51cb46e3ac
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/327519
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Nothing uses this path. It’s only for exporting git dirs e.g. for
online gitweb use which probably no one does. It is not the same
description file as exists on servers we cloned from. Leaving it
as the default plain text file will simplify code.
We don't undo any existing symlinks if they exist since repo does
not care about them, and their existence doesn't hurt.
Bug: https://crbug.com/gerrit/15460
Change-Id: Ic34fe7c3cfb8f6da844de5be30158f59382b1cc8
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/327518
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
This path only matters to users of `git svn` who manually run it in
local projects after they get a full repo client checkout. With svn
usage falling in general, and with the fact that the source checkout
now symlinks its .git/ state to the internal projects/ path, we don't
need to manage this anymore.
It means the path won't be shared among multiple local projects that
have the same remote, but so it goes. It was an optimization only,
not functionality required for correctness. We want to simplify the
internals to stop messing with git state, and this particular path
doesn't seem worth the effort to maintain.
We don't undo any existing svn symlinks if they exist since repo does
not care about them, and their existence doesn't hurt anything.
Bug: https://crbug.com/gerrit/15460
Change-Id: Ie8496b275bcc589771aa9f4ee874ed2ee6d5241d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/327517
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Now that we symlink worktree .git/ paths to .repo/projects/, we never
set share_refs=True anywhere, which means all of this logic is dead
code. Throw it all away. Do it as a separate commit to make the
parent commit easier to review.
Bug: https://crbug.com/gerrit/15273
Change-Id: If496d39029d3d3bd523ba24c603ce47a63ad9b51
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/326817
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jack Neus <jackneus@google.com>
Historically we created a .git/ subdir in each source checkout and
symlinked individual files to the .repo/projects/ paths. This layer
of indirection isn't actually needed: the .repo/projects/ paths are
guaranteed to only ever have a 1-to-1 mapping with the actual git
checkout. So we don't need to worry about having files in .git/ be
isolated.
To that end, change how we manage the actual project checkouts from
a dir full of symlinks (and a few files) to a symlink to the internal
.repo/projects/ dir. This makes the code simpler & faster.
The directory structure we have today is:
.repo/
project-objects/chromiumos/third_party/kernel.git/
<paths omitted as not relevant to this change>
projects/src/third_party/kernel/
v3.8.git/
config
description -> …/project-objects/…/config
FETCH_HEAD
HEAD
hooks/ -> …/project-objects/…/hooks/
info/ -> …/project-objects/…/info/
logs/
objects/ -> …/project-objects/…/objects/
packed-refs
refs/
rr-cache/ -> …/project-objects/…/rr-cache/
src/third_party/kernel/
v3.8/
.git/
config -> …/projects/…/v3.8.git/config
description -> …/project-objects/…/v3.8.git/description
HEAD
hooks/ -> …/project-objects/…/v3.8.git/hooks/
index
info/ -> …/project-objects/…/v3.8.git/info/
logs/ -> …/projects/…/v3.8.git/logs/
objects/ -> …/project-objects/…/v3.8.git/objects/
packed-refs -> …/projects/…/v3.8.git/packed-refs
refs/ -> …/projects/…/v3.8.git/refs/
rr-cache/ -> …/project-objects/…/v3.8.git/rr-cache/
The directory structure we have after this commit:
.repo/
<nothing changes>
src/third_party/kernel/
v3.8/
.git -> …/projects/…/v3.8.git
Bug: https://crbug.com/gerrit/15273
Change-Id: I9dd8def23fbfb2f4cb209a93f8b1b2b24002a444
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/323695
Reviewed-by: Mike Nichols <mikenichols@google.com>
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
repo sync only handles a git tag properly when it is in the "revision"
field. However, "revision locked manifests" (`repo manifest
--revision-as-HEAD`) specifies the tag in the "upstream" field. The
issue is that this tag is not fetched. Only the commit that the tag
points to is fetched. This cases issues as
self._CheckForImmutableRevision() runs and comes to the conclusion that
the tag was changed while in fact, it was just not fetched. This causes
a full sync.
File docs/manifest-format.md, section Element-project:
> Attribute upstream: Name of the Git ref in which a sha1 can be found.
Used when syncing a revision locked manifest in -c mode to avoid having
to sync the entire ref space. Project elements not setting their own
upstream will inherit this value.
Change-Id: I0507d3a5f30aee8920a9f820bafedb48dd5db554
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/323620
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Robin Schneider <ypid@riseup.net>
objdir is the .repo/project-objects/ dir based on the remote path.
gitdir is the .repo/projects/ dir based on the local source checkout
path. When we setup the gitdir, we symlink "hooks" to the one in the
objdir. But when we go to initialize the hooks, we do it via gitdir.
There is a 1-to-many mapping from project-objects to projects, so
initializing via gitdir can be repetitive. Collapse the hook init
logic to the objdir init path.
Change-Id: I828fca60ce6e125d6706c709cdb2797faa40aa50
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/323815
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When a hard revision ID is provided in a regular project tag then the
revisionId is updated as well if it is a commit hash. The difference
is that if the revisionExpr is a commit, git-repo needs to update
refs/remotes/m/master with update-ref not symbolic-ref, as the latter
must refer to another ref, not to a specific commit.
Change-Id: I215a62dabb30225e480ad2c731416d775fc0c750
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/310963
Tested-by: Michael Kelly <mkelly@arista.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
This allows us to move the repository to a new location in the source
tree without having to remove-project + add a new project tag.
Change-Id: I4dba6151842e57f6f2b8fe60cda260ecea68b7b4
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/310962
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Michael Kelly <mkelly@arista.com>
Some of the file removal calls are subject to race conditions (if
something else deletes the file), so extend our remove API to have
an option to ignore ENOENT errors. Then update a bunch of random
call sites to use this new functionality.
Change-Id: I31a9090e135452033135337a202a4fc2dbf8b63c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/319195
Reviewed-by: Sean McAllister <smcallis@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
For older git-repo versions, we might have only fetched the SHA1
revision that was provided by the project, but have remote branch left
intact as long as they exist. When the remote branch become stale,
some repo operations like rebase would fail, and repo sync would not
correct this situation.
Fix this by tightening the requirement to also require the superproject
provided SHA1 be an ancestor or equal to the tip-of-tree of the remote
branch.
Bug: [google internal] b/193798453
Change-Id: Ie34c5d860dabb1cbd9f822da929088ec69c79cf6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/312642
Tested-by: Xin Li <delphij@google.com>
Reviewed-by: Raman Tenneti <rtenneti@google.com>
It is possible that a clone bundle contained the object referenced by
the branch in the manifest and in the superproject, but not the branch
itself (for example, the branch may be newly created from an existing
branch, or is not vislble to the user downloading the clone bundle).
When --use-superproject is enabled, because we are overriding
revisionExpr with the SHA1 revision provided by the superproject, the
verification step would succeed, but because the expected branch do not
exist, it would confuse git-repo at a later time, as it is expecting the
remote branch to exist in the local clone.
In project.py, fix this by making SetRevisionId() to always remember
the actual branch name and verify it in _CheckForImmutableRevision()
so that we only skip the fetch step when both objects exists locally.
Bug: [google internal] b/191974277
Change-Id: I49d3ca0667f524c8c45f416492faf95b1dd822fb
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/310802
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Xin Li <delphij@google.com>
We always pass in output_redir when syncing, but that's the common case:
there are a few situations (like `repo init`) where we don't pass in a
buffer, and if any errors show up in that case, we'd crash. Rely on the
print function to handle this logic for us.
Bug: https://crbug.com/gerrit/14568
Change-Id: I8cd47e82329797ffc42534418a3dfbd8429205be
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/307222
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
We changed sync to use multiprocessing for parallel work. This broke
the ssh proxy code as it's all based on threads. Rewrite the logic to
be multiprocessing safe.
Now instead of the module acting as a stateful object, callers have to
instantiate a new ProxyManager class that holds all the state, an pass
that down to any users.
Bug: https://crbug.com/gerrit/12389
Change-Id: I4b1af116f7306b91e825d3c56fb4274c9b033562
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/305486
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
The only time we really need ssh proxies is when we want to run many
connections and reuse them. That only happens when running sync.
Every other command makes at most two connections, and even then it's
only one or none. So the effort of setting up & tearing down ssh
proxies isn't worth it most of the time.
The big reason we want to move this logic to sync is that it's now
using multiprocessing for parallel work. The current ssh proxy code
is all based on threads, which means none of the logic is working
correctly. The current ssh design makes it hard to fix when all of
the state lives in the global/module scope.
So the first step to fixing this is top move the setup & teardown to
the one place that really needs it: sync. No other commands will use
proxies anymore, just direct connections.
Bug: https://crbug.com/gerrit/12389
Change-Id: Ibd351acdec39a87562b3013637c5df4ea34e03c6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/305485
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When converting this logic from print() to the output buffer, this
error codepath should have dropped the use of the file= redirect.
Bug: https://crbug.com/gerrit/14482
Change-Id: Ib484924a2031ba3295c1c1a5b9a2d816b9912279
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/305142
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
While this provides a way to undo earlier command line options (e.g.
`repo sync --tags --no-tags`) which can be helpful for scripting &
automation, this more importantly allows the user to override the
manifest settings for syncing tags from a project.
Bug: https://crbug.com/gerrit/12401
Change-Id: Id4c36cd82e6ca7cb073b5d63a09f6c7ccdebba83
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/304904
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
For most commands, this is more about providing a way to undo earlier
command line options (e.g. `repo info -c --no-current-branch`) which
can be helpful for scripting & automation. But for the sync command,
this is helpful to undo the setting that exists in the manifest itself.
With this in place, tweak the sync current_branch_only logic to only
apply the manifest settings when the user hasn't specified a command
line option.
Bug: https://crbug.com/gerrit/12401
Change-Id: I21e2384624680cc740d1b5d1e49c50589d2fe6a0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/304903
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
We were updating the per-checkout m/ pseudo ref when syncing, but we
only created the common m/ redirect when initializing a project for
the first time. This is fine unless the user switches the manifest
branch in an existing project, then we never create that redirect.
Bug: https://crbug.com/gerrit/14468
Change-Id: I5325e7e602dcb4ce150bef258901ba5e9fdea461
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/304822
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When depth is used, we would fetch only SHA1 when superproject is
used, as the result, only the manifest branch is being recorded,
and commands like repo start would fail.
Fix this by saving the upstream branch value in the overlay
manifest and add the upstream branch to fetch list.
Bug: [google internal] b/185951360
Change-Id: Ib36f56067723f2572ed817785b31cc928ddfec0a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/304562
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Xin Li <delphij@google.com>
Default the partial_clone_exclude argument to an empty set.
Fixes the following report by Emil Medve.
With this change (up to v2.14.1), on an existing "normal" clone (without partial-clone options) I'm seeing this traceback during `repo selfupdate`:
Traceback (most recent call last):
File ".../.repo/repo/main.py", line 630, in <module>
_Main(sys.argv[1:])
File ".../.repo/repo/main.py", line 604, in _Main
result = run()
File ".../.repo/repo/main.py", line 597, in <lambda>
run = lambda: repo._Run(name, gopts, argv) or 0
File ".../.repo/repo/main.py", line 261, in _Run
result = cmd.Execute(copts, cargs)
File ".../.repo/repo/subcmds/selfupdate.py", line 54, in Execute
if not rp.Sync_NetworkHalf():
File ".../.repo/repo/project.py", line 1091, in Sync_NetworkHalf
if self.name in partial_clone_exclude:
TypeError: argument of type 'NoneType' is not iterable
$ ./run_tests -v
Change-Id: I71e744e4ef2a37b13aa9ba42eba3935e78c4e40a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/304082
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
Make sure we print a message whenever we retry so it's clear to the
user why repo is pausing for a long time, and why repo might have
passed even though it displayed some errors earlier.
Also unify the sleep logic so we don't have two independent methods.
This makes it easier to reason about.
Also don't sleep if we're in the last iteration of the for loop. It
doesn't make sense to and needlessly slows things down when there are
real errors.
Bug: https://crbug.com/gerrit/12494
Change-Id: Ifceace5b2dde75c2dac39ea5388527dd37376336
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/303402
Reviewed-by: Sam Saccone 🐐 <samccone@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
partial-clone-exclude option excludes projects during
partial clone. This is a comma-delimited project names
(from manifest.xml). This option is persisted and it
is used by the sync command.
A project that has been unparital'ed will remain unpartial if
that project's name is specified in the --partial-clone-exclude
option. The project name should match exactly.
Added
$ ./run_tests -v
Bug: [google internal] b/175712967
"I can't "unpartial" my androidx-main checkout"
$ rm -rf androidx-main/
$ mkdir androidx-main/
$ cd androidx-main/
$ repo_dev init -u https://android.googlesource.com/platform/manifest -b androidx-main --partial-clone --clone-filter=blob:limit=10M -m default.xml
$ repo_dev sync -c -j8
+ Verify a project is partial
$ cd frameworks/support/
$ git config -l | grep 'partial'
+ Unpartial a project.
$ /google/bin/releases/android/git_repack/git_unpartial
+ Verify project is unpartial
$ git config -l | grep 'partial'
$ cd ../..
+ Exclude the project from being unparial'ed after init and sync.
$ repo_dev init -u https://android.googlesource.com/platform/manifest -b androidx-main --partial-clone --clone-filter=blob:limit=10M --partial-clone-exclude="platform/frameworks/support,platform/frameworks/support-golden" -m default.xml
+ Verify project is unpartial
$ cd frameworks/support/
$ git config -l | grep 'partial'
$ cd ../..
$ repo_dev sync -c -j8
$ cd frameworks/support/
$ git config -l | grep 'partial'
$ cd ../..
+ Remove the project from exclude list and verify that project is partially cloned.
$ repo_dev init -u https://android.googlesource.com/platform/manifest -b androidx-main --partial-clone --clone-filter=blob:limit=10M --partial-clone-exclude= -m default.xml
$ repo_dev sync -c -j8
$ cd frameworks/support/
$ git config -l | grep 'partial'
Change-Id: Id5dba418eba1d3f54b54e826000406534c0ec196
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/303162
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Raman Tenneti <rtenneti@google.com>
Re-allow checking out projects to the top of the repo client checkout.
We add checks to prevent checking out files under .repo/ as that path
is only managed by us, and projects cannot inject content or settings
into it.
Bug: https://crbug.com/gerrit/14156
Bug: https://crbug.com/gerrit/14200
Change-Id: Id6bf9e882f5be748442b2c35bbeaee3549410b25
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/299623
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
If the current project doesn't have any local branches, then there's
nothing to prune, so return right away. This avoids running a few
git commands when we aren't actually going to use the results, and
it avoids checking repository validity. Since we aren't going to do
anything in here, no need to check it.
Change-Id: Ie9d5c75a954e42807477299f3e5a63a92fac138b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/299742
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The recent commit 84230009ee ("project:
make diff tools synchronous") broke repo diff if it includes % formats.
Add an explicit format string to fix.
Bug: https://crbug.com/gerrit/14208
Change-Id: Ie255a43c5b767488616b2b3dd15abc18f93bfab2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/299402
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The clone bundle logic assumes there is a one-to-one mapping between the
projects/ and project-objects/ trees. When using shared projects (where
we checkout different branches from the same project), this would lead us
to fetching the same clone bundle multiple times. Automatically skip the
clone bundle logic if the project-objects/ dir already exists.
Bug: https://crbug.com/gerrit/10993
Change-Id: I82c6fa1faf8605fd56c104fcea2a43dd4eecbce4
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/298682
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The default sync output should show a progress bar only for successful
commands, and the error output for any commands that fail. Implement
that policy here.
Bug: https://crbug.com/gerrit/11293
Change-Id: I85716032201b6e2b45df876b07dd79cb2c1447a5
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297905
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When sync moved to consume clone output, it merged stdout & stderr,
but the retry logic in this function is based on stderr only. Move
it over to checking stdout.
Change-Id: I71bdc18ed25c978055952721e3a768289d7a3bd2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297902
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Use multiprocessing to run diff in parallel.
Change-Id: I61e973d9c2cde039d5eebe8d0fe8bb63171ef447
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297483
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Python 3 has a simpler super() style so switch to it to make the
code a little simpler and to stop pylint warnings.
Change-Id: I1b3ccf57ae968d56a9a0bcfc1258fbd8bfa3afee
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297383
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
These are the only users in the tree that process the output as it's
produced. All others capture all the output first and then process
the results. However, these functions still don't fully return until
it's finished processing, and these funcs are in turn used in other
synchronous code paths. So it's unclear whether anyone will notice
that it's slightly slower or less interactive. Let's try it out and
see if users report issues.
This will allow us to simplify our custom GitCommand code and move it
over to Python's subprocess.run, and will help fix interleaved output
when running multiple commands in parallel (e.g. `repo diff -j8`).
Change-Id: Ida16fafc47119d30a629a8783babeba890515de0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/297144
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
A little sugar simplifies the code a bit.
Change-Id: Ie2b8a965faa9f9ca05c7be479d03e8e073cd816d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/296522
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
_CheckForImmutableRevision is used to see if repo can
skip fetching a project, but 'git rev-parse' with partial
clone does a data fetch to accomplish this.
Changed to use: 'git rev-list -1 --missing=allow-any <SHA>^0' which
checks the local ref without fetching from the server first.
Bug: [google internal] b/179477822
Testing:
- Unit tests
- Verified init/sync working on aosp-master
- Verified wwith a pinned manifest that local ref check works (no fetch)
Change-Id: If327b893c6658421f41df1f58c337f53b4c60ce6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/296142
Reviewed-by: Dan Willemsen <dwillemsen@google.com>
Tested-by: Ian Kasprzak <iankaz@google.com>
Added "--use-superporject" option to sync.py to fetch project SHAs from
superproject. If there are any missing projects in superprojects, it
prints the missing entries and exits. If there are no missing entries,
it will use SHAs from superproject to fetch the projects from git.
Tested the code with the following commands.
$ ./run_tests tests/test_manifest_xml.py
$ ./run_tests -v tests/test_git_superproject.py
$ ./run_tests -v
Tested the sync code by copying all the repo changes into my Android
AOSP checkout and adding <superporject> tag to default.xml. With
local modification to the code to print the status,
.../WORKING_DIRECTORY$ repo sync --use-superproject
repo: executing 'git clone' url: sso://android/platform/superproject
repo: executing 'git ls-tree'
Success: []
Bug: https://crbug.com/gerrit/13709
Tested-by: Raman Tenneti <rtenneti@google.com>
Change-Id: Id18665992428dd684c04b0e0b3a52f46316873a0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/293822
Reviewed-by: Mike Frysinger <vapier@google.com>
We're committed to Python 3 at this point, so purge all the
is_python3 related dynamic checks.
Bug: https://crbug.com/gerrit/10418
Change-Id: I4c8b405d6de359b8b83223c9f4b9c8ffa18ea1a2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/292383
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When checkout is done with Git worktrees then the HEAD in the
bare-git repositories point to the initialized default (e.g.
'refs/heads/master'). This default branch does not exist
locally and is not automatically created.
When a user now creates a branch in any git repository named
'master' then it is no longer possible to get rid of this branch,
neither is it possible to switch to another branch and switch
back to this master branch. Git concludes the 'master' branch is
already checked out (in the bare Git) and that results in a
lockdown of this master branch.
To repoduce this issue, run these commands in a repo tree
checked out with --worktree:
- git checkout master # assuming the remote repo has a master branch,
# a local tracking branch master is created here
- git checkout -b temp
- git checkout master # This one now fails
- git branch -d master # fails too
The failure is caused by Git assuming the master branch is checked out
by the bare git repository since HEAD is pointing towards it.
To workaround this, we always detach HEAD in the bare-git when
syncing. We don't need it to point to a ref in general, but we
would like it to be valid so git tools "just work" if they're run
in here.
Signed-off-by: Remy Bohmer <oss@bohmer.net>
Change-Id: I15c96604363c41f0d01c42f533174393097daeb5
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/290985
Reviewed-by: Mike Frysinger <vapier@google.com>
When intializing a new repo with the --reference option on Windows 10
the objects/info/alternates in each git repository is created with
Windows line endings (\r\n), leading to the following error:
error: object directory C:/<PATH_TO_MIRROR>/<REPO_NAME>.git/objects?
does not exist; check .git/objects/info/alternates
This can be fixed by simply using unix line endings on both
Windows and unix platforms.
Reported-by: Francisco Javier Alvarez Garcia <javier.alvarez.garcia.17@gmail.com>
Follow-up-from: I268fe029ede68802c21037b0f2ae8a95afb85e48
Bug: https://crbug.com/gerrit/13208
Change-Id: I6da60c4ca957778b3c42ab6b9ad85c40483f0042
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/289431
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Remy Bohmer <oss@bohmer.net>
Worktree .git and gitdir reference files are written by Git with
Unix line ending, even on Windows & macOS. The conversion to
relative paths makes these files end with DOS line endings in
Windows. The Git integration in Visual Studio 2019 cannot deal
with these DOS line endings and considers these worktrees invalid.
Signed-off-by: Remy Bohmer <github@bohmer.net>
Change-Id: I088cfd994f3cc31db4e0ca7791fa0a4ee3ac222f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/289310
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Remy Bohmer <linux@bohmer.net>
We conflate the manifest & parsing logic with the management of the
repo client checkout in a single class. This makes testing just one
part (the manifest parsing) hard as it requires a full checkout too.
Start splitting the two apart into separate classes to make it easy
to reason about & test.
Change-Id: Iaf897c93db9c724baba6044bfe7a589c024523b2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/288682
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The project.py file is huge and contains multiple
classes. By moving it to seperate class files the code
becomes more readable and maintainable.
Signed-off-by: Remy Bohmer <github@bohmer.net>
Change-Id: Ida9d99d31751d627ae1ea0373418080696d2e14b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/281293
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Remy Bohmer <linux@bohmer.net>
Instead of hardcoding "master" as our default, use the remote server's
default branch instead. For most people, this should be the same as
"master" already. For projects moving to "main", it means we'll use
the new name automatically rather than forcing people to use -b main.
For repositories that never set up a default HEAD, we should still use
the historical "master" default.
Bug: https://crbug.com/gerrit/13339
Change-Id: I4117c81a760c9495f98dbb1111a3e6c127f45eba
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/280799
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
This change increases the speed of the command with parallelization with
processes. The parallelization with threads doesn't work well, and
increasing the number of jobs to many (8 threads ~) didn't increase the speed.
Possibly, the global interpreter lock of Python affects.
Bug: https://crbug.com/gerrit/12389
Change-Id: Icbe5df8ba037dd91422b96f4e43708068d7be924
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/279936
Tested-by: Kimiyuki Onaka <kimiyuki@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
worktreeconfig extension only appears with version Git 2.20.0
Change-Id: I3ea8b7d9f8a1f7953e536edd77b09cbc4f8f3158
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/276700
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Adrien Bioteau <adrien.bioteau@gmail.com>
The intention of the check is to verify whether the target
file name contains a wild card. The code, however, assumes
that if the file is non-existent - it contains a wild card.
This has the side effect that a target file that does not
exist at the moment of the check is considered to contain a
wild card, this leads itself to softlink not being created.
Change-Id: I4e4cd7b5e1b8ce2e4b2edc9abf5a1147cd86242f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/265736
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Angel Petkov <apetkov86@gmail.com>
Add retries with exponential backoff and jitter to the fetch
operations. By default don't change behavior and enable
behind the new flag '--fetch-retries'.
Bug: https://crbug.com/1061473
Change-Id: I492710843985d00f81cbe3402dc56f2d21a45b35
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/261576
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: George Engelbrecht <engeg@google.com>
This is a pretty common option for people to want too use, so include
it as a pass-thru option when cherry-picking.
Bug: https://crbug.com/gerrit/9418
Change-Id: I2a24c1ed7544541719caa4d3c0574347a151a1b0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/259853
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
The git cherry-pick already supports this, so plumb the existing repo
option down. Otherwise it's confusing when people use -c --ff and it
doesn't use that behavior.
Change-Id: Id68932ffa09204bb30b92a21aff185c00394a520
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/259852
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
When we download git sources, we get a progress bar (good) and we get
a dump of all the refs we downloaded (bad) as it can easily be 100+ if
not 1000+ depending on the project (for each git repo!). Lets rework
the output behavior so that:
* quiet: Only errors.
* default: Progress bars (if on a tty).
* verbose: Full output (progress bars & downloaded refs).
Bug: https://crbug.com/gerrit/11293
Change-Id: I87a380075e79de6805f91095876dd1b37d32873a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256456
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Since most ref namespaces are shared among all worktrees, trying to
set the pseudo m/<branch> in the common git repo ends up clobbering
each other when using shared checkouts. For example, in CrOS:
<project path="src/third_party/kernel/v3.8"
name="chromiumos/third_party/kernel"
revision="refs/heads/chromeos-3.8" />
<project path="src/third_party/kernel/v3.10"
name="chromiumos/third_party/kernel"
revision="refs/heads/chromeos-3.10" />
Trying to set m/master in chromiumos/third_party/kernel.git/ will
keep clobbering the other.
Instead, when using git worktrees, lets set the m/ pseudo ref to
point into the refs/worktree/ namespace which is unique to each
git worktree. So we have in the common dir:
chromiumos/third_party/kernel.git/:
refs/remotes/m/master:
ref: refs/worktree/m/master
And then in each worktree we point refs/worktree/m/master to the
respective manifest revision expression. Now people can use the
m/master in each git worktree and have it resolve to the right
commit for that worktree.
Bug: https://crbug.com/gerrit/12404
Change-Id: I78814bdd5dd67bb13218c4c6ccd64f8a15dd0a52
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256952
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Draft CLs were replaced by private/wip CLs in Gerrit instead years ago.
Change-Id: If4f3d6606aad40a6f1617a49681dfd45c64d3d37
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256673
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Add a helper to our git wrapper to find the .git subdir,
and then use that to detect internal rebase state.
Change-Id: I3b3b6ed4c1f45cc8c3c98dc19c7ca3aabdc46905
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256532
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Git likes to create .git files with read-only permissions which makes
it difficult to open+truncate+write in situ under Windows. Delete it
before we write the file content to workaround.
Change-Id: I3effd96525f0dfe0b90e298b6bf0b856ea26aa03
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256412
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Windows requires Administrator access to create symlinks. We can
mitigate this a bit by falling back to hardlinks as those may be
created by any user on the system. Do this with the git hooks as
these are supposed to be internal only and people shouldn't be
modifying them. If they do, they'll have to delink first. This
seems worth it to allow repo usage without extra privileges.
Change-Id: I996ea9c9238f7bd7d27d1d9b1f2786593bf75ef7
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256312
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
We also need to check more things in the manifest/project handlers,
and use platform_utils in a few places to address Windows behavior.
Drop Python 2.7 from Windows testing as it definitely doesn't work
and we won't be fixing it.
Change-Id: I83d00ee9f1612312bb3f7147cb9535fc61268245
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256113
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
We're using this for git worktrees because it handles the .git file
format, but it should work for all flows. Unify to simplify. This
also fixes the worktree logic which duplicated .git/config settings.
Change-Id: Ie3af2e206710859dccfc376b3593f415d6830738
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256034
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
Since deleting a source checkout involves a good bit of internal
knowledge of .repo/, move the DeleteProject helper out of the sync
code and into the Project class itself. This allows us to add git
worktree support to it so we can unlock/unlink project checkouts.
Change-Id: If9af8bd4a9c7e29743827d8166bc3db81547ca50
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256072
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When using extensions, make sure we set the git repo format version
so git knows to check the extension compatibility. We can add a
helper to the Project API to simplify this and make it foolproof.
Change-Id: I9ab6c32d92fe2b8e5df6e2b080ca71556332e909
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256035
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
This provides initial support for using git worktrees internally
instead of our own ad-hoc symlink tree. It's been lightly tested
which is why it's not currently exposed via --help.
When people opt-in to worktrees in an existing repo client checkout,
no projects are migrated. Instead, only new projects will use the
worktree method. This allows for limited testing/opting in without
having to completely blow things away or get a second checkout.
Bug: https://crbug.com/gerrit/11486
Change-Id: Ic3ff891b30940a6ba497b406b2a387e0a8517ed8
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254075
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
This allows users to specify custom hashtags when uploading, both via
the CLI and via the same gitconfig settings as other upload options.
Bug: https://crbug.com/gerrit/11174
Change-Id: Ia0959e25b463e5f29d704e4d06e0de793d4fc77c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255855
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
If we're not in --verbose mode with repo sync, then omit the
per-project clone bundle progress bar.
Bug: https://crbug.com/gerrit/11293
Change-Id: Ibdf3be86d35fcbccbf6788c192189f38c577e6e9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255854
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Trying to use booleans with names like "no_xxx" are hard to follow due
to the double negatives. Invert all of them so we only have positive
meanings to follow.
Change-Id: Ifd37d0368f97034d94aa2cf38db52c723ac0c6ed
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255493
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Syncing projects works fine the majority of the time. So rather than
dump all of that noisy output to stdout, lets capture it and only show
when things fail or in verbose mode. This tidies up the default `repo
sync` output.
Bug: https://crbug.com/gerrit/11293
Change-Id: I8314dd92e1e6aadeb26e36a8c92610da419684e6
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255413
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
This allows us to control sync output better by having three levels
of output: quiet (only errors), default (progress bars), verbose (all
the things). For now, we just put the chatty "already have persistent
ref" message behind the verbose level.
Bug: https://crbug.com/gerrit/11293
Change-Id: Ia61333fd8085719f3e99edb7b466cdb04031b67f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255414
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Our sync output is pretty chatty, and the stat output on fast forward
merges doesn't really help. Suppress it to tighten up the output.
Change-Id: I91e50639b3cd8db9df3d13a7da6d1aaa70d7932f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255412
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
All of the instances of this are related to Python 2 names that
don't exist in Python 3, and the warnings are raised when running
flake8 on Python 3.
All of these will go away once we completely remove support for
Python 2, so just suppress them inline. We don't globally suppress
the check so that we will still see legitimate errors if/when they
occur in new code.
Change-Id: Iccf955f50abfc9f83b371fc0af6cceb51037456f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255039
Tested-by: David Pursehouse <dpursehouse@collab.net>
Reviewed-by: Mike Frysinger <vapier@google.com>
We've been requiring git-1.7.2 since Oct 2012, so we can safely drop
the individual checks sprinkled throughout the code base for older.
Change-Id: I1737fff7b3f27f475960b0bff9cb300aefd5d108
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/253135
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
flake8 reports:
E722 do not use bare 'except'
Replace them with 'except Exception' per [1] which says:
Bare except will catch exceptions you almost certainly don't want
to catch, including KeyboardInterrupt (the user hitting Ctrl+C) and
Python-raised errors like SystemExit
If you don't have a specific exception you're expecting, at least
except Exception, which is the base type for all "Regular" exceptions.
[1] https://stackoverflow.com/a/54948581
Change-Id: Ic555ea9482645899f5b04040ddb6b24eadbf9062
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254606
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: David Pursehouse <dpursehouse@collab.net>
- E301 expected 1 blank line
- E302 expected 2 blank lines
- E303 too many blank lines
- E305 expected 2 blank lines after class or function definition
- E306 expected 1 blank line before a nested definition
Fixed automatically with autopep8:
git ls-files | grep py$ | xargs autopep8 --in-place \
--select E301,E302,E303,E305,E306
Manually fix issues in project.py caused by misuse of block comments.
Change-Id: Iee840fcaff48aae504ddac9c3e76d2acd484f6a9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254599
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: David Pursehouse <dpursehouse@collab.net>
- E121 continuation line under-indented for hanging indent
- E122 continuation line missing indentation or outdented
- E125 continuation line with same indent as next logical line
- E126 continuation line over-indented for hanging indent
- E127 continuation line over-indented for visual indent
- E128 continuation line under-indented for visual indent
- E129 visually indented line with same indent as next logical line
- E131 continuation line unaligned for hanging indent
Fixed automatically with autopep8:
git ls-files | grep py$ | xargs autopep8 --in-place \
--select E121,E122,E125,E126,E127,E128,E129,E131
Change-Id: Ifd95fb8e6a1a4d6e9de187b5787d64a6326dd249
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254605
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: David Pursehouse <dpursehouse@collab.net>
We have a few files that we optionally symlink from the work tree
.git/ to the .repo/projects/ path. If they don't exist when we
first initialize, then we skip creating symlinks. If the files
are created later on under the work tree .git/, repo gets upset.
This can happen with the packed-refs file: if we don't have any
packed refs initially, we don't symlink it. But if git tries to
pack refs later on and creates the file, the project gets wedged.
We could create an empty file initially and then symlink it, but
for some files, it's not clear we want to always do that (e.g.
the .git/shallow setting). Instead, lets make handling of these
paths more dynamic. If they show up later on in the work tree
.git/ only, we'll take care of relocating & symlinking. This
also makes repo a little more robust and autorecovers incase a
path goes missing in one of the dirs.
Ideally we wouldn't monkey around at all here, but considering
the only option we give to users currently is to blow things
away with --force-sync, this seems a bit better.
Bug: https://crbug.com/gerrit/12324
Change-Id: Ia6960f1896ac6d890c762d7d053684a1c6ab2c87
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254632
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
This reverts commit 4abf8e6ef8.
The curl process for updating the cookie file is not atomic. When
fetching many bundles in parallel, we can sometimes corrupt the file
causing it to be cleared. Since users should manage gitcookies on
their own, leave it read-only.
Bug: https://crbug.com/gerrit/12300
Change-Id: Id472c99b197bc4cf8533c649f8881509f38643c1
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254092
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Since tempfile.mkstemp() returns a file handle in binary mode,
make sure we turn our strings into bytes before writing.
Bug: https://crbug.com/gerrit/12043
Change-Id: I3e84d595e84b8bc12a1fbc7fd0bb3ea0ba2832b0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254393
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Some Android/Nest manifests are using <linkfile> with src="." to
create stable paths to specific projects. Allow that specific
use case as it seems reasonable to support.
Bug: https://crbug.com/gerrit/11218
Change-Id: I16dbe8d9fe42ea45440afcb61404c753bff1930d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254330
Reviewed-by: Chanho Park <parkch98@gmail.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Add a helper function to unify the duplication of finding the full
path to the symbolic HEAD ref. This makes it easy to handle git
worktrees where .git is a file rather than a dir/symlink.
Bug: https://crbug.com/gerrit/11486
Change-Id: I9f794f1295ad0d98c7c13622f01ded51e4ba7846
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254074
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
These files are not directly executable, so drop the +x bits.
Change-Id: Iaf19a03a497686cc21103e7ddf08073173440dd1
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254076
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
* Mirrors may contain multiple projects, some of which may not
always contain the default revision.
* Only fetch the default revision explicitly if
'--current-branch' is set.
* Fixes breakage casued by
commit 6856f98467
"Fix repo mirror with --current-branch"
Bug: https://crbug.com/gerrit/12274
Change-Id: Iaafabe2992f76f3644b841f24245d3e19c9515a9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/253093
Reviewed-by: Kuang-che Wu <kcwu@chromium.org>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Chirayu Desai <chirayudesai1@gmail.com>
