After some refactoring earlier, the forall command was
broken briefly, returning after only one run instead
of after all projects.
This test, albeit simple in nature, would have caught that.
Due to the somewhat demanding nature of forall,
a lot more setup was needed than expected but seems
to do its job now so hopefully it catches similar stuff
in the future.
Change-Id: I51e161ff0e7e31a65401211c376f319bda504532
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/445461
Tested-by: Fredrik de Groot <fredrik.de.groot@haleytek.com>
Reviewed-by: Josip Sokcevic <sokcevic@google.com>
Commit-Queue: Fredrik de Groot <fredrik.de.groot@haleytek.com>
command should be cmd_name, to match what git is emitting. This also
fixes arguments, so that only relevant arguments are passed instead
of the entire sys.args, which will contain wrapper information
Change-Id: Id436accfff511292ec2c56798fffb2306dda38fc
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/443741
Commit-Queue: Josip Sokcevic <sokcevic@google.com>
Reviewed-by: Gavin Mak <gavinmak@google.com>
Tested-by: Josip Sokcevic <sokcevic@google.com>
This adds an optional, built-in checker for
guarding against patches hanging on wrong
base revisions, which is useful if a lower layer of
the manifest changes after a patch was done.
When adding a patch with a new revision using
extend-project or remove-project/project:
C---D---E patches in project bla
/
A---B project bla in manifest state 1
<extend-project name="bla" revision="E" base-rev="B">
If project bla gets updated, in a new snap ID
or by a supplier or similar, to a new state:
C---D---E patches in project bla
/
A---B---F---G project bla in manifest state 2
Parsing will fail because revision of bla is now G,
giving the choice to create a new patch branch
from G and updating base-rev, or keeping previous
branch for some reason and only updating base-rev.
Intended for use in a layered manifest with
hashed revisions. Named refs like branches and tags
also work fine when comparing, but will be misleading
if a branch is used as base-rev.
Change-Id: Ic6211550a7d3cc9656057f6a2087c505b40cad2b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/436777
Reviewed-by: Josip Sokcevic <sokcevic@google.com>
Tested-by: Fredrik de Groot <fredrik.de.groot@haleytek.com>
Commit-Queue: Josip Sokcevic <sokcevic@google.com>
With 551285fa35, the comment about number
of workers no longer stands - dict is shared among multiprocesses and
real time information is available.
Using 2.7k projects as the baseline, using chunk size of 4 takes close
to 5 minutes. A chunk size of 32 takes this down to 40s - a reduction of
rougly 8 times which matches the increase.
R=gavinmak@google.com
Bug: b/371638995
Change-Id: Ida5fd8f7abc44b3b82c02aa0f7f7ae01dff5eb07
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/438523
Commit-Queue: Josip Sokcevic <sokcevic@google.com>
Tested-by: Josip Sokcevic <sokcevic@google.com>
Reviewed-by: Gavin Mak <gavinmak@google.com>
In method _parse the value of this variable 'have_fg ' is always
False, Maybe reassign it to True is lost.
I guess the author’s original intention was:
if set some value in gitconfig file(for ex: text = black red ul),
the first is bg color, the second is fg color, and the last one is attr.
Change-Id: I372698fe625db4c1fdaa94ea7f193a80a850ecb9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/425997
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Bright Ma <mmh1989@foxmail.com>
Commit-Queue: Josip Sokcevic <sokcevic@google.com>
The log message is already formatted before being passed to the colorer.
To avoid the exception "TypeError: not enough arguments for format
string", we should use the `nofmt_colorer` instead.
This bug occurs only when the formatted string still contains '%'
character. The following snippet can reproduce the bug:
```
from repo_logging import RepoLogger
RepoLogger(__name__).error("%s", "100% failed")
```
Change-Id: I4e3977b3d21aec4e0deb95fc1c6dd1e59272d695
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/432017
Tested-by: Shik Chen <shik@google.com>
Commit-Queue: Shik Chen <shik@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
The current logic to create checkout layers doesn't work in all cases.
For example, let's assume there are three projects: "foo", "foo/bar" and
"foo-bar". Sorting lexicographical order is incorrect as foo-bar would
be placed between foo and foo/bar, breaking layering logic.
Instead, we split filepaths based using path delimiter (always /) and
then use lexicographical sort.
BUG=b:325119758
TEST=./run_tests, manual sync on chromiumos repository
Change-Id: I76924c3cc6ba2bb860d7a3e48406a6bba8f58c10
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/412338
Tested-by: Josip Sokcevic <sokcevic@google.com>
Commit-Queue: Josip Sokcevic <sokcevic@google.com>
Reviewed-by: George Engelbrecht <engeg@google.com>
If a repo manifest is updated so that project B is placed within a
project A, and if project A had content in new B's location in the old
checkout, then repo sync could break depending on checkout order, since
B can't be checked out before A.
This change introduces checkout levels which enforces right sequence of
checkouts while still allowing for parallel checkout. In an example
above, A will always be checked out first before B.
BUG=b:325119758
TEST=./run_tests, manual sync on ChromeOS repository
Change-Id: Ib3b5e4d2639ca56620a1e4c6bf76d7b1ab805250
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/410421
Tested-by: Josip Sokcevic <sokcevic@google.com>
Reviewed-by: Greg Edelston <gredelston@google.com>
Commit-Queue: Josip Sokcevic <sokcevic@google.com>
Reviewed-by: Gavin Mak <gavinmak@google.com>
After a6413f5d a GitCommandError is raised.
Since there were no user identity were set up,
it fails:
- ReviewableBranchTests from test_project.py
- ResolveRepoRev and CheckRepoRev from test_wrapper.py
Test: ./run_tests
Change-Id: Id7f5772afe22c77fc4c8f8f0b8be1b627ed42187
Signed-off-by: Vitalii Dmitriev <vitalii.dmitriev@unikie.com>
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/398658
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Vitalii Dmitriev <dmit.vitalii@gmail.com>
Commit-Queue: Vitalii Dmitriev <dmit.vitalii@gmail.com>
Before the change, repo normalizes the urls
with a following format only:
git@github.com:foo/bar
It doesn't cover the following case:
<remote name="org" fetch="git@github.com:org/" />
<project name="somerepo" remote="org" />
Results to:
error: Cannot fetch somerepo
from ssh://git@github.com/org/git@github.com:org/somerepo
Current change fixes it by normalizing this format:
git@github.com:foo
Test: ./run_tests tests/test_manifest_xml.py
Change-Id: I1ad0f5df0d52c0b7229ba4c9a4db4eecb5c1a003
Signed-off-by: Vitalii Dmitriev <vitalii.dmitriev@unikie.com>
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/398337
Commit-Queue: Vitalii Dmitriev <dmit.vitalii@gmail.com>
Tested-by: Vitalii Dmitriev <dmit.vitalii@gmail.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
In the case of a project being removed from the manifest, and in the
path in which the project used to exist, and symlink is place to another
project repo will start to warn about partial syncs when a partial sync
did not occur.
Repro steps:
1) Create a manifest with two projects. Project a -> a/ and project b -> b/
2) Run `repo sync`
3) Remove project b from the manifest.
4) Use `link` in the manifest to link all of Project a to b/
Bug: 314161804
Change-Id: I4a4ac4f70a7038bc7e0c4e0e51ae9fc942411a34
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/395640
Reviewed-by: Gavin Mak <gavinmak@google.com>
Tested-by: Matt Schulte <matsch@google.com>
Commit-Queue: Gavin Mak <gavinmak@google.com>
Currently we don't deal with schema-less URIs like
`git@github.com:foo` at all resulting in a scenario where we append
them to the manifest repo URL.
In order to deal with this, we munge both the manifest URL and the
fetch URL into a format we like and proceed with that.
Bug: https://g-issues.gerritcodereview.com/issues/40010331
Change-Id: I7b79fc4ed276630fdbeb235b94e327b172f0879b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/386954
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Michael Kelly <mkelly@arista.com>
Commit-Queue: Mike Frysinger <vapier@google.com>
- Bump minimum version to Python 3.6.
- Use f-strings in a lot of places.
Change-Id: I2aa70197230fcec2eff8e7c8eb754f20c08075bb
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/389034
Tested-by: Jason R. Coombs <jaraco@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Commit-Queue: Jason R. Coombs <jaraco@google.com>
When parsing the manifest XML, the code looks for a top
level DOM node named "manifest". However, it doesn't check
that it's an element type node so if there is also an XML
document type declaration node present (which has the same
name as the root element) then it selects the wrong node
and hence you end up with no projects defined at all.
Change-Id: I8d101caffbbc2a06e56136ff21302e3f09cfc96b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/390357
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Chris Allen <chris.allen@arm.com>
Commit-Queue: Chris Allen <chris.allen@arm.com>
When running the tests in my environment, tests that derived from `test_wrapper.GitCheckoutTestCase` would fail on commit or tag due to incomplete or incorrect gpg config. Ideally, the tests should not be dependent on the user's git config. This change ensures $HOME (or Windows equivalent) is replaced for the session.
Bug: 302797407
Change-Id: Ib42b712dd7b6602fee6e18329a8c6d52fb9458b9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/388235
Tested-by: Jason R. Coombs <jaraco@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Commit-Queue: Jason R. Coombs <jaraco@google.com>
DeprecationWarning: datetime.datetime.utcnow() is deprecated and
scheduled for removal in a future version. Use timezone-aware objects to
represent datetimes in UTC: datetime.datetime.now(datetime.UTC).
Change-Id: Ia2c46fb87c544d98cc2dd68a829f67d4770b479c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/386615
Tested-by: Łukasz Patron <priv.luk@gmail.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Łukasz Patron <priv.luk@gmail.com>
Commit-Queue: Mike Frysinger <vapier@google.com>
tests/test_subcmds_sync.py::LocalSyncState::test_prune_removed_projects
was failing in Python 3.6 and 3.7 due to topdir not being set with the
following error message:
TypeError: expected str, bytes or os.PathLike object, not MagicMock
topdir is accessed from within PruneRemovedProjects().
Test: tox with Python 3.6 to 3.11
Change-Id: I7ba5144df0a0126c01776384e2178136c3510091
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/382816
Reviewed-by: Mike Frysinger <vapier@google.com>
Commit-Queue: Daniel Kutik <daniel.kutik@lavawerk.com>
Tested-by: Daniel Kutik <daniel.kutik@lavawerk.com>
tests/test_git_superproject.py::SuperprojectTestCase::test_Fetch was
failing in Python 3.6 and 3.7 due to attribute args only being
introduced in Python 3.8. Falling back on old way of accessing
the arguments.
Test: tox with Python 3.6 to 3.11
Change-Id: Iae1934a7bce8cbd6b4519e4dbc92d94e21b43435
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/382818
Tested-by: Daniel Kutik <daniel.kutik@lavawerk.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Commit-Queue: Daniel Kutik <daniel.kutik@lavawerk.com>
Google Python style guide says to import modules.
Clean up all our stdlib imports. Leave the repo ones alone
for now as that's a much bigger shave.
Change-Id: Ida42fc2ae78b86e6b7a6cbc98f94ca04b295f8cc
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/383714
Reviewed-by: Gavin Mak <gavinmak@google.com>
Commit-Queue: Mike Frysinger <vapier@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The repo project is fetched at most once a day and should be ignored
when checking if the tree is partially synced.
Bug: b/286126621, b/271507654
Change-Id: I684ed1669c3b3b9605162f8cc9d57185bb3dfe8e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/383494
Commit-Queue: Gavin Mak <gavinmak@google.com>
Tested-by: Gavin Mak <gavinmak@google.com>
Reviewed-by: Josip Sokcevic <sokcevic@google.com>
There was a bug in error handeling code that caused an uncaught
exception to be raised.
Bug: b/296316540
Change-Id: I49c72f29c00f26ba60de552f958bc6eddf841162
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/383254
Reviewed-by: Mike Frysinger <vapier@google.com>
Commit-Queue: Jason Chang <jasonnc@google.com>
Tested-by: Jason Chang <jasonnc@google.com>
Partial syncs are not supported and can lead to strange behavior like
deleting files. Explicitly warn users on partial sync.
Bug: b/286126621, b/271507654
Change-Id: I471f78ac5942eb855bc34c80af47aa561dfa61e8
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/382154
Reviewed-by: Jason Chang <jasonnc@google.com>
Reviewed-by: Aravind Vasudevan <aravindvasudev@google.com>
Tested-by: Gavin Mak <gavinmak@google.com>
Commit-Queue: Gavin Mak <gavinmak@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Josip Sokcevic <sokcevic@google.com>
Prior to this change there is no way to distinguish between git sessions logs
generated from repo source v.s. from git.
Bug: b/294446468
Change-Id: I309f59e146c30cb08a0637e8d0b9c5d9efd5cada
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/381794
Commit-Queue: Jason Chang <jasonnc@google.com>
Reviewed-by: Joanna Wang <jojwang@google.com>
Tested-by: Jason Chang <jasonnc@google.com>
Per discussion in go/repo-error-update updated aggregated and exit
errors for sync command.
Aggregated errors are errors that result in eventual command failure.
Exit errors are errors that result in immediate command failure.
Also updated main.py to log aggregated and exit errors to git sessions
log
Bug: b/293344017
Change-Id: I77a21f14da32fe2e68c16841feb22de72e86a251
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/379614
Reviewed-by: Aravind Vasudevan <aravindvasudev@google.com>
Tested-by: Jason Chang <jasonnc@google.com>
Commit-Queue: Jason Chang <jasonnc@google.com>
In order to better analyze and track repo errors, repo command failures
need to be tied to specific errors in repo source code.
Additionally a new GitCommandError was added to differentiate between
general git related errors to failed git commands. Git commands that opt
into verification will raise a GitCommandError if the command failed.
The first step in this process is a general error refactoring
Bug: b/293344017
Change-Id: I46944b1825ce892757c8dd3f7e2fab7e460760c0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/380994
Commit-Queue: Jason Chang <jasonnc@google.com>
Reviewed-by: Aravind Vasudevan <aravindvasudev@google.com>
Tested-by: Jason Chang <jasonnc@google.com>
Reviewed-by: Joanna Wang <jojwang@google.com>
Save the latest time any project is fetched and checked out. This will
be used to detect partial checkouts.
Bug: b/286126621
Change-Id: I53b264dc70ba168d506076dbd693ef79a696b61d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/380514
Commit-Queue: Gavin Mak <gavinmak@google.com>
Reviewed-by: Joanna Wang <jojwang@google.com>
Tested-by: Gavin Mak <gavinmak@google.com>
A something.xml that gets included by two different
files, that both remove and add same shared project
to two different locations, would not work
prior to this change.
Reason is that remove killed all name keys, even
though reuse of same repo in different locations
is allowed.
Solve by adding optional attrib path to
<remove-project name="foo" path="only_this_path" />
and tweak remove-project.
Behaves as before without path, and deletes
more selectively when remove path is supplied.
As secondary feature, a project can now also be removed
by only using path, assuming a matching project name
can be found.
Change-Id: I502d9f949f5d858ddc1503846b170473f76dc8e2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/375694
Tested-by: Fredrik de Groot <fredrik.de.groot@aptiv.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
If the Debian banner is not used, then there won't be a space after the
version number: it'll be followed directly by a comma.
Bug: https://crbug.com/gerrit/16903
Change-Id: I12b873f32afc9424f42b772399c346f96ca95a96
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/372875
Tested-by: Saagar Jha <saagarjha@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Attribute groups can now be added to manifest include, thus
all projects in an included manifest file can easily modify
default branch without modifying all projects in that manifest file.
For example,
the main manifest.xml has an include node contain revision attribute,
```
<include name="include.xml" revision="r1" />
```
and the include.xml has some projects,
```
<project path="project1_path" name="project1_name" revision="r2" />
<project path="project2_path" name="project2_name" />
```
With this change, the final manifest will have revision="r1" for project2.
```
<project name="project1_name" path="project1_path" revision="r2" />
<project name="project2_name" path="project2_path" revision="r1" />
```
Test: added unit tests to cover the inheritance
Change-Id: I4b8547a7198610ec3a3c6aeb2136e0c0f3557df0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/369714
Reviewed-by: Mike Frysinger <vapier@google.com>
Commit-Queue: Shuchuan Zeng <zengshuchuan@allwinnertech.com>
Tested-by: Shuchuan Zeng <zengshuchuan@allwinnertech.com>
We use dashes in --long-options, not underscores, so add a test to
make sure people don't accidentally add them.
Change-Id: Iffbce474d22cf1f6c2042f7882f215875c8df3cf
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/369734
Reviewed-by: Gavin Mak <gavinmak@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Commit-Queue: Mike Frysinger <vapier@google.com>
Apply rules set by https://gerrit-review.googlesource.com/c/git-repo/+/362954/ across the codebase and fix any lingering errors caught
by flake8. Also check black formatting in run_tests (and CQ).
Bug: b/267675342
Change-Id: I972d77649dac351150dcfeb1cd1ad0ea2efc1956
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/363474
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Gavin Mak <gavinmak@google.com>
Commit-Queue: Gavin Mak <gavinmak@google.com>
We don't want symlinks in the git tree as it causes pain for Windows
users. We also don't really need it as we can refactor the code we
want to import slightly.
Change-Id: I4537c07c50ee9449e9f53e0f132a386e8ffe16ec
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/354356
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: LaMont Jones <lamontjones@google.com>
