Incorrect tuple values were returned with http://go/grev/440221 -
instead of returning (Project, ReviewableBranch), _ProcessResults was
returning (int, ReviewableBranch).
R=jojwang@google.com
Bug: 376731172
Change-Id: I75205f42fd23f5ee6bd8d0c15b18066189b42bd9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/441121
Reviewed-by: Sam Saccone <samccone@google.com>
Commit-Queue: Josip Sokcevic <sokcevic@google.com>
Tested-by: Josip Sokcevic <sokcevic@google.com>
The manifest usually doesn't sepecify the revision with the full name
(e.g. refs/heads/REV).
However, when checking if the name of the merge branch, full name is
used on the merge branch.
The CL use full name of revision when comparing it with the merge
branch.
Bug: b/370919047
Test: repo upload on a project with `dest-branch` set
Change-Id: Ib6fa2f7246beb5bae0a26a70048a7ac03b6c5a2f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/438401
Reviewed-by: Josip Sokcevic <sokcevic@google.com>
Tested-by: Joe Hsu <joehsu@google.com>
Commit-Queue: Josip Sokcevic <sokcevic@google.com>
Let people specify the exact topic when uploading CLs. The existing
-t option only supports setting the topic to the current local branch.
Add a --topic-branch long option to the existing -t to align it a bit
better with --hashtag & --hashtag-branch.
Change-Id: I010abc4a7f3c685021cae776dd1e597c22b79135
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/431997
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: Gavin Mak <gavinmak@google.com>
Commit-Queue: Mike Frysinger <vapier@google.com>
git push, like most git commands, does not warn or otherwise prompt
users when there are local uncommitted changes. To simplify the
upload logic, and to harmonize repo upload with git push as a more
git-esque flow, stop checking/warning/prompting the user here too.
Change-Id: Iee18132f0faad0881f1a796cb58821328e04b694
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/425337
Reviewed-by: Josip Sokcevic <sokcevic@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Commit-Queue: Mike Frysinger <vapier@google.com>
There was a bug in error handeling code that caused an uncaught
exception to be raised.
Bug: b/296316540
Change-Id: I49c72f29c00f26ba60de552f958bc6eddf841162
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/383254
Reviewed-by: Mike Frysinger <vapier@google.com>
Commit-Queue: Jason Chang <jasonnc@google.com>
Tested-by: Jason Chang <jasonnc@google.com>
Change-Id: I91b99a7147c7c3cb5485d5406316c8ffd79f9272
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/374914
Commit-Queue: Josip Sokcevic <sokcevic@google.com>
Reviewed-by: Joanna Wang <jojwang@google.com>
Tested-by: Josip Sokcevic <sokcevic@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Trace logs emitted from repo are not useful on error for many critical
commands. This change adds errors for critical commands to trace logs.
Change-Id: Ideb9358bee31e540bd84a94327a09ff9b0246a77
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/373814
Reviewed-by: Joanna Wang <jojwang@google.com>
Tested-by: Josip Sokcevic <sokcevic@google.com>
Commit-Queue: Josip Sokcevic <sokcevic@google.com>
Reviewed-by: Gavin Mak <gavinmak@google.com>
Apply rules set by https://gerrit-review.googlesource.com/c/git-repo/+/362954/ across the codebase and fix any lingering errors caught
by flake8. Also check black formatting in run_tests (and CQ).
Bug: b/267675342
Change-Id: I972d77649dac351150dcfeb1cd1ad0ea2efc1956
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/363474
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Gavin Mak <gavinmak@google.com>
Commit-Queue: Gavin Mak <gavinmak@google.com>
dest_branch.
- This still prevents the case mentioned here:
https://gerrit-review.googlesource.com/c/50300
while also supporting dest_branch.
- Update _GetMergeBranch to get merge branches for any branch, not just
the one we happen to run `repo upload` in. (e.g. for uploading multiple
branches)
Bug: b/27955930
Change-Id: Ia8ee1d6a83a783c984bb2eb308bb11b3a721a95d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/360794
Commit-Queue: Joanna Wang <jojwang@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Joanna Wang <jojwang@google.com>
Resolves multiple TODOs. Since we are requiring Python 3,
we move to using print function with flush=True instead of
using sys.stdout.flush().
Change-Id: I54db0344ec78ac81a8d6c6c7e43ee7d301f42f02
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/354701
Tested-by: Daniel Kutik <daniel.kutik@lavawerk.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Add a per-remote option `uploadwarningthreshold` allowing the user to
override how many commits can be uploaded prior to a warning being
displayed.
Change-Id: Ia7e1b2c7de89a0bf9ca1c24cc83dc595b3667437
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/354375
Tested-by: David Greenaway <dgreenaway@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Since the same project can be checked out in multiple paths, we need to
track the "to be uploaded" projects by path, rather than project name.
Bug: crbug.com/gerrit/16260
Test: manual
Change-Id: Ic3dc81bb8acb34886baa6299e90a49c7ba372957
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/351054
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
The `--wip` allow to bulk push changed as work-in-progress. This CL
intend to allow the opposite opperation by removing the wip mark on the
CL and set it to be ready to review
Change-Id: If0743c5b14829f77be2def5a8547060d06a5648c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/342214
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: William Escande <wescande@google.com>
This option will suppress the
Uncommitted changes in ... (did you forget to amend?)
prompt when there are untracked (unknown) files in the working copy.
The prompt is still shown if tracked files are modified.
Change-Id: Ia3fcc82989b7fad09b69214eda31e2d0dfc14600
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/340456
Tested-by: Martin Geisler <mgeisler@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
This way we know we don't need to encode the labels.
Change-Id: Ib83ed8f4ed05f00b9d2d06a9dd3f304e4443430e
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/337518
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: LaMont Jones <lamontjones@google.com>
To be addressed in another change:
- a partial `repo sync` (with a list of projects/paths to sync)
requires `--this-tree-only`.
Change-Id: I6c7400bf001540e9d7694fa70934f8f204cb5f57
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/322657
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Switch it to uppercase to make it clear it's a constant, and add
documentation so its usage is clear.
Change-Id: I6d281a66a90b5908b3131585c9945e88cfe815ea
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/309322
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
We're inconsistent with help text as to whether it uses title case and
whether it ends in a period. Add a test to enforce a standard, and use
the style that Python optparse & argparse use themselves (e.g. with the
--help option): always lowercase, and never trailing period.
Change-Id: Ic1defae23daeac0ac9116aaf487427f50b34050d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/305144
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
For most commands, this is more about providing a way to undo earlier
command line options (e.g. `repo info -c --no-current-branch`) which
can be helpful for scripting & automation. But for the sync command,
this is helpful to undo the setting that exists in the manifest itself.
With this in place, tweak the sync current_branch_only logic to only
apply the manifest settings when the user hasn't specified a command
line option.
Bug: https://crbug.com/gerrit/12401
Change-Id: I21e2384624680cc740d1b5d1e49c50589d2fe6a0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/304903
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
We're inconsistent with the short option for this flag:
* gitc-init: <none as -c is already used>
* info: -b
* init: -c
* overview: -b
* sync: -c
* upload: --cbr
Since info & overview are not as heavily used as the others, switch
them from -b to -c. We leave -b in as a hidden alias for now.
Similarly, switch upload from --cbr to just -c. A lot of people
use --cbr, so we leave this as a hidden alias for now too.
Ideally gitc-init wouldn't use -c, but that ship has sailed, and
we're more likely to deprecate gitc entirely at this point.
This provides a consistent set of options across subcommands.
Bug: https://crbug.com/gerrit/12401
Change-Id: Iec249729223866fe1ea0ebabed12ca851cc38b35
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/304902
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
Search for project branches to upload in parallel. This can cut the
lookup time in half for large projects. We still run the actual hooks
in serial once we have the list of projects to process, but we would
need to rethink things quite a bit before we could handle running them
in parallel too.
Change-Id: I8da0cbc5010566aa860e1a158f3dc07f0709dcff
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/304842
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
When running upload across multiple projects, include the project in
any error messages that come up. This lets users figure out where
the problem might be.
Change-Id: I09470c9a1b512baf910d6d97b747816d1a6f3a87
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/304783
Reviewed-by: Raman Tenneti <rtenneti@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
We're committed to Python 3 at this point, so purge all the
is_python3 related dynamic checks.
Bug: https://crbug.com/gerrit/10418
Change-Id: I4c8b405d6de359b8b83223c9f4b9c8ffa18ea1a2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/292383
Reviewed-by: Chris Mcdonald <cjmcdonald@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The knowledge about running hooks and all its exception handling
is scattered over multiple files. This makes the code harder
to read, but also it requires duplication of logic in case
other RepoHooks are added to different commands.
This refactoring also creates uniform behavior of the hooks
across multiple commands and it guarantees the re-use of the same
arguments on all of them.
Signed-off-by: Remy Bohmer <github@bohmer.net>
Change-Id: Ia4d90eab429e4af00943306e89faec8db35ba29d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/277562
Tested-by: Remy Bohmer <oss@bohmer.net>
Reviewed-by: Mike Frysinger <vapier@google.com>
Instead of assuming the repo client is tracking the "master" branch
of the manifest repo, use the existing info we have to display the
right info to the user.
Bug: https://crbug.com/gerrit/13339
Change-Id: I8b265f4b2e075fdc41909b1f3dff9aee87384353
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/287279
Reviewed-by: Michael Mortensen <mmortensen@google.com>
Tested-by: Mike Frysinger <vapier@google.com>
The project.py file is huge and contains multiple
classes. By moving it to seperate class files the code
becomes more readable and maintainable.
Signed-off-by: Remy Bohmer <github@bohmer.net>
Change-Id: Ida9d99d31751d627ae1ea0373418080696d2e14b
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/281293
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Remy Bohmer <linux@bohmer.net>
If the dest-branch attribute is set in the project manifest, then
we need to push to that branch. Previously, we would unconditionally
pre-pend the refs/heads prefix to it. The dest-branch attribute is
allowed to be a ref expression though, so it may already have it.
Simple fix is to check if it already has the prefix before adding it.
Bug: crbug.com/gerrit/12770
Change-Id: I45d6107ed6cf305cf223023b0ddad4278f7f4146
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/268152
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Sean McAllister <smcallis@google.com>
Draft CLs were replaced by private/wip CLs in Gerrit instead years ago.
Change-Id: If4f3d6606aad40a6f1617a49681dfd45c64d3d37
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256673
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
This adds a CLI option to the existing autoupload gitconfig knob that
allows people to automatically answer "yes" to the various prompts.
Bug: https://crbug.com/gerrit/12368
Change-Id: I819ebca01b9a40240b33866ae05907c7469703e3
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255892
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
This allows users to specify custom hashtags when uploading, both via
the CLI and via the same gitconfig settings as other upload options.
Bug: https://crbug.com/gerrit/11174
Change-Id: Ia0959e25b463e5f29d704e4d06e0de793d4fc77c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255855
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
Show clearer messages and exit non-zero if there's nothing to upload.
Change-Id: Icd9c13b9b1126610a409fc13d1d11bfc66f5e802
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255834
Reviewed-by: David Pursehouse <dpursehouse@collab.net>
Tested-by: Mike Frysinger <vapier@google.com>
All of the instances of this are related to Python 2 names that
don't exist in Python 3, and the warnings are raised when running
flake8 on Python 3.
All of these will go away once we completely remove support for
Python 2, so just suppress them inline. We don't globally suppress
the check so that we will still see legitimate errors if/when they
occur in new code.
Change-Id: Iccf955f50abfc9f83b371fc0af6cceb51037456f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/255039
Tested-by: David Pursehouse <dpursehouse@collab.net>
Reviewed-by: Mike Frysinger <vapier@google.com>
- E301 expected 1 blank line
- E302 expected 2 blank lines
- E303 too many blank lines
- E305 expected 2 blank lines after class or function definition
- E306 expected 1 blank line before a nested definition
Fixed automatically with autopep8:
git ls-files | grep py$ | xargs autopep8 --in-place \
--select E301,E302,E303,E305,E306
Manually fix issues in project.py caused by misuse of block comments.
Change-Id: Iee840fcaff48aae504ddac9c3e76d2acd484f6a9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/254599
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: David Pursehouse <dpursehouse@collab.net>
