git-repo/manifest_xml.py

601 lines
18 KiB
Python
Raw Normal View History

2008-10-21 14:00:00 +00:00
#
# Copyright (C) 2008 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
import os
import re
2008-10-21 14:00:00 +00:00
import sys
import urlparse
2008-10-21 14:00:00 +00:00
import xml.dom.minidom
from git_config import GitConfig, IsId
from project import RemoteSpec, Project, MetaProject, R_HEADS, HEAD
2008-10-21 14:00:00 +00:00
from error import ManifestParseError
MANIFEST_FILE_NAME = 'manifest.xml'
LOCAL_MANIFEST_NAME = 'local_manifest.xml'
2008-10-21 14:00:00 +00:00
urlparse.uses_relative.extend(['ssh', 'git'])
urlparse.uses_netloc.extend(['ssh', 'git'])
2008-10-21 14:00:00 +00:00
class _Default(object):
"""Project defaults within the manifest."""
revisionExpr = None
2008-10-21 14:00:00 +00:00
remote = None
sync_j = 1
2008-10-21 14:00:00 +00:00
class _XmlRemote(object):
def __init__(self,
name,
fetch=None,
manifestUrl=None,
review=None):
self.name = name
self.fetchUrl = fetch
self.manifestUrl = manifestUrl
self.reviewUrl = review
self.resolvedFetchUrl = self._resolveFetchUrl()
def _resolveFetchUrl(self):
url = self.fetchUrl.rstrip('/')
manifestUrl = self.manifestUrl.rstrip('/')
# urljoin will get confused if there is no scheme in the base url
# ie, if manifestUrl is of the form <hostname:port>
if manifestUrl.find(':') != manifestUrl.find('/') - 1:
manifestUrl = 'gopher://' + manifestUrl
url = urlparse.urljoin(manifestUrl, url)
return re.sub(r'^gopher://', '', url)
def ToRemoteSpec(self, projectName):
url = self.resolvedFetchUrl.rstrip('/') + '/' + projectName
return RemoteSpec(self.name, url, self.reviewUrl)
2008-10-21 14:00:00 +00:00
class XmlManifest(object):
2008-10-21 14:00:00 +00:00
"""manages the repo configuration file"""
def __init__(self, repodir):
self.repodir = os.path.abspath(repodir)
self.topdir = os.path.dirname(self.repodir)
self.manifestFile = os.path.join(self.repodir, MANIFEST_FILE_NAME)
self.globalConfig = GitConfig.ForUser()
self.repoProject = MetaProject(self, 'repo',
gitdir = os.path.join(repodir, 'repo/.git'),
worktree = os.path.join(repodir, 'repo'))
self.manifestProject = MetaProject(self, 'manifests',
gitdir = os.path.join(repodir, 'manifests.git'),
worktree = os.path.join(repodir, 'manifests'))
2008-10-21 14:00:00 +00:00
self._Unload()
def Override(self, name):
"""Use a different manifest, just for the current instantiation.
2008-10-21 14:00:00 +00:00
"""
path = os.path.join(self.manifestProject.worktree, name)
if not os.path.isfile(path):
raise ManifestParseError('manifest %s not found' % name)
old = self.manifestFile
try:
self.manifestFile = path
self._Unload()
self._Load()
finally:
self.manifestFile = old
def Link(self, name):
"""Update the repo metadata to use a different manifest.
"""
self.Override(name)
2008-10-21 14:00:00 +00:00
try:
if os.path.exists(self.manifestFile):
os.remove(self.manifestFile)
os.symlink('manifests/%s' % name, self.manifestFile)
except OSError, e:
raise ManifestParseError('cannot link manifest %s' % name)
def _RemoteToXml(self, r, doc, root):
e = doc.createElement('remote')
root.appendChild(e)
e.setAttribute('name', r.name)
e.setAttribute('fetch', r.fetchUrl)
if r.reviewUrl is not None:
e.setAttribute('review', r.reviewUrl)
def Save(self, fd, peg_rev=False):
"""Write the current manifest out to the given file descriptor.
"""
mp = self.manifestProject
groups = mp.config.GetString('manifest.groups')
if groups:
groups = re.split('[,\s]+', groups)
doc = xml.dom.minidom.Document()
root = doc.createElement('manifest')
doc.appendChild(root)
# Save out the notice. There's a little bit of work here to give it the
# right whitespace, which assumes that the notice is automatically indented
# by 4 by minidom.
if self.notice:
notice_element = root.appendChild(doc.createElement('notice'))
notice_lines = self.notice.splitlines()
indented_notice = ('\n'.join(" "*4 + line for line in notice_lines))[4:]
notice_element.appendChild(doc.createTextNode(indented_notice))
d = self.default
sort_remotes = list(self.remotes.keys())
sort_remotes.sort()
for r in sort_remotes:
self._RemoteToXml(self.remotes[r], doc, root)
if self.remotes:
root.appendChild(doc.createTextNode(''))
have_default = False
e = doc.createElement('default')
if d.remote:
have_default = True
e.setAttribute('remote', d.remote.name)
if d.revisionExpr:
have_default = True
e.setAttribute('revision', d.revisionExpr)
if d.sync_j > 1:
have_default = True
e.setAttribute('sync-j', '%d' % d.sync_j)
if have_default:
root.appendChild(e)
root.appendChild(doc.createTextNode(''))
if self._manifest_server:
e = doc.createElement('manifest-server')
e.setAttribute('url', self._manifest_server)
root.appendChild(e)
root.appendChild(doc.createTextNode(''))
sort_projects = list(self.projects.keys())
sort_projects.sort()
for p in sort_projects:
p = self.projects[p]
if not p.MatchesGroups(groups):
continue
e = doc.createElement('project')
root.appendChild(e)
e.setAttribute('name', p.name)
if p.relpath != p.name:
e.setAttribute('path', p.relpath)
if not d.remote or p.remote.name != d.remote.name:
e.setAttribute('remote', p.remote.name)
if peg_rev:
if self.IsMirror:
e.setAttribute('revision',
p.bare_git.rev_parse(p.revisionExpr + '^0'))
else:
e.setAttribute('revision',
p.work_git.rev_parse(HEAD + '^0'))
elif not d.revisionExpr or p.revisionExpr != d.revisionExpr:
e.setAttribute('revision', p.revisionExpr)
for c in p.copyfiles:
ce = doc.createElement('copyfile')
ce.setAttribute('src', c.src)
ce.setAttribute('dest', c.dest)
e.appendChild(ce)
if p.groups:
e.setAttribute('groups', ','.join(p.groups))
for a in p.annotations:
if a.keep == "true":
ae = doc.createElement('annotation')
ae.setAttribute('name', a.name)
ae.setAttribute('value', a.value)
e.appendChild(ae)
Support repo-level pre-upload hook and prep for future hooks. All repo-level hooks are expected to live in a single project at the top level of that project. The name of the hooks project is provided in the manifest.xml. The manifest also lists which hooks are enabled to make it obvious if a file somehow failed to sync down (or got deleted). Before running any hook, we will prompt the user to make sure that it is OK. A user can deny running the hook, allow once, or allow "forever" (until hooks change). This tries to keep with the git spirit of not automatically running anything on the user's computer that got synced down. Note that individual repo commands can add always options to avoid these prompts as they see fit (see below for the 'upload' options). When hooks are run, they are loaded into the current interpreter (the one running repo) and their main() function is run. This mechanism is used (instead of using subprocess) to make it easier to expand to a richer hook interface in the future. During loading, the interpreter's sys.path is updated to contain the directory containing the hooks so that hooks can be split into multiple files. The upload command has two options that control hook behavior: - no-verify=False, verify=False (DEFAULT): If stdout is a tty, can prompt about running upload hooks if needed. If user denies running hooks, the upload is cancelled. If stdout is not a tty and we would need to prompt about upload hooks, upload is cancelled. - no-verify=False, verify=True: Always run upload hooks with no prompt. - no-verify=True, verify=False: Never run upload hooks, but upload anyway (AKA bypass hooks). - no-verify=True, verify=True: Invalid Sample bit of manifest.xml code for enabling hooks (assumes you have a project named 'hooks' where hooks are stored): <repo-hooks in-project="hooks" enabled-list="pre-upload" /> Sample main() function in pre-upload.py in hooks directory: def main(project_list, **kwargs): print ('These projects will be uploaded: %s' % ', '.join(project_list)) print ('I am being a good boy and ignoring anything in kwargs\n' 'that I don\'t understand.') print 'I fail 50% of the time. How flaky.' if random.random() <= .5: raise Exception('Pre-upload hook failed. Have a nice day.') Change-Id: I5cefa2cd5865c72589263cf8e2f152a43c122f70
2011-03-04 19:54:18 +00:00
if self._repo_hooks_project:
root.appendChild(doc.createTextNode(''))
e = doc.createElement('repo-hooks')
e.setAttribute('in-project', self._repo_hooks_project.name)
e.setAttribute('enabled-list',
' '.join(self._repo_hooks_project.enabled_repo_hooks))
root.appendChild(e)
doc.writexml(fd, '', ' ', '\n', 'UTF-8')
2008-10-21 14:00:00 +00:00
@property
def projects(self):
self._Load()
return self._projects
@property
def remotes(self):
self._Load()
return self._remotes
@property
def default(self):
self._Load()
return self._default
Support repo-level pre-upload hook and prep for future hooks. All repo-level hooks are expected to live in a single project at the top level of that project. The name of the hooks project is provided in the manifest.xml. The manifest also lists which hooks are enabled to make it obvious if a file somehow failed to sync down (or got deleted). Before running any hook, we will prompt the user to make sure that it is OK. A user can deny running the hook, allow once, or allow "forever" (until hooks change). This tries to keep with the git spirit of not automatically running anything on the user's computer that got synced down. Note that individual repo commands can add always options to avoid these prompts as they see fit (see below for the 'upload' options). When hooks are run, they are loaded into the current interpreter (the one running repo) and their main() function is run. This mechanism is used (instead of using subprocess) to make it easier to expand to a richer hook interface in the future. During loading, the interpreter's sys.path is updated to contain the directory containing the hooks so that hooks can be split into multiple files. The upload command has two options that control hook behavior: - no-verify=False, verify=False (DEFAULT): If stdout is a tty, can prompt about running upload hooks if needed. If user denies running hooks, the upload is cancelled. If stdout is not a tty and we would need to prompt about upload hooks, upload is cancelled. - no-verify=False, verify=True: Always run upload hooks with no prompt. - no-verify=True, verify=False: Never run upload hooks, but upload anyway (AKA bypass hooks). - no-verify=True, verify=True: Invalid Sample bit of manifest.xml code for enabling hooks (assumes you have a project named 'hooks' where hooks are stored): <repo-hooks in-project="hooks" enabled-list="pre-upload" /> Sample main() function in pre-upload.py in hooks directory: def main(project_list, **kwargs): print ('These projects will be uploaded: %s' % ', '.join(project_list)) print ('I am being a good boy and ignoring anything in kwargs\n' 'that I don\'t understand.') print 'I fail 50% of the time. How flaky.' if random.random() <= .5: raise Exception('Pre-upload hook failed. Have a nice day.') Change-Id: I5cefa2cd5865c72589263cf8e2f152a43c122f70
2011-03-04 19:54:18 +00:00
@property
def repo_hooks_project(self):
self._Load()
return self._repo_hooks_project
@property
def notice(self):
self._Load()
return self._notice
@property
def manifest_server(self):
self._Load()
return self._manifest_server
@property
def IsMirror(self):
return self.manifestProject.config.GetBoolean('repo.mirror')
2008-10-21 14:00:00 +00:00
def _Unload(self):
self._loaded = False
self._projects = {}
self._remotes = {}
self._default = None
Support repo-level pre-upload hook and prep for future hooks. All repo-level hooks are expected to live in a single project at the top level of that project. The name of the hooks project is provided in the manifest.xml. The manifest also lists which hooks are enabled to make it obvious if a file somehow failed to sync down (or got deleted). Before running any hook, we will prompt the user to make sure that it is OK. A user can deny running the hook, allow once, or allow "forever" (until hooks change). This tries to keep with the git spirit of not automatically running anything on the user's computer that got synced down. Note that individual repo commands can add always options to avoid these prompts as they see fit (see below for the 'upload' options). When hooks are run, they are loaded into the current interpreter (the one running repo) and their main() function is run. This mechanism is used (instead of using subprocess) to make it easier to expand to a richer hook interface in the future. During loading, the interpreter's sys.path is updated to contain the directory containing the hooks so that hooks can be split into multiple files. The upload command has two options that control hook behavior: - no-verify=False, verify=False (DEFAULT): If stdout is a tty, can prompt about running upload hooks if needed. If user denies running hooks, the upload is cancelled. If stdout is not a tty and we would need to prompt about upload hooks, upload is cancelled. - no-verify=False, verify=True: Always run upload hooks with no prompt. - no-verify=True, verify=False: Never run upload hooks, but upload anyway (AKA bypass hooks). - no-verify=True, verify=True: Invalid Sample bit of manifest.xml code for enabling hooks (assumes you have a project named 'hooks' where hooks are stored): <repo-hooks in-project="hooks" enabled-list="pre-upload" /> Sample main() function in pre-upload.py in hooks directory: def main(project_list, **kwargs): print ('These projects will be uploaded: %s' % ', '.join(project_list)) print ('I am being a good boy and ignoring anything in kwargs\n' 'that I don\'t understand.') print 'I fail 50% of the time. How flaky.' if random.random() <= .5: raise Exception('Pre-upload hook failed. Have a nice day.') Change-Id: I5cefa2cd5865c72589263cf8e2f152a43c122f70
2011-03-04 19:54:18 +00:00
self._repo_hooks_project = None
self._notice = None
2008-10-21 14:00:00 +00:00
self.branch = None
self._manifest_server = None
2008-10-21 14:00:00 +00:00
def _Load(self):
if not self._loaded:
m = self.manifestProject
b = m.GetBranch(m.CurrentBranch).merge
if b is not None and b.startswith(R_HEADS):
b = b[len(R_HEADS):]
self.branch = b
self._ParseManifest(True)
local = os.path.join(self.repodir, LOCAL_MANIFEST_NAME)
if os.path.exists(local):
try:
real = self.manifestFile
self.manifestFile = local
self._ParseManifest(False)
finally:
self.manifestFile = real
if self.IsMirror:
self._AddMetaProjectMirror(self.repoProject)
self._AddMetaProjectMirror(self.manifestProject)
2008-10-21 14:00:00 +00:00
self._loaded = True
def _ParseManifest(self, is_root_file):
2008-10-21 14:00:00 +00:00
root = xml.dom.minidom.parse(self.manifestFile)
if not root or not root.childNodes:
Support repo-level pre-upload hook and prep for future hooks. All repo-level hooks are expected to live in a single project at the top level of that project. The name of the hooks project is provided in the manifest.xml. The manifest also lists which hooks are enabled to make it obvious if a file somehow failed to sync down (or got deleted). Before running any hook, we will prompt the user to make sure that it is OK. A user can deny running the hook, allow once, or allow "forever" (until hooks change). This tries to keep with the git spirit of not automatically running anything on the user's computer that got synced down. Note that individual repo commands can add always options to avoid these prompts as they see fit (see below for the 'upload' options). When hooks are run, they are loaded into the current interpreter (the one running repo) and their main() function is run. This mechanism is used (instead of using subprocess) to make it easier to expand to a richer hook interface in the future. During loading, the interpreter's sys.path is updated to contain the directory containing the hooks so that hooks can be split into multiple files. The upload command has two options that control hook behavior: - no-verify=False, verify=False (DEFAULT): If stdout is a tty, can prompt about running upload hooks if needed. If user denies running hooks, the upload is cancelled. If stdout is not a tty and we would need to prompt about upload hooks, upload is cancelled. - no-verify=False, verify=True: Always run upload hooks with no prompt. - no-verify=True, verify=False: Never run upload hooks, but upload anyway (AKA bypass hooks). - no-verify=True, verify=True: Invalid Sample bit of manifest.xml code for enabling hooks (assumes you have a project named 'hooks' where hooks are stored): <repo-hooks in-project="hooks" enabled-list="pre-upload" /> Sample main() function in pre-upload.py in hooks directory: def main(project_list, **kwargs): print ('These projects will be uploaded: %s' % ', '.join(project_list)) print ('I am being a good boy and ignoring anything in kwargs\n' 'that I don\'t understand.') print 'I fail 50% of the time. How flaky.' if random.random() <= .5: raise Exception('Pre-upload hook failed. Have a nice day.') Change-Id: I5cefa2cd5865c72589263cf8e2f152a43c122f70
2011-03-04 19:54:18 +00:00
raise ManifestParseError(
"no root node in %s" %
self.manifestFile)
2008-10-21 14:00:00 +00:00
config = root.childNodes[0]
if config.nodeName != 'manifest':
Support repo-level pre-upload hook and prep for future hooks. All repo-level hooks are expected to live in a single project at the top level of that project. The name of the hooks project is provided in the manifest.xml. The manifest also lists which hooks are enabled to make it obvious if a file somehow failed to sync down (or got deleted). Before running any hook, we will prompt the user to make sure that it is OK. A user can deny running the hook, allow once, or allow "forever" (until hooks change). This tries to keep with the git spirit of not automatically running anything on the user's computer that got synced down. Note that individual repo commands can add always options to avoid these prompts as they see fit (see below for the 'upload' options). When hooks are run, they are loaded into the current interpreter (the one running repo) and their main() function is run. This mechanism is used (instead of using subprocess) to make it easier to expand to a richer hook interface in the future. During loading, the interpreter's sys.path is updated to contain the directory containing the hooks so that hooks can be split into multiple files. The upload command has two options that control hook behavior: - no-verify=False, verify=False (DEFAULT): If stdout is a tty, can prompt about running upload hooks if needed. If user denies running hooks, the upload is cancelled. If stdout is not a tty and we would need to prompt about upload hooks, upload is cancelled. - no-verify=False, verify=True: Always run upload hooks with no prompt. - no-verify=True, verify=False: Never run upload hooks, but upload anyway (AKA bypass hooks). - no-verify=True, verify=True: Invalid Sample bit of manifest.xml code for enabling hooks (assumes you have a project named 'hooks' where hooks are stored): <repo-hooks in-project="hooks" enabled-list="pre-upload" /> Sample main() function in pre-upload.py in hooks directory: def main(project_list, **kwargs): print ('These projects will be uploaded: %s' % ', '.join(project_list)) print ('I am being a good boy and ignoring anything in kwargs\n' 'that I don\'t understand.') print 'I fail 50% of the time. How flaky.' if random.random() <= .5: raise Exception('Pre-upload hook failed. Have a nice day.') Change-Id: I5cefa2cd5865c72589263cf8e2f152a43c122f70
2011-03-04 19:54:18 +00:00
raise ManifestParseError(
"no <manifest> in %s" %
self.manifestFile)
2008-10-21 14:00:00 +00:00
for node in config.childNodes:
if node.nodeName == 'remove-project':
name = self._reqatt(node, 'name')
try:
del self._projects[name]
except KeyError:
Support repo-level pre-upload hook and prep for future hooks. All repo-level hooks are expected to live in a single project at the top level of that project. The name of the hooks project is provided in the manifest.xml. The manifest also lists which hooks are enabled to make it obvious if a file somehow failed to sync down (or got deleted). Before running any hook, we will prompt the user to make sure that it is OK. A user can deny running the hook, allow once, or allow "forever" (until hooks change). This tries to keep with the git spirit of not automatically running anything on the user's computer that got synced down. Note that individual repo commands can add always options to avoid these prompts as they see fit (see below for the 'upload' options). When hooks are run, they are loaded into the current interpreter (the one running repo) and their main() function is run. This mechanism is used (instead of using subprocess) to make it easier to expand to a richer hook interface in the future. During loading, the interpreter's sys.path is updated to contain the directory containing the hooks so that hooks can be split into multiple files. The upload command has two options that control hook behavior: - no-verify=False, verify=False (DEFAULT): If stdout is a tty, can prompt about running upload hooks if needed. If user denies running hooks, the upload is cancelled. If stdout is not a tty and we would need to prompt about upload hooks, upload is cancelled. - no-verify=False, verify=True: Always run upload hooks with no prompt. - no-verify=True, verify=False: Never run upload hooks, but upload anyway (AKA bypass hooks). - no-verify=True, verify=True: Invalid Sample bit of manifest.xml code for enabling hooks (assumes you have a project named 'hooks' where hooks are stored): <repo-hooks in-project="hooks" enabled-list="pre-upload" /> Sample main() function in pre-upload.py in hooks directory: def main(project_list, **kwargs): print ('These projects will be uploaded: %s' % ', '.join(project_list)) print ('I am being a good boy and ignoring anything in kwargs\n' 'that I don\'t understand.') print 'I fail 50% of the time. How flaky.' if random.random() <= .5: raise Exception('Pre-upload hook failed. Have a nice day.') Change-Id: I5cefa2cd5865c72589263cf8e2f152a43c122f70
2011-03-04 19:54:18 +00:00
raise ManifestParseError(
'project %s not found' %
(name))
# If the manifest removes the hooks project, treat it as if it deleted
# the repo-hooks element too.
if self._repo_hooks_project and (self._repo_hooks_project.name == name):
self._repo_hooks_project = None
for node in config.childNodes:
2008-10-21 14:00:00 +00:00
if node.nodeName == 'remote':
remote = self._ParseRemote(node)
if self._remotes.get(remote.name):
Support repo-level pre-upload hook and prep for future hooks. All repo-level hooks are expected to live in a single project at the top level of that project. The name of the hooks project is provided in the manifest.xml. The manifest also lists which hooks are enabled to make it obvious if a file somehow failed to sync down (or got deleted). Before running any hook, we will prompt the user to make sure that it is OK. A user can deny running the hook, allow once, or allow "forever" (until hooks change). This tries to keep with the git spirit of not automatically running anything on the user's computer that got synced down. Note that individual repo commands can add always options to avoid these prompts as they see fit (see below for the 'upload' options). When hooks are run, they are loaded into the current interpreter (the one running repo) and their main() function is run. This mechanism is used (instead of using subprocess) to make it easier to expand to a richer hook interface in the future. During loading, the interpreter's sys.path is updated to contain the directory containing the hooks so that hooks can be split into multiple files. The upload command has two options that control hook behavior: - no-verify=False, verify=False (DEFAULT): If stdout is a tty, can prompt about running upload hooks if needed. If user denies running hooks, the upload is cancelled. If stdout is not a tty and we would need to prompt about upload hooks, upload is cancelled. - no-verify=False, verify=True: Always run upload hooks with no prompt. - no-verify=True, verify=False: Never run upload hooks, but upload anyway (AKA bypass hooks). - no-verify=True, verify=True: Invalid Sample bit of manifest.xml code for enabling hooks (assumes you have a project named 'hooks' where hooks are stored): <repo-hooks in-project="hooks" enabled-list="pre-upload" /> Sample main() function in pre-upload.py in hooks directory: def main(project_list, **kwargs): print ('These projects will be uploaded: %s' % ', '.join(project_list)) print ('I am being a good boy and ignoring anything in kwargs\n' 'that I don\'t understand.') print 'I fail 50% of the time. How flaky.' if random.random() <= .5: raise Exception('Pre-upload hook failed. Have a nice day.') Change-Id: I5cefa2cd5865c72589263cf8e2f152a43c122f70
2011-03-04 19:54:18 +00:00
raise ManifestParseError(
'duplicate remote %s in %s' %
(remote.name, self.manifestFile))
2008-10-21 14:00:00 +00:00
self._remotes[remote.name] = remote
for node in config.childNodes:
if node.nodeName == 'default':
if self._default is not None:
Support repo-level pre-upload hook and prep for future hooks. All repo-level hooks are expected to live in a single project at the top level of that project. The name of the hooks project is provided in the manifest.xml. The manifest also lists which hooks are enabled to make it obvious if a file somehow failed to sync down (or got deleted). Before running any hook, we will prompt the user to make sure that it is OK. A user can deny running the hook, allow once, or allow "forever" (until hooks change). This tries to keep with the git spirit of not automatically running anything on the user's computer that got synced down. Note that individual repo commands can add always options to avoid these prompts as they see fit (see below for the 'upload' options). When hooks are run, they are loaded into the current interpreter (the one running repo) and their main() function is run. This mechanism is used (instead of using subprocess) to make it easier to expand to a richer hook interface in the future. During loading, the interpreter's sys.path is updated to contain the directory containing the hooks so that hooks can be split into multiple files. The upload command has two options that control hook behavior: - no-verify=False, verify=False (DEFAULT): If stdout is a tty, can prompt about running upload hooks if needed. If user denies running hooks, the upload is cancelled. If stdout is not a tty and we would need to prompt about upload hooks, upload is cancelled. - no-verify=False, verify=True: Always run upload hooks with no prompt. - no-verify=True, verify=False: Never run upload hooks, but upload anyway (AKA bypass hooks). - no-verify=True, verify=True: Invalid Sample bit of manifest.xml code for enabling hooks (assumes you have a project named 'hooks' where hooks are stored): <repo-hooks in-project="hooks" enabled-list="pre-upload" /> Sample main() function in pre-upload.py in hooks directory: def main(project_list, **kwargs): print ('These projects will be uploaded: %s' % ', '.join(project_list)) print ('I am being a good boy and ignoring anything in kwargs\n' 'that I don\'t understand.') print 'I fail 50% of the time. How flaky.' if random.random() <= .5: raise Exception('Pre-upload hook failed. Have a nice day.') Change-Id: I5cefa2cd5865c72589263cf8e2f152a43c122f70
2011-03-04 19:54:18 +00:00
raise ManifestParseError(
'duplicate default in %s' %
(self.manifestFile))
2008-10-21 14:00:00 +00:00
self._default = self._ParseDefault(node)
if self._default is None:
self._default = _Default()
for node in config.childNodes:
if node.nodeName == 'notice':
if self._notice is not None:
Support repo-level pre-upload hook and prep for future hooks. All repo-level hooks are expected to live in a single project at the top level of that project. The name of the hooks project is provided in the manifest.xml. The manifest also lists which hooks are enabled to make it obvious if a file somehow failed to sync down (or got deleted). Before running any hook, we will prompt the user to make sure that it is OK. A user can deny running the hook, allow once, or allow "forever" (until hooks change). This tries to keep with the git spirit of not automatically running anything on the user's computer that got synced down. Note that individual repo commands can add always options to avoid these prompts as they see fit (see below for the 'upload' options). When hooks are run, they are loaded into the current interpreter (the one running repo) and their main() function is run. This mechanism is used (instead of using subprocess) to make it easier to expand to a richer hook interface in the future. During loading, the interpreter's sys.path is updated to contain the directory containing the hooks so that hooks can be split into multiple files. The upload command has two options that control hook behavior: - no-verify=False, verify=False (DEFAULT): If stdout is a tty, can prompt about running upload hooks if needed. If user denies running hooks, the upload is cancelled. If stdout is not a tty and we would need to prompt about upload hooks, upload is cancelled. - no-verify=False, verify=True: Always run upload hooks with no prompt. - no-verify=True, verify=False: Never run upload hooks, but upload anyway (AKA bypass hooks). - no-verify=True, verify=True: Invalid Sample bit of manifest.xml code for enabling hooks (assumes you have a project named 'hooks' where hooks are stored): <repo-hooks in-project="hooks" enabled-list="pre-upload" /> Sample main() function in pre-upload.py in hooks directory: def main(project_list, **kwargs): print ('These projects will be uploaded: %s' % ', '.join(project_list)) print ('I am being a good boy and ignoring anything in kwargs\n' 'that I don\'t understand.') print 'I fail 50% of the time. How flaky.' if random.random() <= .5: raise Exception('Pre-upload hook failed. Have a nice day.') Change-Id: I5cefa2cd5865c72589263cf8e2f152a43c122f70
2011-03-04 19:54:18 +00:00
raise ManifestParseError(
'duplicate notice in %s' %
(self.manifestFile))
self._notice = self._ParseNotice(node)
for node in config.childNodes:
if node.nodeName == 'manifest-server':
url = self._reqatt(node, 'url')
if self._manifest_server is not None:
Support repo-level pre-upload hook and prep for future hooks. All repo-level hooks are expected to live in a single project at the top level of that project. The name of the hooks project is provided in the manifest.xml. The manifest also lists which hooks are enabled to make it obvious if a file somehow failed to sync down (or got deleted). Before running any hook, we will prompt the user to make sure that it is OK. A user can deny running the hook, allow once, or allow "forever" (until hooks change). This tries to keep with the git spirit of not automatically running anything on the user's computer that got synced down. Note that individual repo commands can add always options to avoid these prompts as they see fit (see below for the 'upload' options). When hooks are run, they are loaded into the current interpreter (the one running repo) and their main() function is run. This mechanism is used (instead of using subprocess) to make it easier to expand to a richer hook interface in the future. During loading, the interpreter's sys.path is updated to contain the directory containing the hooks so that hooks can be split into multiple files. The upload command has two options that control hook behavior: - no-verify=False, verify=False (DEFAULT): If stdout is a tty, can prompt about running upload hooks if needed. If user denies running hooks, the upload is cancelled. If stdout is not a tty and we would need to prompt about upload hooks, upload is cancelled. - no-verify=False, verify=True: Always run upload hooks with no prompt. - no-verify=True, verify=False: Never run upload hooks, but upload anyway (AKA bypass hooks). - no-verify=True, verify=True: Invalid Sample bit of manifest.xml code for enabling hooks (assumes you have a project named 'hooks' where hooks are stored): <repo-hooks in-project="hooks" enabled-list="pre-upload" /> Sample main() function in pre-upload.py in hooks directory: def main(project_list, **kwargs): print ('These projects will be uploaded: %s' % ', '.join(project_list)) print ('I am being a good boy and ignoring anything in kwargs\n' 'that I don\'t understand.') print 'I fail 50% of the time. How flaky.' if random.random() <= .5: raise Exception('Pre-upload hook failed. Have a nice day.') Change-Id: I5cefa2cd5865c72589263cf8e2f152a43c122f70
2011-03-04 19:54:18 +00:00
raise ManifestParseError(
'duplicate manifest-server in %s' %
(self.manifestFile))
self._manifest_server = url
2008-10-21 14:00:00 +00:00
for node in config.childNodes:
if node.nodeName == 'project':
project = self._ParseProject(node)
if self._projects.get(project.name):
Support repo-level pre-upload hook and prep for future hooks. All repo-level hooks are expected to live in a single project at the top level of that project. The name of the hooks project is provided in the manifest.xml. The manifest also lists which hooks are enabled to make it obvious if a file somehow failed to sync down (or got deleted). Before running any hook, we will prompt the user to make sure that it is OK. A user can deny running the hook, allow once, or allow "forever" (until hooks change). This tries to keep with the git spirit of not automatically running anything on the user's computer that got synced down. Note that individual repo commands can add always options to avoid these prompts as they see fit (see below for the 'upload' options). When hooks are run, they are loaded into the current interpreter (the one running repo) and their main() function is run. This mechanism is used (instead of using subprocess) to make it easier to expand to a richer hook interface in the future. During loading, the interpreter's sys.path is updated to contain the directory containing the hooks so that hooks can be split into multiple files. The upload command has two options that control hook behavior: - no-verify=False, verify=False (DEFAULT): If stdout is a tty, can prompt about running upload hooks if needed. If user denies running hooks, the upload is cancelled. If stdout is not a tty and we would need to prompt about upload hooks, upload is cancelled. - no-verify=False, verify=True: Always run upload hooks with no prompt. - no-verify=True, verify=False: Never run upload hooks, but upload anyway (AKA bypass hooks). - no-verify=True, verify=True: Invalid Sample bit of manifest.xml code for enabling hooks (assumes you have a project named 'hooks' where hooks are stored): <repo-hooks in-project="hooks" enabled-list="pre-upload" /> Sample main() function in pre-upload.py in hooks directory: def main(project_list, **kwargs): print ('These projects will be uploaded: %s' % ', '.join(project_list)) print ('I am being a good boy and ignoring anything in kwargs\n' 'that I don\'t understand.') print 'I fail 50% of the time. How flaky.' if random.random() <= .5: raise Exception('Pre-upload hook failed. Have a nice day.') Change-Id: I5cefa2cd5865c72589263cf8e2f152a43c122f70
2011-03-04 19:54:18 +00:00
raise ManifestParseError(
'duplicate project %s in %s' %
(project.name, self.manifestFile))
2008-10-21 14:00:00 +00:00
self._projects[project.name] = project
Support repo-level pre-upload hook and prep for future hooks. All repo-level hooks are expected to live in a single project at the top level of that project. The name of the hooks project is provided in the manifest.xml. The manifest also lists which hooks are enabled to make it obvious if a file somehow failed to sync down (or got deleted). Before running any hook, we will prompt the user to make sure that it is OK. A user can deny running the hook, allow once, or allow "forever" (until hooks change). This tries to keep with the git spirit of not automatically running anything on the user's computer that got synced down. Note that individual repo commands can add always options to avoid these prompts as they see fit (see below for the 'upload' options). When hooks are run, they are loaded into the current interpreter (the one running repo) and their main() function is run. This mechanism is used (instead of using subprocess) to make it easier to expand to a richer hook interface in the future. During loading, the interpreter's sys.path is updated to contain the directory containing the hooks so that hooks can be split into multiple files. The upload command has two options that control hook behavior: - no-verify=False, verify=False (DEFAULT): If stdout is a tty, can prompt about running upload hooks if needed. If user denies running hooks, the upload is cancelled. If stdout is not a tty and we would need to prompt about upload hooks, upload is cancelled. - no-verify=False, verify=True: Always run upload hooks with no prompt. - no-verify=True, verify=False: Never run upload hooks, but upload anyway (AKA bypass hooks). - no-verify=True, verify=True: Invalid Sample bit of manifest.xml code for enabling hooks (assumes you have a project named 'hooks' where hooks are stored): <repo-hooks in-project="hooks" enabled-list="pre-upload" /> Sample main() function in pre-upload.py in hooks directory: def main(project_list, **kwargs): print ('These projects will be uploaded: %s' % ', '.join(project_list)) print ('I am being a good boy and ignoring anything in kwargs\n' 'that I don\'t understand.') print 'I fail 50% of the time. How flaky.' if random.random() <= .5: raise Exception('Pre-upload hook failed. Have a nice day.') Change-Id: I5cefa2cd5865c72589263cf8e2f152a43c122f70
2011-03-04 19:54:18 +00:00
for node in config.childNodes:
if node.nodeName == 'repo-hooks':
# Get the name of the project and the (space-separated) list of enabled.
repo_hooks_project = self._reqatt(node, 'in-project')
enabled_repo_hooks = self._reqatt(node, 'enabled-list').split()
# Only one project can be the hooks project
if self._repo_hooks_project is not None:
raise ManifestParseError(
'duplicate repo-hooks in %s' %
(self.manifestFile))
# Store a reference to the Project.
try:
self._repo_hooks_project = self._projects[repo_hooks_project]
except KeyError:
raise ManifestParseError(
'project %s not found for repo-hooks' %
(repo_hooks_project))
# Store the enabled hooks in the Project object.
self._repo_hooks_project.enabled_repo_hooks = enabled_repo_hooks
def _AddMetaProjectMirror(self, m):
name = None
m_url = m.GetRemote(m.remote.name).url
if m_url.endswith('/.git'):
raise ManifestParseError, 'refusing to mirror %s' % m_url
if self._default and self._default.remote:
url = self._default.remote.resolvedFetchUrl
if not url.endswith('/'):
url += '/'
if m_url.startswith(url):
remote = self._default.remote
name = m_url[len(url):]
if name is None:
s = m_url.rindex('/') + 1
manifestUrl = self.manifestProject.config.GetString('remote.origin.url')
remote = _XmlRemote('origin', m_url[:s], manifestUrl)
name = m_url[s:]
if name.endswith('.git'):
name = name[:-4]
if name not in self._projects:
m.PreSync()
gitdir = os.path.join(self.topdir, '%s.git' % name)
project = Project(manifest = self,
name = name,
remote = remote.ToRemoteSpec(name),
gitdir = gitdir,
worktree = None,
relpath = None,
revisionExpr = m.revisionExpr,
revisionId = None)
self._projects[project.name] = project
2008-10-21 14:00:00 +00:00
def _ParseRemote(self, node):
"""
reads a <remote> element from the manifest file
"""
name = self._reqatt(node, 'name')
fetch = self._reqatt(node, 'fetch')
review = node.getAttribute('review')
if review == '':
review = None
manifestUrl = self.manifestProject.config.GetString('remote.origin.url')
return _XmlRemote(name, fetch, manifestUrl, review)
2008-10-21 14:00:00 +00:00
def _ParseDefault(self, node):
"""
reads a <default> element from the manifest file
"""
d = _Default()
d.remote = self._get_remote(node)
d.revisionExpr = node.getAttribute('revision')
if d.revisionExpr == '':
d.revisionExpr = None
sync_j = node.getAttribute('sync-j')
if sync_j == '' or sync_j is None:
d.sync_j = 1
else:
d.sync_j = int(sync_j)
2008-10-21 14:00:00 +00:00
return d
def _ParseNotice(self, node):
"""
reads a <notice> element from the manifest file
The <notice> element is distinct from other tags in the XML in that the
data is conveyed between the start and end tag (it's not an empty-element
tag).
The white space (carriage returns, indentation) for the notice element is
relevant and is parsed in a way that is based on how python docstrings work.
In fact, the code is remarkably similar to here:
http://www.python.org/dev/peps/pep-0257/
"""
# Get the data out of the node...
notice = node.childNodes[0].data
# Figure out minimum indentation, skipping the first line (the same line
# as the <notice> tag)...
minIndent = sys.maxint
lines = notice.splitlines()
for line in lines[1:]:
lstrippedLine = line.lstrip()
if lstrippedLine:
indent = len(line) - len(lstrippedLine)
minIndent = min(indent, minIndent)
# Strip leading / trailing blank lines and also indentation.
cleanLines = [lines[0].strip()]
for line in lines[1:]:
cleanLines.append(line[minIndent:].rstrip())
# Clear completely blank lines from front and back...
while cleanLines and not cleanLines[0]:
del cleanLines[0]
while cleanLines and not cleanLines[-1]:
del cleanLines[-1]
return '\n'.join(cleanLines)
2008-10-21 14:00:00 +00:00
def _ParseProject(self, node):
"""
reads a <project> element from the manifest file
"""
2008-10-21 14:00:00 +00:00
name = self._reqatt(node, 'name')
remote = self._get_remote(node)
if remote is None:
remote = self._default.remote
if remote is None:
raise ManifestParseError, \
"no remote for project %s within %s" % \
(name, self.manifestFile)
revisionExpr = node.getAttribute('revision')
if not revisionExpr:
revisionExpr = self._default.revisionExpr
if not revisionExpr:
2008-10-21 14:00:00 +00:00
raise ManifestParseError, \
"no revision for project %s within %s" % \
(name, self.manifestFile)
path = node.getAttribute('path')
if not path:
path = name
if path.startswith('/'):
raise ManifestParseError, \
"project %s path cannot be absolute in %s" % \
(name, self.manifestFile)
rebase = node.getAttribute('rebase')
if not rebase:
rebase = True
else:
rebase = rebase.lower() in ("yes", "true", "1")
groups = node.getAttribute('groups')
if groups:
groups = re.split('[,\s]+', groups)
else:
groups = None
if self.IsMirror:
relpath = None
worktree = None
gitdir = os.path.join(self.topdir, '%s.git' % name)
else:
worktree = os.path.join(self.topdir, path).replace('\\', '/')
gitdir = os.path.join(self.repodir, 'projects/%s.git' % path)
2008-10-21 14:00:00 +00:00
project = Project(manifest = self,
name = name,
remote = remote.ToRemoteSpec(name),
2008-10-21 14:00:00 +00:00
gitdir = gitdir,
worktree = worktree,
relpath = path,
revisionExpr = revisionExpr,
revisionId = None,
rebase = rebase,
groups = groups)
2008-10-21 14:00:00 +00:00
for n in node.childNodes:
if n.nodeName == 'copyfile':
2008-10-21 14:00:00 +00:00
self._ParseCopyFile(project, n)
if n.nodeName == 'annotation':
self._ParseAnnotation(project, n)
2008-10-21 14:00:00 +00:00
return project
def _ParseCopyFile(self, project, node):
src = self._reqatt(node, 'src')
dest = self._reqatt(node, 'dest')
if not self.IsMirror:
# src is project relative;
# dest is relative to the top of the tree
project.AddCopyFile(src, dest, os.path.join(self.topdir, dest))
2008-10-21 14:00:00 +00:00
def _ParseAnnotation(self, project, node):
name = self._reqatt(node, 'name')
value = self._reqatt(node, 'value')
try:
keep = self._reqatt(node, 'keep').lower()
except ManifestParseError:
keep = "true"
if keep != "true" and keep != "false":
raise ManifestParseError, "optional \"keep\" attribute must be \"true\" or \"false\""
project.AddAnnotation(name, value, keep)
2008-10-21 14:00:00 +00:00
def _get_remote(self, node):
name = node.getAttribute('remote')
if not name:
return None
v = self._remotes.get(name)
if not v:
raise ManifestParseError, \
"remote %s not defined in %s" % \
(name, self.manifestFile)
return v
def _reqatt(self, node, attname):
"""
reads a required attribute from the node.
"""
v = node.getAttribute(attname)
if not v:
raise ManifestParseError, \
"no %s in <%s> within %s" % \
(attname, node.nodeName, self.manifestFile)
return v