When trying to render manifest with SHAs, projects in group notdefault
caused the following crash:
Traceback (most recent call last):
File ".repo/repo/main.py", line 385, in <module>
_Main(sys.argv[1:])
File ".repo/repo/main.py", line 365, in _Main
result = repo._Run(argv) or 0
File ".repo/repo/main.py", line 137, in _Run
result = cmd.Execute(copts, cargs)
File ".repo/repo/subcmds/manifest.py", line 129, in Execute
self._Output(opt, manifest)
File ".repo/repo/subcmds/manifest.py", line 79, in _Output
peg_rev = opt.peg_rev)
File ".repo/repo/manifest_xml.py", line 199, in Save
p.work_git.rev_parse(HEAD + '^0'))
File ".repo/repo/project.py", line 2035, in runner
capture_stderr = True)
File ".repo/repo/git_command.py", line 215, in __init__
raise GitError('%s: %s' % (command[1], e))
error.GitError: rev-parse: [Errno 2] No such file or directory: 'prebuilts/eclipse-build-deps'
This patch resolves the issue by making sure that -notdefault is always
used as a default manifest group so that notdefault projects are not
rendered out by the manifest subcmd.
Change-Id: I4a8bd18ea7600309f39ceff1b1ab6e1ff3adf21d
Signed-off-by: Matt Gumbel <matthew.k.gumbel@intel.com>
(Previous submission of this change broke Android buildbot due to
incorrect regular expression for parsing git-config output. During
investigation, we also found that Android, which pulls Chromium, has a
workaround for Chromium's submodules; its manifest includes Chromium's
submodules. This new change, in addition to fixing the regex, also
take this type of workarounds into consideration; it adds a new
attribute that makes repo not fetch submodules unless submodules have a
project element defined in the manifest, or this attribute is
overridden by a parent project element or by the default element.)
We need a representation of git-submodule in repo; otherwise repo will
not sync submodules, and leave workspace in a broken state. Of course
this will not be a problem if all projects are owned by the owner of the
manifest file, who may simply choose not to use git-submodule in all
projects. However, this is not possible in practice because manifest
file owner is unlikely to own all upstream projects.
As git submodules are simply git repositories, it is natural to treat
them as plain repo projects that live inside a repo project. That is,
we could use recursively declared projects to denote the is-submodule
relation of git repositories.
The behavior of repo remains the same to projects that do not have a
sub-project within. As for parent projects, repo fetches them and their
sub-projects as normal projects, and then checks out subprojects at the
commit specified in parent's commit object. The sub-project is fetched
at a path relative to parent project's working directory; so the path
specified in manifest file should match that of .gitmodules file.
If a submodule is not registered in repo manifest, repo will derive its
properties from itself and its parent project, which might not always be
correct. In such cases, the subproject is called a derived subproject.
To a user, a sub-project is merely a git-submodule; so all tips of
working with a git-submodule apply here, too. For example, you should
not run `repo sync` in a parent repository if its submodule is dirty.
Change-Id: I4b8344c1b9ccad2f58ad304573133e5d52e1faef
If a local manifest includes a 'remove-project' element that refers to
a project that does not exist in the manifest, the error message is a
bit cryptic.
Change the error message to make it clearer what is wrong.
Change-Id: I0b1043aaec87893c3128211d3a9ab2db6d600755
The repo coding style is to indent at 2 characters, but there are
many places where this is not followed.
Enable pylint warning "W0311: Bad indentation" and make sure all
indentation is at multiples of 2 characters.
Change-Id: I68f0f64470789ce2429ab11104d15d380a63e6a8
Local manifest files stored in the local_manifests folder are loaded
in alphabetical order, so it's easier to know in which order project
removals/additions/modifications will be applied.
If local_manifests.xml exists, it will be loaded before the files in
local_manifests.
Change-Id: Ia5c0349608f1823b4662cd6b340b99915bd973d5
In the current implementation, an error is raised if a remote with the
same name is defined more than once. The check is only that the remote
has the same name as an existing remote.
With the support for multiple local manifests, it is more likely than
before that the same remote is defined in more than one manifest.
Change the check so that it only raises an error if a remote is defined
more than once with the same name, but different attributes.
Change-Id: Ic3608646cf9f40aa2bea7015d3ecd099c5f5f835
The preferred way to specify local manifests is to drop the file(s)
in the local_manifests folder. Print a deprecation warning when
the legacy local_manifest.xml file is used.
Change-Id: Ice85bd06fb612d6fcceeaa0755efd130556c4464
Add support for multiple local manifests stored in the local_manifests
folder under the .repo home directory.
Local manifests will be processed in addition to local_manifest.xml.
Change-Id: Ia0569cea7e9ae0fe3208a8ffef5d9679e14db03b
Catch ExpatError and exit gracefully with an error message, rather
than exiting with a python traceback.
Change-Id: Ifd0a7762aab4e8de63dab8a66117170a05586866
Fixing some more pylint warnings:
W1401: Anomalous backslash in string
W0623: Redefining name 'name' from outer scope
W0702: No exception type(s) specified
E0102: name: function already defined line n
Change-Id: I5afcdb4771ce210390a79981937806e30900a93c
"except Exception as e" instead of "except Exception, e"
This is part of a transition to supporting Python 3. Python >= 2.6
support "as" syntax.
Note: this removes Python 2.5 support.
Change-Id: I309599f3981bba2b46111c43102bee38ff132803
pylint configuration file (.pylintrc) is added, and submission
instructions are updated to include pylint usage steps.
Deprecated pylint suppression (`disable-msg`) is updated in a few
modules to make it work properly with the latest version (0.26).
Change-Id: I4ec2ef318e23557a374ecdbf40fe12645766830c
We need a representation of git-submodule in repo; otherwise repo will
not sync submodules, and leave workspace in a broken state. Of course
this will not be a problem if all projects are owned by the owner of the
manifest file, who may simply choose not to use git-submodule in all
projects. However, this is not possible in practice because manifest
file owner is unlikely to own all upstream projects.
As git submodules are simply git repositories, it is natural to treat
them as plain repo projects that live inside a repo project. That is,
we could use recursively declared projects to denote the is-submodule
relation of git repositories.
The behavior of repo remains the same to projects that do not have a
sub-project within. As for parent projects, repo fetches them and their
sub-projects as normal projects, and then checks out subprojects at the
commit specified in parent's commit object. The sub-project is fetched
at a path relative to parent project's working directory; so the path
specified in manifest file should match that of .gitmodules file.
If a submodule is not registered in repo manifest, repo will derive its
properties from itself and its parent project, which might not always be
correct. In such cases, the subproject is called a derived subproject.
To a user, a sub-project is merely a git-submodule; so all tips of
working with a git-submodule apply here, too. For example, you should
not run `repo sync` in a parent repository if its submodule is dirty.
Change-Id: I541e9e2ac1a70304272dbe09724572aa1004eb5c
Fixing more issues found with pylint. Some that were supposed to
have been fixed in the previous sweep (Ie0db839e) but were missed:
C0321: More than one statement on a single line
W0622: Redefining built-in 'name'
And some more:
W0631: Using possibly undefined loop variable 'name'
W0223: Method 'name' is abstract in class 'name' but is not overridden
W0231: __init__ method from base class 'name' is not called
Change-Id: Ie119183708609d6279e973057a385fde864230c3
Fix the following issues reported by pylint:
C0321: More than one statement on a single line
W0622: Redefining built-in 'name'
W0612: Unused variable 'name'
W0613: Unused argument 'name'
W0102: Dangerous default value 'value' as argument
W0105: String statement has no effect
Also fixed a few cases of inconsistent indentation.
Change-Id: Ie0db839e7c57d576cff12d8c055fe87030d00744
Currently when doing a sync against a revision locked manifest,
sync has no option but to fall back to sync'ing the entire refs space;
it doesn't know which ref to ask for that contains the sha1 it wants.
This sucks if we're in -c mode; thus when we generate a revision
locked manifest, record the originating branch- and try syncing that
branch first. If the sha1 is found within that branch, this saves
us having to pull down the rest of the repo- a potentially heavy
saving.
If that branch doesn't have the desired sha1, we fallback to sync'ing
everything.
Change-Id: I99a5e44fa1d792dfcada76956a2363187df94cf1
Change Details:
* Switch first default group to 'all' instead of 'default'
Change Benefits:
* More consistent with default_groups in the counterpart Save() function
* Fixes bug where command 'repo manifest' added an extra 'default'
group to every output project element groups attribute. This bug was
particularly confusing for projects which had 'groups="notdefault"'
as they were output as 'groups="notdefault,default"' by 'repo manifest'
Change-Id: I5611c027a982d3394899466248b971910bec8c6b
manifest_xml: import `HEAD` and `R_HEADS` from correct module
version: import `HEAD` from correct module
`HEAD` and `R_HEADS` should be imported from the git_refs module,
where they are originally defined, rather than from the project
module.
repo: remove unused import of readline
cherry_pick: import standard modules on separate lines
smartsync: import subcmd modules explicitly from subcmd
Use:
`import re
import sys`
and
`from subcmds.sync import Sync`
Instead of:
`import sys, re`
and
`from sync import Sync`
Change-Id: Ie10dd6832710939634c4f5c86b9ba5a9cd6fc92e
If the first line of manifest.xml is a XML comment, root.childNodes[0]
is not a 'manifest' element node. The python minidom module will makes
a 'Comment' node as root.childNodes[0]. Since the original code only
checks whether the first child node is 'manifest', it couldn't do any
command including 'sync' due to the 'ManifestParseError' exception. This
patch could allow the comments between '<?xml ...?>' and '<manifest>' in
the manifest.xml file.
Change-Id: I0b81dea4f806965eca90f704c8aa7df49c579402
Instead of every group being in the group "default", every project
is now in the group "all". A group that should not be downloaded
by default may be added to the group "notdefault".
This allows all group names to be positive (instead of removing groups
directly in the manifest with -default) and offers a clear way of
selecting every project (--groups all).
Change-Id: I99cd70309adb1f8460db3bbc6eff46bdcd22256f
One of the recent changes introduced implicit path:xxx and name:xxx groups
to every project, however they are not being stripped when generating
a manifest using "repo manifest" command resulting in clutter
Change-Id: Iec8610ba794b2fe4a6cdf0f59ca561595b66f9b5
The `alias` is an optional attribute in element `remote`. It can be
used to override attibute `name` to be set as the remote name in each
project's .git/config. Its value can be duplicated while attribute
`name` has to be unique across the manifest file. This helps each
project to be able to have same remote name which actually points
to different remote url.
It eases some automation scripts to be able to checkout/push to same
remote name but actually different remote url, like:
repo forall -c "git checkout -b work same_remote/work"
repo forall -c "git push same_remote work:work"
for example:
The manifest with 'alias' will look like:
<?xml version='1.0' encoding='UTF-8'?>
<manifest>
<remote alias="same_alias" fetch="git://git.external1.org/" name="ext1"
review="http://review.external1.org"/>
<remote alias="same_alias" fetch="git://git.external2.org/" name="ext2"
review="http://review.external2.org"/>
<remote alias="same_alias" fetch="ssh://git.internal.com:29418" name="int"
review="http://review.internal.com"/>
<default remote="int" revision="int-branch" sync-j="2"/>
<project name="path/to/project1" path="project1" remote="ext1"/>
<project name="path/to/project2" path="project2" remote="ext2"/>
<project name="path/to/project3" path="project3"/>
...
</manifest>
In each project, use command "git remote -v"
project1:
same_alias git://git.external1.org/project1 (fetch)
same_alias git://git.external1.org/project1 (push)
project2:
same_alias git://git.external2.org/project2 (fetch)
same_alias git://git.external2.org/project2 (push)
project3:
same_alias ssh://git.internal.com:29418/project3 (fetch)
same_alias ssh://git.internal.com:29418/project3 (push)
Change-Id: I2c48263097ff107f0c978f3e83966ae71d06cb90
For CrOS, we have scenarios were people checkout a smaller version
of our manifest via groups, and enable individual repositories as
needed for their work. Previously this was via local_manifest
manipulation, which breaks via manifest-groups would require a
remove-project tag.
Via injecting the projects name into the projects groups, this
allows us to instead manipulate the configured groups allowing
the user to turn on/off projects as necessary.
Change-Id: I07b7918e16cc9dc28eb47e19a46a04dc4fd0be74
Calculation of where the include file lives was broken by 23acdd3f14
since it resulted in looking for the first include in .repo, rather
than .repo/manifests.
While people can work around it via setting their includes to
manifests/<include-target>, that breaks down since each layer of
includes would then have to be relative.
As such, restore the behaviour back to 2644874d; manifests includes
are calculated relative to the manifest root (ie, .repo/manifests);
local manifests includes are calculated relative to .repo/ .
Change-Id: I74c19ba614c41d2f08cd3e9fd094f3c510e3bfd1
Combine manifest and local_manifest into a single list of elements
before parsing. This will allow elements in the local_manifest to
affect elements in the main manifest.
Change-Id: I4d34c9260b299a76be2960b07c0c3fe1af35f33c
Having the ability to include other manifests is a very practical feature
to ease the managment of manifest. It allows to divide a manifest into separate
files, and create different environment depending on what we want to release
You can have unlimited recursion of include, the manifest configs will simply be concatenated
as if it was in a single file.
command "repo manifest" will create a single manifest, and not recreate the manifest hierarchy
for example:
Our developement manifest will look like:
<?xml version='1.0' encoding='UTF-8'?>
<manifest>
<default revision="platform/android/main" remote="intel"/>
<include name="server.xml"/> <!-- The Server configuration -->
<include name="aosp.xml" /> <!-- All the AOSP projects -->
<include name="bsp.xml" /> <!-- The BSP projects that we release in source form -->
<include name="bsp-priv.xml" /> <!-- The source of the BSP projects we release in binary form -->
</manifest>
Our release manifest will look like:
<?xml version='1.0' encoding='UTF-8'?>
<manifest>
<default revision="platform/android/release-ext" remote="intel"/>
<include name="server.xml"/> <!-- The Server configuration -->
<include name="aosp.xml" /> <!-- All the AOSP projects -->
<include name="bsp.xml" /> <!-- The BSP projects that we release in source form -->
<include name="bsp-ext.xml" /> <!-- The PREBUILT version of the BSP projects we release in binary form -->
</manifest>
And it is also easy to create and maintain feature branch with a manifest that looks like:
<?xml version='1.0' encoding='UTF-8'?>
<manifest>
<default revision="feature_branch_foobar" remote="intel"/>
<include name="server.xml"/> <!-- The Server configuration -->
<include name="aosp.xml" /> <!-- All the AOSP projects -->
<include name="bsp.xml" /> <!-- The BSP projects that we release in source form -->
<include name="bsp-priv.xml" /> <!-- The source of the BSP projects we release in binary form -->
</manifest>
Signed-off-by: Brian Harring <brian.harring@intel.com>
Signed-off-by: Pierre Tardy <pierre.tardy@intel.com>
Change-Id: I833a30d303039e485888768e6b81561b7665e89d
There are use-cases when fetching all branch is impractical and
we really need to fetch only one branch/tag.
e.g. there is a large project with binaries and every update of a
binary file is put to a separate branch.
The whole project history might be too large to allow users fetch it.
Add 'sync-c' option to 'project' and 'default' tags to make it possible
to configure 'sync-c' behavior at per-project and per-manifest level.
Note that currently there is no possibility to revert boolean flag from
command line. If 'sync-c' is set in manifest then you cannot make
full fetch by providing a repo tool argument.
Change-Id: Ie36fe5737304930493740370239403986590f593
Previous incarnations of groups support left "groups=" in the
repo .config, which is now treated as "delete all the projects".
Treat empty groups configuration the same as no groups
configuration.
Change-Id: I57dab8dac55bdbf4cc181e2748cd2e4e510764f5
Every project is in group "default". "-default" does not remove
it from this project. All group names specified in the manifest
are positive names as opposed to a mix of negative and positive.
Specified groups are resolved in order. If init is supplied with
--groups="group1,-group2", the following describes the project
selection when syncing:
* all projects in "group1" will be added, and
* all projects in "group2" will be removed.
Change-Id: I1df3dcdb64bbd4cd80d675f9b2d3becbf721f661
Allow the optional addition of "annotation" nodes nested under
projects. Each annotation node must have "name" and "value"
attributes. These name/value pairs will be exported into the
environment during any forall command, prefixed with "REPO__"
In addition, an optional "keep" attribute with case insensitive "true"
or "false" values can be included to determine whether the annotation
will be exported with 'repo manifest'
Change-Id: Icd7540afaae02c958f769ce3d25661aa721a9de8
Signed-off-by: James W. Mills <jameswmills@gmail.com>
Allows specifying a list of groups with a -g argument to repo init.
The groups act on a group= attribute specified on projects in the
manifest.
All projects are implicitly labelled with "default" unless they are
explicitly labelled "-default".
Prefixing a group with "-" removes matching projects from the list
of projects to sync.
If any non-inverted manifest groups are specified, the default label
is ignored.
Change-Id: I3a0dd7a93a8a1756205de1d03eee8c00906af0e5
Reviewed-on: https://gerrit-review.googlesource.com/34570
Reviewed-by: Shawn Pearce <sop@google.com>
Tested-by: Shawn Pearce <sop@google.com>
This new attribute can prevent 'repo sync' from automatically rebasing.
I hit a situation in where one of the git repositories I was tracking
was actually an external repository that I wanted to pull commits
into and merge myself. (NOT rebase, since that would lose the merge
history.) In this case, I'm not using 'repo upload', I'm manually
managing the merges to and from this repository.
Everything was going great until I typed 'repo sync' and it rebased
my manually-merged tree. Hence the option to skip it.
Change-Id: I965e0dd1acb87f4a56752ebedc7e2de1c502dbf8
This reverts commit ee1c2f5717.
This breaks a lot of buildbot systems. Rolling it back for now
until we can understand what the breakage was and how to fix it.
A default manifest URL can be specified using:
git config --global repo-manifest.<id>.url <url>
A default manifest server can be specified using:
git config --global repo-manifest.<id>.server <url>
A default git mirror reference can be specified using:
git config --global repo-manifest.<id>.reference <path>
This will allow the user to use 'repo init -u <id>' as
a shorter alternative to specifying the full URL.
Also, manifest server will not have to be specified in the
manifest XML and the reference will not have to be specified
on the command line. If they are, they will override these
default values however.
Change-Id: Ifdbc160bd5909ec7df9efb0c5d7136f1d9351754
Signed-off-by: Victor Boivie <victor.boivie@sonyericsson.com>
A bug introduced by relative urls caused projects such as manifest.git
to be placed in the root directory instead of the directory they should
by in.
This fix creates and refers to a resolvedFetchUrl in the _XmlRemote
class in order to get a fetchUrl that is never relative.
This permits manifest authors to suggest a number of parallel
fetch operations against a remote server. For example, Gerrit
Code Review servers support queuing of requests and processes
them in first-in, first-out order. Running concurrent fetches
can utilize multiple CPUs on the Gerrit server, but will also
decrease overall operation latency by having the request put
into the queue ready to execute as soon as a CPU is free.
Change-Id: I3d3904acb6f63516bae4b071c510ad57a2afab18
Signed-off-by: Shawn O. Pearce <sop@google.com>
All repo-level hooks are expected to live in a single project at the
top level of that project. The name of the hooks project is provided
in the manifest.xml. The manifest also lists which hooks are enabled
to make it obvious if a file somehow failed to sync down (or got
deleted).
Before running any hook, we will prompt the user to make sure that it
is OK. A user can deny running the hook, allow once, or allow
"forever" (until hooks change). This tries to keep with the git
spirit of not automatically running anything on the user's computer
that got synced down. Note that individual repo commands can add
always options to avoid these prompts as they see fit (see below for
the 'upload' options).
When hooks are run, they are loaded into the current interpreter (the
one running repo) and their main() function is run. This mechanism is
used (instead of using subprocess) to make it easier to expand to a
richer hook interface in the future. During loading, the
interpreter's sys.path is updated to contain the directory containing
the hooks so that hooks can be split into multiple files.
The upload command has two options that control hook behavior:
- no-verify=False, verify=False (DEFAULT):
If stdout is a tty, can prompt about running upload hooks if needed.
If user denies running hooks, the upload is cancelled. If stdout is
not a tty and we would need to prompt about upload hooks, upload is
cancelled.
- no-verify=False, verify=True:
Always run upload hooks with no prompt.
- no-verify=True, verify=False:
Never run upload hooks, but upload anyway (AKA bypass hooks).
- no-verify=True, verify=True:
Invalid
Sample bit of manifest.xml code for enabling hooks (assumes you have a
project named 'hooks' where hooks are stored):
<repo-hooks in-project="hooks" enabled-list="pre-upload" />
Sample main() function in pre-upload.py in hooks directory:
def main(project_list, **kwargs):
print ('These projects will be uploaded: %s' %
', '.join(project_list))
print ('I am being a good boy and ignoring anything in kwargs\n'
'that I don\'t understand.')
print 'I fail 50% of the time. How flaky.'
if random.random() <= .5:
raise Exception('Pre-upload hook failed. Have a nice day.')
Change-Id: I5cefa2cd5865c72589263cf8e2f152a43c122f70
This feature is used to convey information on a when a branch has
ceased development or if it is an experimental branch with a few
gotchas, etc.
You add it to your manifest XML by doing something like this:
<manifest>
<notice>
NOTE TO DEVELOPERS:
If you checkin code, you have to pinky-swear that it contains no bugs.
Anyone who breaks their promise will have tomatoes thrown at them in the
team meeting. Be sure to bring an extra set of clothes.
</notice>
<remote ... />
...
</manifest>
Carriage returns and indentation are relevant for the text in this tag.
This feature was requested by Anush Elangovan on the ChromiumOS team.
This option allows the user to specify a manifest server to use when
syncing. This manifest server will provide a manifest pegging each
project to a known green build. This allows developers to work on a
known good tree that is known to build and pass tests, preventing
failed builds to hamper productivity.
The manifest used is not "sticky" so as to allow subsequent
'repo sync' calls to sync to the tip of the tree.
Change-Id: Id0a24ece20f5a88034ad364b416a1dd2e394226d
If the manifest repository is on a detached HEAD and we are parsing
an XML formatted manifest we should simply set the branch property
to None, rather than crash with an AttributeError.
Signed-off-by: Shawn O. Pearce <sop@google.com>
The revisionExpr field now holds an expression from the manifest,
such as "refs/heads/master", while revisionId holds the current
commit-ish SHA-1 of the revisionExpr. Currently that is only
filled in if the manifest points directly to a SHA-1.
Signed-off-by: Shawn O. Pearce <sop@google.com>
We now feed Project a RemoteSpec, instead of the Remote directly
from the XmlManifest. This way the RemoteSpec already has the
full project URL, rather than just the base, permitting other
types of manifests to produce the URL in their own style.
Signed-off-by: Shawn O. Pearce <sop@google.com>
We'll soon be supporting two different manifest formats, but we
can't immediately remove support for the current XML one that is
in wide spread use within Android.
Signed-off-by: Shawn O. Pearce <sop@google.com>
